search for: fwrev

...bringup ioc0: 53C1030: Capabilities={Initiator,Target} ACPI: PCI Interrupt 0000:04:05.1[B] -> GSI 19 (level, low) -> IRQ 19 mptbase: Initiating ioc1 bringup ioc1: 53C1030: Capabilities={Initiator,Target} Loading mptscsih.ko module Fusion MPT SCSI Host driver 3.01.20 scsi0 : ioc0: LSI53C1030, FwRev=01032300h, Ports=1, MaxQ=255, IRQ=18 Vendor: FUJITSU Model: MAP3735NC Rev: 5608 Type: Direct-Access ANSI SCSI revision: 03 SCSI device sda: 143374650 512-byte hdwr sectors (73408 MB) SCSI device sda: drive cache: write through SCSI device sda: 143374650 512-byte...

...initialized Fusion MPT base driver 3.02.18 Copyright (c) 1999-2005 LSI Logic Corporation ACPI: PCI interrupt 0000:02:03.0[A] -> GSI 28 (level, low) -> IRQ 209 mptbase: Initiating ioc0 bringup ioc0: SAS1064: Capabilities={Initiator} Fusion MPT SCSI Host driver 3.02.18 scsi0 : ioc0: LSISAS1064, FwRev=01040000h, Ports=1, MaxQ=203, IRQ=209 Vendor: FUJITSU Model: MAV2073RCSUN72G Rev: 0301 Type: Direct-Access ANSI SCSI revision: 04 SCSI device sda: 143374738 512-byte hdwr sectors (73408 MB) SCSI device sda: drive cache: write through sda: sda1 sda2 sda3 Attached scsi...

...6:08:33 server kernel: Nov 21 06:08:33 server kernel: ide: failed opcode was: unknown Nov 21 06:08:33 server kernel: hda: no DRQ after issuing WRITE Nov 21 06:08:34 server kernel: ide0: reset: success Found one website that told me too try hdparm -i to see whats up: /dev/hda: Model=ST3500320AS, FwRev=SD15, SerialNo= Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs RotSpdTol>.5% } RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=4 BuffType=unknown, BuffSize=0kB, MaxMultSect=16, MultSect=off CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=268435455 IORDY=on/off, tPIO...

We run several RH7.2/7.3 servers & recently 2 of them, although still working fine, have started to show kjournald as generally using over 50% cpu% on 'top' - virtually continuously. Free cpu% generally less than 25% now! Both machines are also using software RAID5 EIDE ....... otherwise are standard server installs. Any info on what kjournald is & why it should have recently

...5.265020] ioc0: LSISAS1064E B2: Capabilities={Initiator} [ 5.277276] no ownder 5.277276] no ownder [ 5.282441] mptbase: ioc0: PCI-MSI enabled [ 24.397417] mptbase: ioc0: Initiating recovery [ 54.917063] mptbase: ioc0: Initiating recovery [ 103.067093] scsi0 : ioc0: LSISAS1064E B2, FwRev=01182b00h, Ports=1, MaxQ=286, IRQ=252 [ 113.084555] mptbase: ioc0: Initiating recovery [ 143.599536] mptbase: ioc0: Initiating recovery [ 163.416806] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 163.431202] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 163.472335] ACPI: A...

Hello Folks, We have 2 (identical hardware) busy public 2U rack servers, both have several hundred users & peak email (for example) deliveries at 300/5min during the daytime. Both servers run RAID1 over 2 EIDE disk drives. One server is fine - it never has problems - it is running RH7.3 and CPU loads are normal. The other server has constant disk activity & kjournald at CPU load of

...2 guest install: # hdparm -tT /dev/hda /dev/hda: Timing buffer-cache reads: 27000 MB in 2.00 seconds = 13500.00 MB/sec Timing buffered disk reads: 12 MB in 3.66 seconds = 3.28 MB/sec On that system, the hdparm's -i output shows: # hdparm -i /dev/hda /dev/hda: Model=QEMU HARDDISK, FwRev=0.12.1, SerialNo=QM00001 Config={ Fixed } RawCHS=16383/16/63, TrkSize=32256, SectSize=512, ECCbytes=4 BuffType=DualPortCache, BuffSize=256kB, MaxMultSect=16, MultSect=16 CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=73400320 IORDY=yes, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:1...

