search for: firwalls

Hi Guys luv your product but ive become stuck since updating to Suse Linux Enterprise 9, Id luv some advice on where i should be looking to resolve this issue.. basically... when shorewall is off all ports are showing to the internet ''25,80,443,ect'' and i can ping my box from an external source. ''with stopped rule created to allow ppp0'' when shorewall is on

How important is it to certify the firewall?

...have a Polycom IP300 on the remote side configured with a static IP address. When I call the phone on the remote side, it rings and establishes the call fine. The problem I am having is that the remote side can hear the call find but the local side hears nothing. Because of the VPN there are no firwalls in the way. Does anyone have some ideas or atleast how I can track down the problem. Thanks, Pete

Hi I install shorewall and every seed ok but when I start firwall I got the = followings .......... /sbin/shorewall: line 521: --: command not found .......... .......... Regards, John Fong

I have an Asterisk PBX on the private lan, which is protected from the public Internet with a Linux iptables machine. The firwall is it's own seperate box running NAT with SPI. I want to drop a SIP phone at my brothers house, and have it be an extension off my Asterisk box. I've been looking around at some FAQ info on forwarding ports, and also looked at siproxd. Anyway, I'm

hi I just joined this list, as I am having really strange issue and so far been unable to find the root cause.I will give you scenario to see if anyone knows what could be the cause: 1: 2 windows 64bit enterprise server serverA and Server B 2: both on same physical network no firwalls not routers 3: both on same domain controller ( windows NT4) I can connect to serverA as under from a linux host smbclient //serverA/d$ -U administrator password:********** smb:> but I can't connect to serverB from the same linux host with following smbclient //serverA/d$ -U administr...

I have three ethernet card and two of them connected to diffrent ISP and has diffrent gateways. And one ethernet card is connected to local lan. I have installed iptables and configured the firwall to work as nat gateway for the users. Now I want to route only mail traffic to the perticular ISP and which I am not able to do it. I have done iproute configuration what ever lartc said. But still I

I don't have a CCO account with cisco and I want to use asterisk for my cisco 7960 phones But I could not get myself a firmware image for it. If anyone can share a copy of it, would be most appreciated Or if you could point me to where I can download it Thank you ,jm -------------- next part -------------- An HTML attachment was scrubbed... URL:

Our Client software used samba protocol,If there is no firewall case , this protocol work properly from remote site.All of firwall configuration open ( this mean is all of port open ). Samba work very well, but if some constrain put in, it doesn't work. 1)I would like to know about port usage of samba protocol. I think snmpd, nmpd daemon used some port number. i can see /etc/service file.

Hi, i want to disable the nwfilter functionality of libvirt. It's surely nice for some people, nevertheless i don't want libvirt to alter any netfilter rules, neither i want the according functionality even available. I know about nwfilter-undefine, but what i'm looking for is an option to globally disable this functionality at all. Some config flag or similar. How can i achieve

I will try a newer version. On 24 November 2014 at 11:30, Michal Privoznik <mprivozn@redhat.com> wrote: > On 24.11.2014 11:23, Dhia Abbassi wrote: > >> Thanks for your answer, >> >> 1) In this case i'm not using shared storage, the migration is happening >> between two non-shared storage with full disk copy >> 2) I already created the file with same

Hi Stef and Alexey I have read some documents about CBQ algorithm from http://www.icir.org/floyd/cbq.html but still have some question about CBQ in Linux . 1. First estimator can estimate how much bandwidth already USED per class. one estimating algorithm is EWMA (exponential weighted moving average), how about Linux implemenatation about estimator? also do you have link for this algorithm? I

Hi, I don't explain very well what my problem, but i can't make calls. i analise my log full and i found two errors Jul 3 19:02:08 ERROR[4670] res_config_mysql.c: MySQL RealTime: Failed to connect database server on (err 2002). Check debug for more info. Jul 3 19:02:08 VERBOSE[4670] logger.c: -- Added extension 'exit-FAILED' priority 1 to macro-vm Jul 3 19:02:08

Hi all, I need to move e-mail files of my users from one file system to another. I use a MySQL backend on Dovecot 2.1. How can I do to disable temporary an account while moving files ? I have an "active" bit in my DB, but if I set it to 0, my MX servers are bouncing mails. How can I do to disable temporary an account ? In fact, I need dovecot not to do any change on files... I

I tired to install newer version of qemu-kvm (2.1.0-2.9-x86_64) through rpms but the following rpms are not all available - qemu-2.1.0-2.9-x86_64.rpm - qemu-kvm-2.1.0-2.9-x86_64.rpm - qemu-common-2.1.0-2.9-x86_64.rpm - qemu-kvm-tools-2.1.0-2.9-x86_64.rpm - qemu-debuginfo-2.1.0-2.9-x86_64.rpm - qemu-system-x86-2.1.0-2.9-x86_64.rpm - qemu-guest-agent-2.1.0-2.9-x86_64.rpm -

[Please keep the list CC-ed as it may help somebody from future when searching for solution to the same problem] On 5/6/19 6:08 PM, nakata@geekpit.org wrote: > Am 2019-05-06 16:26, schrieb Michal Privoznik: >> On 5/6/19 3:44 PM, nakata@geekpit.org wrote: >>> Hi, >>> >>> i want to disable the nwfilter functionality of libvirt. >>> It's surely nice

Hi, I was woredering if you could help me to put into practice this solution. The idea: Create a IVR-Voicemail The scene: PSTN------/6------PBX--------/12--------- Internos | /4 ports | IVR-Voicemail The Operation: 1)Where a call enters from the PSTN, the PBX

I'm still unable to get my SPA-1001 to work behind NAT with an Asterisk box out on the Internet. It works fine to my local A@H box. I've tried... many things. I'm willing to pay a $250 bounty (PayPal preferred) to anyone who can help me get it working. Any Sipura experts out there? Eric.

Package: xen-utils-common Version: 4.0.0-1 Hello guys, Ik running Debian stable (squeeze). I run a virtual pfsense firwall in a DomU. I created multiple bridges. The interfaces itself (except eth2 (connected to br_lan)) itself don't have a IP assigned. I use them to connect to other devices. grep my-network /etc/xen/xend-config.sxp (network-script my-network-script) root at

Hi everyone , i have a few questions/problems with tinc , which i need to address ASAP , so i'll make it brief . i have 33 sites , connected with each other using wan , in each site , there are two linux firewalls + 3-4 more servers , i preferred to have a full mesh within my network , but unfortunately it was not possible , when i wanted every site to be connected to every other , as the