Displaying 16 results from an estimated 16 matches for "ftdi_sio".
2013 Mar 20
0
Newer version of ftdi_sio
I have just bought an FTDI USB UART
New USB device found, idVendor=0403, idProduct=6015
New USB device strings: Mfr=1, Product=2, SerialNumber=3
Product: FT231X USB UART
Manufacturer: FTDI
However this appears to be slightly too new for the ftdi_sio driver in
C6.4; it's not detected.
If I force it
modprobe ftdi_sio vendor=0x0403 product=0x6015
then it gets detected as a FT232RL which is _close_... but doesn't seem
to quite work. If I use "kermit -l /dev/ttyUSB0 -C 'transmit foo,quit'"
then I get "Timeout&qu...
2014 Feb 26
0
NUT v2.7.1 - Not working on UPS SOLA BASIC SR MICRONET XRN-21-481
...The problem is that the "isbmex" driver was written for a serial-only UPS, and I don't think we have any information on the USB protocol.
However, the manufacturer's driver package indicates that this might be a FTDI serial converter.
Please try the following:
$ sudo modprobe ftdi_sio vendor=0x0483 product=0x0035
and see if you get a new /dev/ttyUSB* device node.
--
Charles Lepple
clepple at gmail
2014 Feb 27
1
NUT v2.7.1 - Not working on UPS SOLA BASIC SR MICRONET XRN-21-481
Hi Charles!
Thanks a lot for your response.
Now I figure why the isbmex driver was not working. On the other hand I've
tried to run the command suggested. But no success.
I got this information when running the dmesg command after running the
modprobe
$ sudo modprobe ftdi_sio vendor=0x0483 product=0x0035
[35816.111760] usbcore: registered new interface driver usbserial
[35816.111792] usbcore: registered new interface driver usbserial_generic
[35816.111814] usbserial: USB Serial support registered for generic
[35816.136413] usbcore: registered new interface driver ftdi_...
2018 Apr 27
1
Question about "generic" USB <=> Serial Port kernel drivers...
...ivial since my Internet connection is via dialup).
I recently bought a couple of Adafruit Arduino compatibles, a Flora and a
Metro 328. Hooking up the Flora and the Metro to a Raspberry Pi running
Raspbian (kernel 4.9.35-v7+), tells me that the Metro 328's USB uses a FTDI
USB serial interface (ftdi_sio.ko) and the Flora uses the cdc_acm (cdc-acm.ko)
USB serial interface. Both of these drivers are available with CentOS 6's
kernel, but since Adafruit uses their own Vendor & Product IDs and my (old)
kernel's ftdi_sio and cdc-acm drivers don't have Adafruit Vendor & Product
IDs, t...
2014 Feb 26
2
NUT v2.7.1 - Not working on UPS SOLA BASIC SR MICRONET XRN-21-481
I got a UPS Sola Basic but it is not working, I'm providing the details. I
hope that someone can help me to get it working.
Please let me know if there is some other information that I should provide
:)
OS name and version
Ubuntu 12.04
$ uname -a
Linux olimpo 3.8.0-29-generic #42~precise1-Ubuntu SMP Wed Aug 14 16:19:23
UTC 2013 x86_64 x86_64 x86_64 GNU/Linux
Exact NUT version,
2.7.1
2015 Nov 30
3
RS-232 Port with Nut
Hello All,
I am trying to read my Eaton 5P 1550 with the Rs-232 port but I cannot get nut to read the driver from my Rs-232 to USB adaptor.
When I perform lsusb -t it says my B&B electronics adaptor uses driver
ftdi_sio
How do I get the nut to read information coming from that??
Thanks,
Connor
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alioth.debian.org/pipermail/nut-upsdev/attachments/20151130/22417f31/attachment.html>
2023 Jan 23
1
Attach a GPS in preboot mode
...1-0000:00:05.7-4||
||janv. 23 21:26:22 vm-bullseye kernel: usbcore: registered new
interface driver usbserial_generic||
||janv. 23 21:26:22 vm-bullseye kernel: usbserial: USB Serial support
registered for generic||
||janv. 23 21:26:22 vm-bullseye kernel: usbcore: registered new
interface driver ftdi_sio||
||janv. 23 21:26:22 vm-bullseye kernel: usbserial: USB Serial support
registered for FTDI USB Serial Device||
||janv. 23 21:26:22 vm-bullseye kernel: ftdi_sio 3-2:1.0: FTDI USB
Serial Device converter detected||
||janv. 23 21:26:22 vm-bullseye kernel: usb 3-2: Detected FT232BM||
||janv. 23 21:2...
2005 Dec 15
0
Kernel panic in usbserial.
...ernel: Oops: 0000 [#1]
Dec 14 23:58:10 smarteyebox kernel: Modules linked in: ppdev nfs lockd radeon
parport_pc lp parport autofs4 eeprom i2c_sensor i2c_i801 i2c_dev i2c_core sunrpc
ds ipt_REJECT ipt_state ip_conntrack iptable_filter ip_tables dm_multipath
button battery ac hci_usb bluetooth joydev ftdi_sio usbserial yenta_socket
pcmcia_core uhci_hcd shpchp snd_intel8x0m snd_intel8x0 snd_ac97_codec
snd_pcm_oss snd_mixer_oss snd_pcm snd_timer snd_page_alloc snd_mpu401_uart
snd_rawmidi snd_seq_device snd soundcore e100 mii floppy dm_snapshot dm_zero
dm_mirror ext3 jbd dm_mod
Dec 14 23:58:10 smarteyebox...