Hello I do have problem using Linux with an external HP tape drive. The server platform is also an HP Server; the server is an HP ML350 G4, and the Tape drive is a HP Storage Works Ultrium 448 - 1U Rack-mountable. HP Ultrium documentation says two drivers should be automatically up, sym53c8xx for LSI SCSI interface "st" for tape and /proc/scsi/scsi should contain information about

...(rw) /dev/hda1 on /mnt/win type vfat (rw) I send you the hdparm informations, on the hdd I changed from udma5 to udma4, suggested me on the dell-linux mailing list. It seams I have lesser problems, but they persist. [root@inspiron root]# hdparm -i /dev/hda /dev/hda: Model=HITACHI_DK23CA-30, FwRev=00H0A0G1, SerialNo=11BPWF Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs } RawCHS=16383/16/63, TrkSize=36477, SectSize=579, ECCbytes=4 BuffType=DualPortCache, BuffSize=2048kB, MaxMultSect=16, MultSect=16 CurCHS=16383/16/63, CurSects=-66060037, LBA=yes, LBAsects=58605120 IORDY=...

...5.265020] ioc0: LSISAS1064E B2: Capabilities={Initiator} [ 5.277276] no ownder 5.277276] no ownder [ 5.282441] mptbase: ioc0: PCI-MSI enabled [ 24.397417] mptbase: ioc0: Initiating recovery [ 54.917063] mptbase: ioc0: Initiating recovery [ 103.067093] scsi0 : ioc0: LSISAS1064E B2, FwRev=01182b00h, Ports=1, MaxQ=286, IRQ=252 [ 113.084555] mptbase: ioc0: Initiating recovery [ 143.599536] mptbase: ioc0: Initiating recovery [ 163.416806] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 163.431202] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 163.472335] ACPI: A...

...enever a disk write of more than a few MB is made. iostat shows the disk at 100%. [root at marge ~]# uname -a Linux marge.gizmopartners.com 2.6.18-164.6.1.el5 #1 SMP Tue Nov 3 16:18:27 EST 2009 i686 i686 i386 GNU/Linux [root at marge ~]# hdparm -i /dev/hda /dev/hda: Model=WDC WD2000JB-00GVC0, FwRev=08.02D08, SerialNo=WD-WCAL83129186 Config={ HardSect NotMFM HdSw>15uSec SpinMotCtl Fixed DTR>5Mbs FmtGapReq } RawCHS=16383/16/63, TrkSize=57600, SectSize=600, ECCbytes=74 BuffType=DualPortCache, BuffSize=8192kB, MaxMultSect=16, MultSect=16 CurCHS=16383/16/63, CurSects=16514064, LBA=yes, L...

...e first question is whether my disk is really not optimum. Any help or help would be appreciated Or if you need more info just ask. ned blurock Here is some less vague info: ---------------------------------------------------------------- hdparm -i /dev/hda /dev/hda: Model=IC25N040ATCS05-0, FwRev=CS4OA63A, SerialNo=CLP425F4GJUT9A Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs } RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=4 BuffType=DualPortCache, BuffSize=7898kB, MaxMultSect=16, MultSect=16 CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=78140160 IORDY...

...GB Quantum IDE hard drive to the server. I have set it up as a MASTER on a separate IDE channel. Two partitions on the /dev/hdc are /dev/hdc1, /dev/hdc2 - both using ext3. For more detailed HDD parameters, this is 'hdparm -i /dev/hdc': ----------------- /dev/hdc: Model=IC35L060AVV207-0, FwRev=V22OA66A, SerialNo=VNVB30G8TD23UH Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs } RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=52 BuffType=DualPortCache, BuffSize=1821kB, MaxMultSect=16, MultSect=16 CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=66055248 IORDY=on/...

