search for: gatway

If I want to use IAX instead of SIP, do I need to get gateway that support IAX. Are there such gateways? I plan to connect 3 to 4 standard phones via gateway with * In addition I don't want to use SIP to setup VoIP. IAX is more suitable for communication over firewall. -- #Joseph

hi, i wann to make multigateway routing and i read ur how to on http://lartc.org/howto/lartc.rpdb.multiple-links.html and create some rules which i am sending u, but with this rules i am not able to do multigateway routing on my linux router so plz help me out. thanks the rules are given below IF0=eth0 IF1=eth1 IF2=eth2 IP1=192.168.1.2 IP2=61.246.243.86 P1=192.168.1.1 P2=61.246.243.81

Excuse me form reposting the quesiton, but I didn''t find any solution. Any suggestion is welcome Hi, I''m running a Debian 2.2r2 on a university server with 3 public ip o(1.1.1.1 2.2.2.2 and 3.3.3.3 on one ethernet card (but soon we will have three cards). There''s a tunnel (implemented with vtund on a tun interface with local address 192.168.1.10 and remote

How do I route all the outgoing calls through a SIP gateway, this should send more than one outgoing call to the sip gateway at once. please show me the sample configurations on how to do this. my SIP gatway can accecpt direct IP traffic or SIP proxy traffc. Thank You Kanishka -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050223/6f9ff4c3/attachment.htm

...on each of the servers, probably with a 192.168.x.x address so that I could have some daemon on server A listen to say 192.168.1.1 only and have server B connect to that daemon through the tinc VPN from 192.168.1.2 for example. I think all the samples work from the assumption that the servers are gatways that have networks behind them. I have setup my boxes according to the samples, but I cannot ping between the virtual interfaces. Any hints would be welcome. I am not sure, but would this be bridging that I am looking for? I don't actually think so. Regards, Torsten

ClarkConnect Home 3.2 eth0 - WAN - inet - ip:192.168.1.2 gw:192.168.1.1 (connected to my www.woosh.co.nz gatway) wlan - WAN - private community wireless networt - ip:10.252.16.16 gw:10.252.16.1 eth1 - LAN - ip:192.168.2.1 # route add -net 10.0.0.0 netmask 255.0.0.0 gw 10.252.16.1 [root@bowenvale etc]# route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 10.252.16.0 * 255....

...SL line (512/256Kbps) to connect from the internet to my Asterisk server.. At a point I will run out of bandwidth so the cheapest option would be to add a second ADSL line.. The problem is how will the routing work? If I put 2 IP's on one NIC will the return traffice be routed back via the gatway of the IP that is was recieved on or will it try and route all outbound traffic via the primary IP's gateway?? Would it be better to add 2 NICs instead of 2 IP's on one NIC?? although I don't see that this would change the routing logic.. Has anyone played with this type of setup?...

Skipped content of type multipart/mixed-------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 186 bytes Desc: OpenPGP digital signature Url : http://lists.digium.com/pipermail/asterisk-users/attachments/20061103/b35592e2/signature.pgp

...a follow-up. But, since you've noticed ... To clarify: Without the Sonicwall, host 192.168.0.2 (DC) had the ISP's gateway 98.102.63.105 configured. All the LAN workstations had 192.168.0.2 (DC) set as the gateway (route command output). The dhcpcd client sets the IP, mask, nameserver and gatway so *it* set the DC as the gateway, not me directly. Regardless, this had worked for years. When I configured the Sonicwall (IP 192.168.0.1), it got configured with the ISP gateway. I configured the DC (192.168.0.2) gateway with the Sonicwall's IP: 192.168.0.1. Since the DC is still the DHC...

I am trying to figure out the best way to install Mailman, or any other mailing list software in a mail cluster, i.e. two postfix smtp gatways, two squirrelmail webmail servers, failover cyrus imap servers.. I initially installed it on the same machine as the imap server since this is where the mail ends up and only is delivered through one machine. I have other just technical kludges, like propogating the mailman aliases to the smt...

