search for: fonti

Hello Bernd, I think you might wanna known this. Cheers Geert Stappers ----- Forwarded message from postmaster at fontys.nl ----- From: postmaster at fontys.nl To: stappers at stappers.nl Subject: Delivery Status Notification (Failure) Date: Sun, 13 Mar 2005 23:56:03 +0100 This is an automatically generated Delivery Status Notification. Delivery to the following recipients failed.

perhaps the boot-from-cdrom code in Smart Boot Manager? Bernd >>> No, since booting from CD-ROM requires that the El Torito part of the BIOS is activated, which it won't be if it didn't boot from CD-ROM in the first place. ---------------------------------------------------------------- Op deze e-mail zijn de volgende voorwaarden van toepassing:

Okay, spending the time to dot t's and cross i's (or something like that), I think I have something now that can be called 3.00-worthy, so let's call it a release candidate. Changes over the earlier 3.00 prereleases: - -m and -a options now supported by the DOS installer. - PXELINUX now allows IP addresses, FQDNs, and truncated hostnames when specifying an alternate TFTP server

Hello, Can I load setupldr.bin directly using isolinux without original CD boot sector? Thanks, Theewara

I have a Lilo.conf file, which I have tried for many hours to convert to Syslinux. I looked around on the web for references on translating some of the components. I want to convert it to Syslinux/Isolinux. Any suggestions would be greatly appreciated. When I tried to convert it I made sure that the kernel and initrd had proper DOS names and such. -Michael =:LILO.CONF:= prompt timeout=10

...there a way to use an arbitrary postscript font and position it into a ps or pdf graphic (i.e., without it being in the family {5 fonts} that I am using for the main drawing)? in a weird latex/R mix, my intent is something like pdf(file="test.pdf"); plot( c(0,1),c(0,1) ); test.font = fontis("postscriptfont.pfb"); # may need a tfm specification, too? text( 0.5, 0.5, fontobject("some text", test.font)); dev.off(); help would be highly appreciated, as always. sincerely, /ivo welch

HPA, a longterm reminder. See below. Can you also make a LABEL ignore other labels if no KERNEL statement is found in between? That way you could define multiple aliasses for an entry. label foo label bar label memtest kernel memtestp foo ignores 'label bar' , 'label memtest' and executes 'kernel memtest' bar ignores 'label memtest' and executes 'kernel

I'd like to take advantage of the small, compressed Linux systems such as Knoppix or BeatrIX, but I can't have a CD rom on my system. (A project's marketing requirement.). So I figure I could use something like SYSLINUX or ISOLINUX to do it for me, but there is some magic in the process (the sequence of booting) that eludes me. 1/ mbr (from SYSLINUX) installed on hard drive... and

Does SYSLINUX have any idea which DOS driveletter would be assigned to the disk it is booting from? At www.veder.com someone is trying to build a USB flash drive. However, FreeDOS does not seem to boot correctly from it (bootsector trouble maybe, or kernel itself is confusing drives), thus we're thinking of using Syslinux + Memdisk + bootimage, but somehow we want to be able to also access the

isolinux: Extremely broken BIOS detected Yoper 2.1 --------- ISOLINUX 2.11 2004-08-16 isolinux: Loading spec packet failed, trying to wing it... isolinux: Extremely broken BIOS detected, last ditch attempt with drive = 9F isolinux: Disk error 01, AX = 4209, drive 9F Boot failed: press a key to retry... Helix 1.5 --------- ISOLINUX 2.04 (Debian, 2003-06-06) isolinux: Loading spec packet failed,

Tried MSDOS7.0(win95osr2) only not freedos. Why hard disk images may fail with msdos ? De"Blaauw,Bernd B." B.Blaauw at student.fontys.nl A "fabrice.maraval" fabrice.maraval at laposte.net Copies syslinux at zytor.com Date Thu, 18 Mar 2004 22:59:53 +0100 Objet RE: [syslinux] (no subject) > What operating system on the Bochs harddisk images? > > FreeDOS seems

Hi All, I was testing syslinux floppy on a Mazza MotherBoard, his chipset is VIA MVP3 (VT82C598MVP, VT82C586B), and Winbond W83877F/TF. After reading the floppy, I see 'boot failed', I have to ide disk in the system, only flash device. I used the -s option to build the floppy. Does Somebody know if the chipset is supported? I tested the floppy on toshiba laptop and it works very fine.

I have been asked to build a Linux Installation lab. The lab has to support the installation of SUSE Enterprise 8, Red Hat (Industrial strength), Fedora, Debian and Mandrake and probably a couple of others. Here is the catch: 1. The machine(s) will only have a virtual floppy attached so installation will be via network (we?ll supply the mirror). 2. It must be completely automatic ? one floppy

hi there, hope this is not too much out of topic here... i give it a try anyway :-) when i try to build the iso with: mkisofs i get the following error: [...] Using TTYX2000.;1 for ./dev/ttyX2 (ttyx2) Using TTYS0000.;1 for ./dev/ttys0 (ttyS0) Using TTYY3000.;1 for ./dev/ttyY3 (ttyy3) Using FD0H360000.;1 for ./dev/fd0H360 (fd0h360) Using TTYX1000.;1 for ./dev/ttyx1 (ttyX1) Size of boot

Hi, I am trying for quite some time to create a bootable hd disk image with mkdiskimage (included in the syslinux distribution) and the combination isolinux/memdisk. It just won't work:-} I have done the following: [snip] # ./mkdiskimage -d -o disk 256 32 1 640 # losetup -o 640 /dev/loop3 disk # mount /dev/loop3 /mnt/3 # mount | grep loop3 /dev/loop3 on /mnt/3 type vfat (rw) :: copy

HPA, is it possible to add a parameter/argument to syslinux.com/syslinux.exe to specify a file? currently it's something like SYSLINUX A: I'd like the following also to be possible: SYSLINUX A: A:\SYSLINUX.BIN It still copies LDLINUX.BIN to A:, but writes the generated bootsector intended for drive A: to a 512byte user-specified file Perhaps to allow both at the same time even SYSLINUX

Hello! I'm trying to boot with a remastered Knoppix 3.4 CD. I burned it with debugging and I get the following output: isolinux: Starting up, DL = 9F isolinux: Loaded spec packet OK, drive = 9F isolinux: Loading main image from LBA = DEADBEF0 isolinux: Sectors to load = D5B7 isolinux: Disk error BE, AX = 42F0, drive 9F A don't understand everything in it and I can't find enough

Hi! H. Peter Anvin, Could memdisk be made readonly? Thanks a lot! Anticipating your reply. _______________________________ Do you Yahoo!? Declare Yourself - Register online to vote today! http://vote.yahoo.com

Hi all, I'm trying to work out how to boot DOS on a diskless PC, and I've come to a bit of a stumbling block with loading IPX support (which is extremely important, since most DOS games use IPX for network play ;-)) So far thanks to PXELinux and Memdisk I've gotten a DOS floppy image booting successfully, but I'm stuck trying to get IPX support. Admittedly I don't have much

I have an application/program which shows 'bios EDD error' when using Isolinux (with either loading an image directly through MEMDISK, or booting to A:), and not when using a bootdisk directly or booting a bootdisk directly which has SYSLINUX on it. configuration: bootable cdrom with Isolinux 2.11/2.12pre9 as bootloader. 1.44MB bootdisk with MSDOS.SYS/IO.SYS and the UDMA2 dos driver,