search for: forwading

Dear all I have recently install TE120P Digium E1 card now everything is fine and working i have connect my asterisk with avaya but when anybody transfer call from avaya i got this error on my asterisk consol [Aug 27 14:46:50] WARNING[19527]: app_dial.c:741 wait_for_answer: Unable to forward voice or dtmf -- Hungup 'Zap/32-1' I m waiting for your reply Satish Patel

Hi, I am currently running Samba 4.0.9 as a DC. My AD domain and Kerberos realm is "domain.com". Although this was not considered when we set up the domain, now we need "foo.domain.com" to be resolved externally by our ISP DNS server. I tried to configure BIND as a backend and to manuallly add a zone " foo.domain.com", type forward, but it does not work (Samba DLZ

...|Linksys |----------<PC> When i ping from my PC to the board (when both ixp0 and ixp1 are connected to the switch), everything works fine. In that case ixp1 is in blocking state and ixp0 is in forwarding state. The issue here is when i unplug ixp0 from the switch (the one which is forwading state), ixp1 comes to forwardinmg state after the state changes(listening-learning---forwading), but there is a huge delay of around 15-17 mins till i can ping the board(IXP425) from my PC. i went through the bridging code and put debug messages to see that it comes to forwarding state immedi...

...act as LAN gateway and also as a transparent proxy server but all client "passing through" that server are enable to send or recieve mails. The mail server is host on the same LAN running mdaemon, both servers are on private IP block(192.168.0.0/24). Am using cisco router to do port forwading for mailserver(25,110,143) ports. If i eliminate CentOS box and direct traffic direct to cisco router everything works. My question is why is it when i use CentOS box as LAN gateway clients are unable to send/receive mails? I ave done nating on that box. Centos 5.5 full updated.

Hi, I have 3 Samba servers run Samba 2.0.7 on RH6.2, with Kernel 2.2.16-3. Everything seems to be OK, except that my Win9x clients cannot see other Win9x clients across the subnets. Each server has 2 n/w cards installed, with IP Forwading enabled etc. If the user knows the machine name, he can get access to the shared resources across all 3 subnets, but using the n/w neighbourhood browser, shows only those users on the same subnet. The Win9x clients are all set to point to the same primary WINS server, and the secondary WINS server...

Hello, I run a dovecot proxy (which is doing authentification itself) and a dovecot backend on separate boxes. I want to change the actual password scheme. Since postlogin scripting is not supported by proxies and %w variable is not forwaded to dovecot backend is there any way that I can update the password scheme with my current setup ? Thanks in advance.

...---------------------------------------------------------- Status|NEW |RESOLVED Resolution| |FIXED ------- Additional Comments From djm at mindrot.org 2002-09-12 16:29 ------- Recent versions (using privsep) establish port-forwadings as the owner of the connection. In any case, this is not a "severe security flaw" unless you are misguided enough to use identd for authentication. ------- You are receiving this mail because: ------- You are the assignee for the bug, or are watching the assignee.

Hello everybody! I am having the following problem and since I am a beginner in playing with asterisk, i can't solve it: I am trying to integrate my existing H.323 network in real world telephony by ISDN cards. The problem is that i DON'T want to change all e164 numbers in my h.323 network and my ISDN provider doesn't accept those identities (CIDs). So, i have to spoof the outgoing

Hi, i have two asterisk@hotme 2.2 server. i want if one of my asterisk server down. other is taken control of my first server and call goes through. Is it possible in asterisk. Usman -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20051216/7b0c169d/attachment.htm

I'm forwading your request to the wine-users mailing list. Someone there can help you. On Sun, 2001-10-28 at 14:11, Christos Michail wrote: > Helo from Athens Greece > > I got and compile wine on a suse 7.1 Linux (running Kernel 2.4) > The compilation and installation went straight forwrd without a...

