search for: flapping

Hey all, I'm running * (1.0.9) with some 7960's. When I pick up the handset it often will flap on and off hook eventually hanging up on me and not realizing that I am still holding the handset. These phones are running with the SIP 7.5.0 image on a LAN (no NAT). I am not sure if this is a phone issue or an Asterisk setting. Ideas?

Hi *, I'm running into a problem configuring bonding on an HP DL 360 G4p, running 4.3 + tg3 driver version 3.43f. I'm connecting eth0 and eth1 to a Cisco 2948 (CatOS 8.1(3)) and receiving flapping notices. The ethernet address is that of the primary interface. I have tried several different modes, including balance-rr (0), active-backup (1), and balance-alb (6). All have the same problem. More detailed info follows. 2.6.9-34.ELsmp #1 SMP Wed Mar 8 00:27:03 CST 2006 i686 i686 i38...

...administrative user. We need to decide if the change in owner is enough reason to refuse the open(), or if we should just continue. On the basis that the owner change is not significant, we reworked the code to do the lstat() after the fstat(), and not compare the owner. Another way to avoid the flapping would be to run this test as someone other than Administrator. Douglas and Andrew

...to decide if the change in owner is enough reason to refuse > the open(), or if we should just continue. > > On the basis that the owner change is not significant, we reworked the > code to do the lstat() after the fstat(), and not compare the owner. > > Another way to avoid the flapping would be to run this test as someone > other than Administrator. > > Douglas and Andrew > From 8ce86de0e1d37f5436e5ae0def4025a58d92bebf Mon Sep 17 00:00:00 2001 > From: Andrew Bartlett <abartlet at samba.org> > Date: Wed, 9 Mar 2016 15:55:44 +1300 > Subject: [PATCH] smb...

Whilst tinkering with lvm (which now works great - thanks!), I made a typo which caused the domain to stop booting. I think it was just that I got the config file wrong in terms of which device mapped to which. Anyway, I had specified ''restart=True'' and so the domain was starting to boot, failing, then restarting again. This was the expected behaviour, but it was a pain to kill.

Hi, all - I've searched the archives, and although I've come close to finding a few things that describe my problem, I haven't been able to nail it down. Basically I've got 8 TrippLite SU3000RTXR3U's (Couldn't it be a simple model number, like "4UPS"? hah!), and when I tap in to them with nutc, I see that the status flaps back and forth between OL and OB quite

Hi, final<-data.frame() ?? for (m1 in 4:10) { ?????? for (n1 in 4:10){? ?????????? for (x1 in 0: m1) { ????????????? for (y1 in 0: n1) { final<- rbind(final,c(m1,n1,x1,y1)) res}}}} ?final1<-within(final,{flag<-ifelse(x1/m1>y1/n1, 1,0)}) ?head(final1) #? m1 n1 x1 y1 flag #1? 4? 4? 0? 0??? 0 #2? 4? 4? 0? 1??? 0 #3? 4? 4? 0? 2??? 0 #4? 4? 4? 0? 3??? 0 #5? 4? 4? 0? 4??? 0 #6? 4? 4?

Hi all, I've got a device that seems to become unreachable for about 2 minutes, every hour. From what I can tell, it isn't due to network or server issues. Any ideas? TIA. -- Mike Diehl Diehlnet Communications, LLC. Voice: (505) 903-5700 Fax: (505) 903-5701

On Wed, Mar 09, 2016 at 04:11:05PM +1300, Douglas Bagnall wrote: > We looked at this some more, and Andrew seemed to understand and wrote > the attached patch. > > We need to decide if the change in owner is enough reason to refuse > the open(), or if we should just continue. > > On the basis that the owner change is not significant, we reworked the > code to do the

I had an odd situation yesterday, klibc 1.5.17 ipconfig was trying DHCP on all 3 NICs in the server, but one has a bad switch that causes the link on eth2 to go up/down every 10 seconds. IPconfig would just time out. If I tell ipconfig to only try eth0, then DHCP address is configured, and the netboot proceeds 100%. I'll take a peek at the code but maybe someone here is familiar with the

2009/5/16 Arnaud Quette <aquette.dev at gmail.com> > > > 2009/5/7 Daniel O'Connor <doconnor at gsoft.com.au> > >> On Wed, 6 May 2009, Arnaud Quette wrote: >> > I think I've found something, but I would need an upsd debug output >> > (level 3) to see what going on the state socket. >> >> I've attached a log for you. >>

