Displaying 4 results from an estimated 4 matches for "fxorxgain".
2011 Sep 28
0
Increasing the fxorxgain and fxotxgain for the hardware of the digium card
Hi All;
In the zaptel, we were increasing the gain of the voice volume at the hardware level from the /etc/zaptel and /etc/modprob.conf files, but now we are using DAHDI, so where to do the same thing?
I am looking actually to increase the volume at hardware level and not software to avoid the DTMF detection problem and to have better voice quality.
Any advise?
Regards
Bilal
2008 Jul 14
4
Zaptel problem with pots lines
...aker version: 73
kernel: Freshmaker passed register test
kernel: ProSLIC on module 0, product 3, version 15
kernel: VoiceDAA System: 04
kernel: ISO-Cap is now up, line side: 03 rev 06
kernel: setting FXO tx gain for card=0 to 0
kernel: setting FXO rx gain for card=0 to 0
kernel: DEBUG fxotxgain:0.0 fxorxgain:0.0
kernel: Module 0: Installed -- AUTO FXO (FCC mode)
kernel: ProSLIC on module 1, product 0, version 0
kernel: VoiceDAA System: 04
kernel: ISO-Cap is now up, line side: 03 rev 06
kernel: setting FXO tx gain for card=1 to 0
kernel: setting FXO rx gain for card=1 to 0
kernel: DEBUG fxotxgain:0.0 fx...
2008 Jan 07
0
asterisk-users] Increase Volume - SIP
...s originated from the Mobile
(or PSTN) and you call to Zaptel and then do the call
via SIP (or IAX) Trunk? Or you are facing a low volume
when you call from FXS (or from IP Phone)?
There is a way to increase the volume on the fxs or
fxo ports by using the following:
modprobe zaptel
modprobe wctdm fxorxgain=12 (or more)
But asterisk should not be running, and you should
unload zaptel and then reload it (as it takes this
argument only when loading), and you need to do it
each time you restart the machine (or it can be
hardcoded if you found a good result).
To unload zaptel, use modprobe - r zaptel an...
2008 Jan 07
2
Increase Volume - SIP
Hi guys,
Can someone tell me if there is a way to increase the volume of a conversation that occurs between two SIP channels or between a SIP and an IAX channel ?
My headsets are set to the maximum volume but the voice is still low ... I know there is a configuration in zapata.conf for the digium cards, but is there a place I can set this up for RTP conversations ?
Thanks,