search for: ftups

hi: my testing server has two power supply and attach to two ups. one of the ups is connect to the server with usb. my upsmon.conf like below: # for two ups MONITOR ftups at localhost 1 monmaster nutmaster master MONITOR ftups at 10.1.1.2 1 monslave nutslave slave MINSUPPLIES 1 # for early shutdown NOTIFYFLAG ONBATT EXEC+WALL+SYSLOG NOTIFYFLAG ONLINE EXEC+WALL+SYSLOG NOTIFYCMD /usr/sbin/upssched the early shutdown script use "upsmon -c fsd" to set F...

...e ups: 10kv online, 3kv online, 2kv offline. all the battery.voltage are fine and the same value as 2.7.4. the battery.charge report of 10kv and 3kv are fine. but 2kv is wrong. with 2.7.4 the 2kv battery.charge is reporting 100. but the new code is reporting 67. details below: 10KV: ./nutdrv_qx -a ftups -d1 Network UPS Tools - Generic Q* USB/Serial driver 0.33 (Windows-v2.8.0-alpha3-1252-g757813e) USB communication driver (libusb 0.1) 0.44 Using protocol: Voltronic 0.07 battery_number: 20 battery_number, settable range: 1..9 bypass_alarm: enabled battery_alarm: enabled bypass_when_off: disabled al...

...e ups: 10kv online, 3kv online, 2kv offline. all the battery.voltage are fine and the same value as 2.7.4. the battery.charge report of 10kv and 3kv are fine. but 2kv is wrong. with 2.7.4 the 2kv battery.charge is reporting 100. but the new code is reporting 67. details below: 10KV: ./nutdrv_qx -a ftups -d1 Network UPS Tools - Generic Q* USB/Serial driver 0.33 (Windows-v2.8.0-alpha3-1252-g757813e) USB communication driver (libusb 0.1) 0.44 Using protocol: Voltronic 0.07 battery_number: 20 battery_number, settable range: 1..9 bypass_alarm: enabled battery_alarm: enabled bypass_when_off: disabled al...

...'t shutdown since UPSB is stale/dead. in Server A situation, I want to assume UPSA is "alive/no need shutdown" when it is stale, but I want to assume UPSB is "dead/need shutdown" when it is stale. to accomplish that, maybe uspmon can have a flag to indicate that: MONITOR ftups at localhost 1 monmaster passmaster master alive MONITOR ftups at 10.1.1.1 1 monslave nutslave slave dead maybe there are other situations that people want to declare "stale" ups as "dead/need shutdown".. Regards, tbskyd

Cheers, One PR waiting to get into 2.8.1 release timeframe is https://github.com/networkupstools/nut/pull/1652 stemming from issue https://github.com/networkupstools/nut/issues/1279 The gist of it is that "battery.voltage" and "battery.charge" were not always reported correctly with nutdrv-qx driver (might be handled better by blazer drivers though), and the overrides

...after shutdown with delay command (seconds) Type: NUMBER Value: 0 [ups.delay.start] Interval to wait before (re)starting the load (seconds) Type: NUMBER Value: 0 [ups.id] UPS system identifier Type: STRING Maximum length: 16 Value: APC UPS >upscmd -l myups Instant commands supported on UPS [ftups]: beeper.mute - Temporarily mute the UPS beeper bypass.start - Put the UPS in bypass mode bypass.stop - Take the UPS out of bypass mode calibrate.start - Start run time calibration calibrate.stop - Stop run time calibration driver.killpower - Tell the driver daemon to initiate UPS shutdown; should...

...after shutdown with delay command (seconds) Type: NUMBER Value: 0 [ups.delay.start] Interval to wait before (re)starting the load (seconds) Type: NUMBER Value: 0 [ups.id] UPS system identifier Type: STRING Maximum length: 16 Value: APC UPS >upscmd -l myups Instant commands supported on UPS [ftups]: beeper.mute - Temporarily mute the UPS beeper bypass.start - Put the UPS in bypass mode bypass.stop - Take the UPS out of bypass mode calibrate.start - Start run time calibration calibrate.stop - Stop run time calibration driver.killpower - Tell the driver daemon to initiate UPS shutdown; should...

