Displaying 3 results from an estimated 3 matches for "frame_len".
Did you mean:
fname_len
2006 May 11
0
Echo Canceller Memory Usage, Frame Size
...hich is a harder problem (but line echo should work
as well)."
Could you elaborate a bit on the effect of changing the frame size, other
than memory usage? In the small test case I have been using, there is a
20ms delay between the speaker and microphone signals. Test-echo.c has
defaults frame_len=128, filter_len=1024. I ran this case, and also
frame_len=80, filter_len=320 (10 and 40ms at 8000 Hz). The second case
attenuated the echo better, probably because the first filter length is much
longer than the echo path delay. How low a frame length would you recommend
for 8000Hz sample ra...
2006 May 08
5
Speex echo canceller on TI C55 DSP
Hi Jim,
I've just been made aware of these problems (look for the thread "speex
echo cancellation limitations"). It's on my short-term TODO list.
> If fftwrap.c, I ifdefed out the spx_fft_float and spx_ifft_float routines,
> because there were not used and required smallft.c (which is not so small at
> all) to be added to the build.
Right, need to cleanup that
2008 Dec 30
5
Xorcom BRI state NOTOPEN
Hello,
I recently got a problem I have never seen during my previous
installations.
I have a Xorcom device with 4 BRI and 8 FXS ports. I use ubuntu Linux
and asterisk 1.4.22. Everything works fine but after some time zap
channels disappear in asterisk.
root at pbx1:~# cat /proc/zaptel/*
Span 1: XBUS-00/XPD-00 "Xorcom XPD #00/00: BRI_TE" AMI/CCS NOTOPEN
1 XPP_BRI_TE/00/00/0 Clear