search for: frametypes

...tart------------->8--- library(compiler) compiler::enableJIT(3) --8<---------------cut here---------------end--------------->8--- in ~/.Rprofile for years; now that I upgraded to 3.2.1 I get this on startup: --8<---------------cut here---------------start------------->8--- Error in frameTypes(env) : not a proper evaluation environment Calls: <Anonymous> -> <Anonymous> -> makeCenv -> structure -> frameTypes > q() Warning message: restarting interrupted promise evaluation --8<---------------cut here---------------end--------------->8--- I don't see a...

Hello, Talking with Soren Sratje about Caller ID in Brazil, we compare ours DTMF tones captured by ztmonitor. wcfxo correctly recognize the "DTMF CLIP" and asterisk shot the AST_STATE_PRERING correctly. But the DTMF tones are not reconized. In the chan_zap.c, the code: if (f->frametype == AST_FRAME_DTMF) { (...) Does not occurs because the frametype is always reconized as voice

I have just setup asterisk on a debian sarge box. I am running Asterisk 1.21 with AMP and chan_capi_cm 0.6.1 using a BT Speedway (AVM Fritz) ISDN card, connected to a BT ISDN2e line. Currently we have 6 extensions (SIP) configured all using CounterPath(Xten) eyebeam softphone. After many hours of Googling I have finally got it all setup and working. We can transfer calls internally and make and

Hello guys, I have searched high and low, but not found any information about rules of using DTMF in SIP INFO method. Cisco has described something with Signal=, but it look like this feature is dependent on implementors? The problem is chan_sip.c cannot correctly translate received DTMF digits, especially #,*. At least with my Antek EGW-804 gateway. Looking into chan_sip.c, I found this code:

I'm getting a SIGSEGV at ast_slinear_saturated_multiply at the line: 351 res = (int) *input * *value; It's called from ast_frame_adjust_volume. The frame looks like: (gdb) print *f $6 = {frametype = AST_FRAME_VOICE, subclass = {integer = 100021, format = { id = AST_FORMAT_SLINEAR16, fattr = {format_attr = { 0 <repeats 64 times>}, rtp_marker_bit = 0

I'm seeing Asterisk crashes with the following frame at func_speex.c:188: (gdb) p *frame $6 = {frametype = AST_FRAME_VOICE, subclass = {integer = 0, format = 0xe2f9e20, frame_ending = 0}, datalen = 0, samples = 640, mallocd = 1, mallocd_hdr_len = 232, offset = 64, src = 0x2ac07413e7f8 "siren14tolin32", data = {ptr = 0x3cab9378, uint32 = 1017877368, pad =

Hi all. I have some problems to hear clearly music on hold, the sound interrupting. this some logs what i have in asterisk : rtp.c:298 process_rfc3389: RFC3389 support incomplete RFC3389: 1 bytes, level 8... RFC3389: 1 bytes, level 8... RFC3389: 1 bytes, level 8... RFC3389: 1 bytes, level 8... RFC3389: 1 bytes, level 8... RFC3389: 1 bytes, level 8... RFC3389: 1 bytes, level 8... RFC3389: 1

Hi asterisk-users, We are using Asterisk 1.2.12.1, and are trying to use the Page application. It seems to work but after approx 4-5 seconds the call is hung up. The dialplan code look like this: exten => _*2XX,1,AGI(get-paging-devices.agi,${EXTEN:2}) exten => _*2XX,n,GotoIf($[ "${PAGING_DEVICES}" = "invalid" ]?i,1) exten => _*2XX,n,SIPAddHeader(Call-Info:

Hi, I use a simple scheme: SIP video phone A (h264/Asterisk 1.8.11) <---IAX2 trunk----> SIP video phone B (h264/Asterisk 11.7.0) When calls from A to B and vice versa drop on pickup. On B side: [Oct 24 16:33:49] DEBUG[15590][C-00000012] res_rtp_asterisk.c: Setting the marker bit due to a source update [Oct 24 16:33:49] DEBUG[15590][C-00000012] res_rtp_asterisk.c: Setting the marker bit