Hi all, we use * as a voip gateway using h323 (chan_h323). We purchased the g729 codec from digium for 10 channels. But, if comes in a call from a cisco gatway or something similar, there're problems with the codecs. If such a call comes in following error occures : Pitch 1st subfr. ! ! Wrong Pitch 1st subfr. ! ! Wrong Pitch 1st subfr. ! ! Wrong Pitch 1st subfr. ! ! Wrong Pitch 1st subfr. ! ! Wrong Pitch 1st subfr. ! ! Wrong Pitch 1...

Hi I've problem with incoming call quality to GSM gateway connected to beronet card (BN8S0), -----> [ GSM Gateway ] -------> [ BN8S0 ] ==== asterisk Port connected to GSM gatway is in TE mode , gateway is in NT mode , When I dialin to cellphone numer , call goes to 'from-eragsm' context, to Echo application. [from-eragsm] exten => 700,1,Goto(600,1) exten => 600,1,Answer() exten => 600,2,Playback(demo-echotest) exten => 600,n,Echo exten => 600,n,Pla...

My username is AaronAnderson I want to create wiki pages for community use with instructions on how to do common post-install tasks such as Configuring a multi-client OpenVPN server, or adjusting fonts, or installing LAMP, or replacing apache with lighttpd. All things I have documented on a personal wiki... It's time to share. Aaron

...1 and R2 both connect to internal destination server S1 Due to software restrictions have to use one default route. Simple script to validate gw availablilty and swap if necessary Reqirements Returning traffic from incoming connections over the same router as where it originated. i.e. If default gatway is set to be R1 incoming connections are fine if originated on connection R1. However connections initiated through R2 timeout. Have tried numerous combinations of iptables, iproute2 and cannot get it to work. Is it possible to mark which router the traffic originated and push the return traf...

I'm having a wierd problem. Somewhere around 1-2% of the time, the first DTMF digit dialed gets dropped. This is occurring during a SpeechBackground application call. If the caller reenters the digits when given a second chance, all is OK. Any suggestions how to debug this intermittent problem?

Hi Alexander, The kind of firewall i have uses the basic iptables which came with the installation CDs of linux-SuSE. I installed SuSE 8.1 which has a firewall that has to be activated. But now, u know, i can't find the file containing the iptables so as to adjust the rules. When i try "iptables -L" in console mode i can see all the rules. I think i need to add some new rules

Ok, there are cool complex products such as SHOUTcast and icecast, but is there some simplier solution? What i need is simple plugin, allowing other guys in home LAN listen the same thing that i do? I do not want to download/install/setup one more program such as server. I do not need complex things. Just one and very simple - share my current winamp sound. --- >8 ---- List archives:

...work should not be run in switched mode. Our site uses 2001:470:780f::/56 - Each ap gets a single /64 network, to be distributed to its wireless clients. Example: ap 1: 2001:470:780f:1::/64 ap 2: 2001:470:780f:2::/64 etc. One tinc-node ist providing internet-access and should be used as default gatway for all services (route ::/0). Furthermore a private IPv4 network ist deployed in advance - each node gets a private IPv4-range as well ap 1: 10.0.1.0/24 ap 2: 10.0.2.0/24 Again, one node is used as a default gateway (route 0.0.0.0/0) However, I'm still uncertain on my host configurations - I...

Hello Everyone, I have set up a xen server with 10 physical network devices using the bridge mode of XEN. This is because I want to split and separate the network traffic for security reasons. Maybe the best way is to use pci back hide. But I want to understand what is going on here. For all testings I have only activated eth[0-3]. My first tests were successful. I have created a VM using

hello, i met a problem in configuratiion of ipv6 gw in my box i install centos 6.3 (64 bit) on my boxs, which have four netcard. i use a straight-through cable to connect centosv0:netcard-2 and centosv1:netcard2 the topology is this: client c(windows xp) <-->centosv0:netcard-3 <--> centosv0:netcard-2 <---> centosv1:netcard-2 <---->centosv1:netcard-2 <---> client d