...ower. ?? * BUG 15306: Floating point exception (FPE) via cli_pull_send at ???? source3/libsmb/clireadwrite.c. o? Andrew Bartlett <abartlet at samba.org> ?? * BUG 15328: test_tstream_more_tcp_user_timeout_spin fails intermittently on ???? Rackspace GitLab runners. ?? * BUG 15329: Reduce flapping of ridalloc test. ?? * BUG 15351: large_ldap test is unreliable. o? Ralph Boehme <slow at samba.org> ?? * BUG 15143: New filename parser doesn't check veto files smb.conf parameter. ?? * BUG 15354: mdssvc may crash when initializing. o? Volker Lendecke <vl at samba.org> ?? *...

...ower. ?? * BUG 15306: Floating point exception (FPE) via cli_pull_send at ???? source3/libsmb/clireadwrite.c. o? Andrew Bartlett <abartlet at samba.org> ?? * BUG 15328: test_tstream_more_tcp_user_timeout_spin fails intermittently on ???? Rackspace GitLab runners. ?? * BUG 15329: Reduce flapping of ridalloc test. ?? * BUG 15351: large_ldap test is unreliable. o? Ralph Boehme <slow at samba.org> ?? * BUG 15143: New filename parser doesn't check veto files smb.conf parameter. ?? * BUG 15354: mdssvc may crash when initializing. o? Volker Lendecke <vl at samba.org> ?? *...

Hi, I have had a long standing problem with NUT talking to 110V MGE UPSs on FreeBSD, I was recently investigating again and noticed that upsd seems overly noisy, eg.. May 5 03:50:36 egbert upsd[96662]: UPS [ups1] data is no longer stale May 5 03:50:36 egbert upsd[96662]: Data for UPS [ups1] is stale - check driver May 5 03:50:36 egbert upsd[96662]: UPS [ups1] data is no longer stale May 5

I have a small number of boxes in different locations, and currently have a fairly crude cron job running on each, which does a ping of one or more of the other boxes, and if the ping fails, it emails me to say the other box might be down. It then emails me again the next time the other box appears to be up. Of course, this can't distinguish between the remote box really being down and there

...All, My site has two separate clustered Samba instances (managed by two independent CTDB instances) running over GPFS. In the last couple of weeks, we have seen a recurring issue that causes the `smbd` process in *one* of these instances to become unresponsive (as seen by CTDB), which results in flapping of CTDB and multiple IP takeover runs. The symptoms that we observe are: 1) Samba becomes unresponsive 2) The output of `smbstatus` starts to show "-1" for each connection where it should be showing user/group information. 3) Samba starts terminating connected sessions and CTDB...

I''m testing an Iscsi multipath configuration on a T2000 with two disk devices provided by a Netapp filer. Both the T2000 and the Netapp have two ethernet interfaces for Iscsi, going to separate switches on separate private networks. The scsi_vhci devices look like this in `format'': 1. c4t60A98000433469764E4A413571444B63d0 <NETAPP-LUN-0.2-50.00GB>

...ag messages. >> > > I've asked Daniel Dunbar to increase the timeout on this machine. Every > build which requires libLTO to be rebuilt will fail, but because it's doing > an incremental build the later builds may succeed so long as libLTO doesn't > change. It's flapping pretty nastily because of that. > > So Daniel, please take this as a reminder to *really* increase the timeout > instead of just filing it away into your todo list :) Sure, sure, blame me not all the people making LLVM fatter (err, maybe that is also me)! :) Timeout upped to 30m, let me...

...r protocols over a large SAN and have had some pain related to a bit of a design flaw: we store CTDB and protocol-specific accounting files (recovery locks, state files, etc) on the same filesystem that we're offering through CTDB itself. This makes our front-end services pretty intolerant of flapping in the back-end filesystem, which is obviously not desirable. We're planning a redesign for this and were wondering what other people in similar environments are doing with the their CTDB shared files. Specifically, I'm referring to the locations supplied for <shared_dir> in these...

Hi there, we're facing some flapping traffic when rsyncing atm 70T from one server to an DELL Isilon. Both systems are connected with 10G Fiber (not Channel). So we started with one simple "rsync -a /src /dest" to the DELL by using NFS3. So it runs with around 3Gbit for some seconds, than it were 30Kbit for also some seconds...