Another crash with a packet: $10 = {frametype = AST_FRAME_VOICE, subclass = {integer = 0, format = 0x12c62170, frame_ending = 0}, datalen = 0, samples = 640, mallocd = 1, mallocd_hdr_len = 324, offset = 64, src = 0x2ad290064a08 "siren14tolin32/speex", data = {ptr = 0x80893318, uint32 = 2156475160, pad = "\030\063\211\200\000\000\000"}, delivery = { tv_sec =

Hi list! I'm having some problems with chan_sccp and a Kirk IP600. Basically the handsets work (they emulate a Cisco 7940) but I have the following issues: 1. If a handset is in a conversation and there is a new incoming call, the incoming audio is muted (but the other party can still hear anything spoken on the handset). What is normal Asterisk behaviour, that a handset is left alone

Thanks Paradise, this seems to have worked a treat!!! I commented out the: exten => 110,hint,SIP/110 lines which were in extensions_additional.conf for each sip extension I had. This seems to have stopped the crashes which were previously 3-5 times a day, now: System uptime: 1 day, 18 hours, 10 minutes, 3 seconds Interestingly it had the knock on effect of fixing another problem I had

Hi, I'm trying to get asterisk running on kernel 2.4.20 however trawling through the archives I've found a few references to patches to remove i4l's dtmf detection, but have been unable to find the patch itself (I think it is isdn_audio.c). Can anyone point me in the right direction? The problem I'm seeing is connecting a SIP softphone (tried a few) to an external number via an

Hi there, I'll need some help with this: Trying to establish an IAX2 link between two servers works in one direction (SIP client with ulaw), but not in the other (SIP client with GSM). The client used for this is X-Lite behind NAT while both servers have a public IP (I playback an anouncement before trying to connect to the second *). Error on the originating * server:

Hi all ( dev & user list ), I'm starting to implement the missing features in Meetme application : 's' -- send user to admin/user menu if '*' is received Line 438 -------- app_meetme.c ----------------------------------------------------------------------------- else if ((f->frametype == AST_FRAME_DTMF) && (f->subclass == '*') &&

Hi, I cannot get two Polycom 600 phones to bridge natively. My sip.conf has canreinvite=yes for both phones. They connect, and I can talk as usual, but sniffing shows the RTP stream is routed through Asterisk. The exact spot where the attempt to natively bridge fails is in rtp.c, line 1281 (CVS from October 8, 2003): f = ast_read(who); if (!f || ((f->frametype == AST_FRAME_DTMF)

Hi, I am a beginner in asterisk. Implementing it in my dept in India using TDM400b card with asterisk, zaptel, libpri version latest of CVS HEAD Callerid on my system is coming tough. Asterisk doesnot finishes the callerid spill and Cancells it. After going through code in Callerid.c and chan_zap.c I found that my line is providing caller id of length 8867. Flow enters in zt_call and

Hi List, I am currently using the H parameter in the dial command. The issue that I am having is that if the user is calling an ivr that requires him to press the * key then the call gets hung up on. How would I go about changing it so that the user will have to press say ** for the H parameter to come in to effect ? Thanks a lot. Dovid -------------- next part -------------- An HTML attachment

I would like to be able to stop the chanspy application and go to the next step in the dialplan but I do not see a way to do that. I have looked at the code and I do not see a way to stop the chanspy application. Even if there are no channels that match the chanprefix pattern the chanspy application is not exited. Hitting the * key stops spying on a channel but then starts spying on the same

With app_swift 1.6.2 + asterisk 1.6.1.12, I've found that if you enter DTMF during cepstral playback, the first digit of ${SWIFT_DTMF} is [un]set in an odd way. for example consider: 999,1,Swift(some long message that you dont want to wait for|5000|5) 999,n,NoOp(DTMF: ${SWIFT_DTMF}) if while I am listening to the playback, i interrupt and dial: - "12345", SWIFT_DTMF is set to