I have a sles10sp3 vm that I''m trying to passthrough a scsi card, which has a DLT tape drive attached. Anyone doing anything similar? When I passthrough the scsi card (forced to do both ports), the vm dies when it loads, I think during udev. I''m viewing the vm through virt-manager, so I can''t scroll up and see what everything says. Is there a way to get the text xm

...#1 SMP PREEMPT Mon Aug 17 08:52:28 CEST 2015 Memory: 32840088K/33447336K available (5699K kernel code, 893K rwdata, 1732K rodata, 1180K init, 1152K bss, 607248K reserved, 0K cma-reserved) 06:00.0 VGA compatible controller: NVIDIA Corporation GK107 [GeForce GT 640] (rev a1) Model=TOSHIBA MD04ACA500, FwRev=FP2A --- Plugged into motherboard SATA, no SATA controllers KDE plasma-desktop/workspace 5.4.1-2 nouveau driver 1.0.11-3 -- You are receiving this mail because: You are the assignee for the bug. -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.freed...

...t; IRQ 53 mptbase: Initiating ioc0 bringup ioc0: 53C1030: Capabilities={Initiator} ACPI: PCI interrupt 0000:06:02.1[B] -> GSI 29 (level, low) -> IRQ 54 mptbase: Initiating ioc1 bringup ioc1: 53C1030: Capabilities={Initiator} Fusion MPT SCSI Host driver 3.01.09 scsi0 : ioc0: LSI53C1030, FwRev=01030600h, Ports=1, MaxQ=255, IRQ=53 Using anticipatory io scheduler Vendor: SEAGATE Model: ST318406LC Rev: 8A03 Type: Direct-Access ANSI SCSI revision: 03 SCSI device sda: 35566478 512-byte hdwr sectors (18210 MB) SCSI device sda: drive cache: write through...

...no fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr syscall mmxext 3dnowext 3dnow bogomips : 2025.06 hdparm -i /dev/hda /dev/hda: Model=Maxtor 6Y080L0, FwRev=YAR41BW0, SerialNo=Y2M0FH0E Config={ Fixed } RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=57 BuffType=3(DualPortCache), BuffSize=2048kB, MaxMultSect=16, MultSect=16 DblWordIO=no, OldPIO=2, DMA=yes, OldDMA=0 CurCHS=4047/16/255, CurSects=-217054981, LBA=yes, LBAsects=160086528 tDMA={min...

...fb4>] [<c0145f0b>] [<c0111d0c>] [<c0145ffc>] [<c0146122>] [<c0108f4b>] Jun 24 19:24:10 server kernel: Code: 0f 0b 31 04 ca db a0 e2 eb b5 8b 45 0c 85 c0 75 1c 8b 54 24 /usr/sbin/hdparm -i /dev/hdb= (old, but still works :) /dev/hdb: Model=WDC AC310200R, FwRev=15.01J15, SerialNo=WD-WT6750028428 Config={ HardSect NotMFM HdSw>15uSec SpinMotCtl Fixed DTR>5Mbs FmtGapReq } RawCHS=16383/16/63, TrkSize=57600, SectSize=600, ECCbytes=40 BuffType=DualPortCache, BuffSize=512kB, MaxMultSect=16, MultSect=16 CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LB...

I am currently testing an Overland Tape storage unit with a LTO-3 drive on CentOS 4.4. After a random amount of time but usually when we have backed up about 0.5-1TB we get scsi errors which cause the backup to fail. I have rebuilt the box with Solaris 10 x86 and Windoze to prove the hardware and have successfully backed up over 3TB on each OS without error. Can anyone offer advice on how to find

How do I check if the proper sata drivers are being loaded? If they are not what can I do other then rebuilding the kernel? Thank you in advance, Randy _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users