2006 Jan 09
0
Kernel panic in usbserial - now in 2.6.9-22.0.1.106.unsupported, previous in 2.6.9-22.0.1.EL
...ernel: Oops: 0000 [#1]
Dec 14 23:58:10 smarteyebox kernel: Modules linked in: ppdev nfs lockd radeon
parport_pc lp parport autofs4 eeprom i2c_sensor i2c_i801 i2c_dev i2c_core sunrpc
ds ipt_REJECT ipt_state ip_conntrack iptable_filter ip_tables dm_multipath
button battery ac hci_usb bluetooth joydev ftdi_sio usbserial yenta_socket
pcmcia_core uhci_hcd shpchp snd_intel8x0m snd_intel8x0 snd_ac97_codec
snd_pcm_oss snd_mixer_oss snd_pcm snd_timer snd_page_alloc snd_mpu401_uart
snd_rawmidi snd_seq_device snd soundcore e100 mii floppy dm_snapshot dm_zero
dm_mirror ext3 jbd dm_mod
Dec 14 23:58:10 smarteyebox...
2017 Aug 17
1
New powercom device?
...gt; http://networkupstools.org/stable-hcl.html?manufacturer=Powercom&connection=USB
> )
OK, thanks! I read up about the stuff in the last paragraph, and it's
not clear to me what I need to do to test this out.
% ls /lib/modules/`uname r`/kernel/drivers/usb/serial/
ch341.ko cp210x.ko ftdi_sio.ko
% lsusb
Bus 004 Device 003: ID 0d9f:0002 Powercom Co., Ltd Black Knight PRO /
WOW Uninterruptible Power Supply (Cypress HID->COM RS232)
Bus 004 Device 001: ... root hub
...
%
The debian docs say: Look at the output of lsusb, and if it identifies
the serial device, try installing the appropr...
2015 Dec 01
3
RS-232 Port with Nut
...arks, Connor" <Connor.Marks at emc.com> ?????:
>Hello All,
>
>I am trying to read my Eaton 5P 1550 with the Rs-232 port but I cannot
>get nut to read the driver from my Rs-232 to USB adaptor.
>When I perform lsusb -t it says my B&B electronics adaptor uses driver
>ftdi_sio
>
>How do I get the nut to read information coming from that??
>
>Thanks,
>Connor
>
>
>-----------------------------------------------------------------------
>-
>
>_______________________________________________
>Nut-upsdev mailing list
>Nut-upsdev at lists.a...
2008 Aug 31
0
crash at shutdown
...gistered new driver usbserial
drivers/usb/serial/usb-serial.c: USB Serial support registered for generic
usbcore: registered new driver usbserial_generic
drivers/usb/serial/usb-serial.c: USB Serial Driver core
drivers/usb/serial/usb-serial.c: USB Serial support registered for
FTDI USB Serial Device
ftdi_sio 4-2:1.0: FTDI USB Serial Device converter detected
drivers/usb/serial/ftdi_sio.c: Detected FT232BM
usb 4-2: FTDI USB Serial Device converter now attached to ttyUSB0
usbcore: registered new driver ftdi_sio
drivers/usb/serial/ftdi_sio.c: v1.4.3:USB FTDI Serial Converters Driver
input: PC Speaker as /...
2015 Nov 30
0
RS-232 Port with Nut
...;Marks, Connor" <Connor.Marks at emc.com> ?????:
>Hello All,
>
>I am trying to read my Eaton 5P 1550 with the Rs-232 port but I cannot
>get nut to read the driver from my Rs-232 to USB adaptor.
>When I perform lsusb -t it says my B&B electronics adaptor uses driver
>ftdi_sio
>
>How do I get the nut to read information coming from that??
>
>Thanks,
>Connor
>
>
>------------------------------------------------------------------------
>
>_______________________________________________
>Nut-upsdev mailing list
>Nut-upsdev at lists.alioth...
2017 Aug 10
2
New powercom device?
In a separate discussion, on 6/26/17 4:04 AM, Arnaud Quette wrote:
> Hi
>
> If you're sure it's a HID device, add an entry in drivers/powercom-hid.c
> { USB_DEVICE(POWERCOM_VENDORID, 0x0002), NULL },
>
> Then autogen.sh + configure...
> Please also report back so that I can update the code
>
> Cheers
> Arno
Thanks!
I don't *know* whether or not
2006 Sep 04
8
How to get 4.3 updates without 4.4 upgrade
Well, I want to stay on an even keel, here with 4.3 for a week or two.
I would like to update needed programs.
Would also like to get a newer gnome!
What are others doing here. Too much traffic, too much to read....
2009 May 05
5
HandBrakeCLI crashes when converting
Hello!
At first, i want to run the latest HandBrake (version 0.93) on a Mac with Mac OS 10.4 (Tiger).
The problem is, that Handbrake is developed for Mac OS 10.5 (XCode SDK is not compatible to Mac OS 10.4 one).
So i decided to try it with wine/darwine.
Because wine is better supported on Linux and you can get easier newer version (apt-get), i decided to run HandBrakeCLI.exe on Debian Etch