Got an update for APC Modbus users: a new PR is waiting for real-life testing for settable variables and instant commands support. https://github.com/networkupstools/nut/pull/2184 As before, a custom build of libmodbus may be needed for USB support (detailed in the earlier PR), but Serial and TCP may already be well served by a distro near you! Jim On Sun, Oct 22, 2023, 01:08 Jim Klimov

Got an update for APC Modbus users: a new PR is waiting for real-life testing for settable variables and instant commands support. https://github.com/networkupstools/nut/pull/2184 As before, a custom build of libmodbus may be needed for USB support (detailed in the earlier PR), but Serial and TCP may already be well served by a distro near you! Jim On Sun, Oct 22, 2023, 01:08 Jim Klimov

...> [ups.delay.start] > Interval to wait before (re)starting the load (seconds) > Type: NUMBER > Value: 0 > > [ups.id] > UPS system identifier > Type: STRING > Maximum length: 16 > Value: APC UPS > > > >upscmd -l myups > Instant commands supported on UPS [ftups]: > > beeper.mute - Temporarily mute the UPS beeper > bypass.start - Put the UPS in bypass mode > bypass.stop - Take the UPS out of bypass mode > calibrate.start - Start run time calibration > calibrate.stop - Stop run time calibration > driver.killpower - Tell the driver daemo...

...> [ups.delay.start] > Interval to wait before (re)starting the load (seconds) > Type: NUMBER > Value: 0 > > [ups.id] > UPS system identifier > Type: STRING > Maximum length: 16 > Value: APC UPS > > > >upscmd -l myups > Instant commands supported on UPS [ftups]: > > beeper.mute - Temporarily mute the UPS beeper > bypass.start - Put the UPS in bypass mode > bypass.stop - Take the UPS out of bypass mode > calibrate.start - Start run time calibration > calibrate.stop - Stop run time calibration > driver.killpower - Tell the driver daemo...

Hello fellow NUTs :) It is my great pleasure to get a bit of sunshine from other people's work, and announce that the initial pull request for `apc_modbus` NUT driver has recently been merged to the main NUT codebase, so it would be part of an eventual 2.8.1 release. Great thanks go to Axel Gembe for the implementation, and to numerous community members for testing as well as their bug-fix

Hello fellow NUTs :) It is my great pleasure to get a bit of sunshine from other people's work, and announce that the initial pull request for `apc_modbus` NUT driver has recently been merged to the main NUT codebase, so it would be part of an eventual 2.8.1 release. Great thanks go to Axel Gembe for the implementation, and to numerous community members for testing as well as their bug-fix

...fore (re)starting the load (seconds) >> Type: NUMBER >> Value: 0 >> >> [ups.id] >> UPS system identifier >> Type: STRING >> Maximum length: 16 >> Value: APC UPS >> >> >> >upscmd -l myups >> Instant commands supported on UPS [ftups]: >> >> beeper.mute - Temporarily mute the UPS beeper >> bypass.start - Put the UPS in bypass mode >> bypass.stop - Take the UPS out of bypass mode >> calibrate.start - Start run time calibration >> calibrate.stop - Stop run time calibration >> driver.killp...

...fore (re)starting the load (seconds) >> Type: NUMBER >> Value: 0 >> >> [ups.id] >> UPS system identifier >> Type: STRING >> Maximum length: 16 >> Value: APC UPS >> >> >> >upscmd -l myups >> Instant commands supported on UPS [ftups]: >> >> beeper.mute - Temporarily mute the UPS beeper >> bypass.start - Put the UPS in bypass mode >> bypass.stop - Take the UPS out of bypass mode >> calibrate.start - Start run time calibration >> calibrate.stop - Stop run time calibration >> driver.killp...