----- Forwarded message from Steven Rubenstein <SJR@ElectricSpectric.com> ----- yes the apps matters because some other users might have run into the same problem. Have you check the app database on the codeweavers website ? I never try that app myself so I forwaded the answer to the mailing list ... I'll do a little research on it ;) See you Rico > From: Steven Rubenstein

I retired from AT&T on July 1, 2003. Your message was forwaded automatically to ``ark at acm dot org'' (after replacing "at" by "@" and "dot" by ".", a circumlocution intended to forestall mail harvesting). Please use this address for future email to me. Regards, Andrew Koenig

Hello all Sorry to post this hugely off-topic, but i have no clue where to start. We are looking to replace an Exchange server with something with less licencing issues, is there a way to use windbind (or winbind-ish behaviour) for an email server (ie users authenticate through winbind to log on to imap server etc). Once again, sorry for the mispost, even a push in the right direction will

...llocate the same ports as above. For ports used by bricks (49152 and higher) I found in /etc/glusterfs/glusterd.vol: option base-port 49152 But I do not see in manpage and help info of glusterd/glusterfsd/glusterfs options to change 24007 and 24008 ports. Is there a known way to do it or is port forwading my only option? Thanks! BR, Rafal. -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.gluster.org/pipermail/gluster-users/attachments/20170628/aeb9a286/attachment.html>

...llocate the same ports as above. For ports used by bricks (49152 and higher) I found in /etc/glusterfs/glusterd.vol: option base-port 49152 But I do not see in manpage and help info of glusterd/glusterfsd/glusterfs options to change 24007 and 24008 ports. Is there a known way to do it or is port forwading my only option? They are not configurable. I also don't see how port forwarding would help you. What works is giving a different IP to each container and that allows all glusterd processes to bind on 24007. Thanks! BR, Rafal. _______________________________________________ Gluster-users...

...100: eth1: e100_watchdog: link up, 100Mbps, full-duplex br0: port2(eth1) entering learning state br0: topology change detected, propogating br0: port2(eth1) entering forwarding state All that looks fine for eth1. But after eth0 enters promiscuous mode, it never enters a learning state, and never a forwading state. What I've tried so far: * echo "1" > /proc/sys/net/ipv4/ip_forward * Checked for IRQ conflicts w/ the NICs. * Moved NICs to different PCI slots * switched cable so network side is in eth0, local side on eth1. Same results as above but reversed, i.e. eth1 then has the proble...

Hi, I have an DNAT ISSUE with PREROUTING. This is my setup. I have 2 firewalls running iptables. Pls asume 1.2.3.4/29 is the internet interace of FIRST firewall. 2.3.4.5/29 is the internet interface of SECOND firewall. it has DMZ zone. in that DMZ zone, mail server runnig @ 192.168.100.3 Now I want to DNAT port 25 of FISRT firewall ( i.e - its ip address - 1.2.3.4/29) to the internet ip

...raries that support multiple mechanisms (bz #1220) - Improve documentation for ssh-add(1)'s -d option (bz #1224) - Rearrange and tidy GSSAPI code, removing server-only code being linked into the client. (bz #1225) - Delay execution of ssh(1)'s LocalCommand until after all forwadings have been established. (bz #1232) - In scp(1), do not truncate non-regular files (bz #1236) - Improve exit message from ControlMaster clients. (bz #1262) - Prevent sftp-server(8) from reading until it runs out of buffer space, whereupon it would exit with a fatal error. (bz #128...

...raries that support multiple mechanisms (bz #1220) - Improve documentation for ssh-add(1)'s -d option (bz #1224) - Rearrange and tidy GSSAPI code, removing server-only code being linked into the client. (bz #1225) - Delay execution of ssh(1)'s LocalCommand until after all forwadings have been established. (bz #1232) - In scp(1), do not truncate non-regular files (bz #1236) - Improve exit message from ControlMaster clients. (bz #1262) - Prevent sftp-server(8) from reading until it runs out of buffer space, whereupon it would exit with a fatal error. (bz #128...

Hi!, I have Fedora 2 installed (Kernel 2.6), 3 interfaces (eth0,eth1,eth2), in the eth1 i have my local network and eth0 the Internet conection, when i do masquerading (eth1 out by eth0) only works for a few minutes. I dont know what i?m doing wrong, or only is an incompability or error between the OS Fedora 2 and the shorewall 2.0.7...i restart the shorewall service ones works anothers doesnt.