search for: firmar

When a USBstiked-syslinux starts, it's the PC's firmare that's reading the USB ?. But once the USBsyslinux takes over, has IT also got a USB driver? So that USBsyslinux can install a different USBstik/partition? Ie. boot with stikA to install & run stikB:partition5 ? ------------ Is the following sound logic? > Do zero out the partition tab...

I can't get my 7960 to upgrade to 7.2 or infact downgrade to 6.3 either. when I change image_version to the 7.2 string in sipdefault.cnf it reboots but does not look for any image files it just looks for the same files as it normally does. Any ideas? it seems as though I have locked the firmare. Chris

I have not seen anybody on the web to have found this so I thought I would check here. Anybody got this firmware? I've found firmware for the 400, but it doesn't seem to load in the 410.

...aw. >> >> Has anyone experienced similar issues with this configuration, and if >> so, does anyone have tips on how to resolve the issues? >> > > > Kevin, > > Please try the 4.9.11-22 kernel that I just released for CentOS-6 (along > with the newer linux-firmare packages and xfsprogs). > > If you enable the xen-testing repository in your CentOS-Xen.repo file > (assuming it is pointing to xen-44 and not xen-46) then a 'yum upgrade' > should replace all the needed packages. > > The actual path is here for the packages: > >...

...in Stange wrote: > On 02/21/2017 11:50 AM, Johnny Hughes wrote: >> On 02/21/2017 11:47 AM, Johnny Hughes wrote: >>> >>> >>> Kevin, >>> >>> Please try the 4.9.11-22 kernel that I just released for CentOS-6 (along >>> with the newer linux-firmare packages and xfsprogs). >>> >>> If you enable the xen-testing repository in your CentOS-Xen.repo file >>> (assuming it is pointing to xen-44 and not xen-46) then a 'yum upgrade' >>> should replace all the needed packages. >>> >>> The ac...

I have upgraded the GXP-2000 to the newest firmware 1.0.1.12<http://1.0.1.12>and the phone is much more usable However, I still have two slight sound quality issues: 1) There is static on the line at all times. It is not that noticable to me, but when I make calls out the PSTN the person on the other end hears it. If I use a Cisco ATA with an analog phone and call the same person again

On Fri, Jun 07, 2024 at 09:11:32PM +0900, FUJITA Tomonori wrote: > Hi, > > On Fri, 31 May 2024 11:59:47 +0200 > Danilo Krummrich <dakr at redhat.com> wrote: > > > Once we get to a conclusion I can send a series with only the device and firmare > > abstractions such that we can get them in outside of the scope of the reset of > > both series to get your driver going. > > Since your discussion with Greg seems to continue for a while, let me > include the following patch that Greg approved with the next version > o...

On 02/21/2017 11:50 AM, Johnny Hughes wrote: > On 02/21/2017 11:47 AM, Johnny Hughes wrote: >> >> >> Kevin, >> >> Please try the 4.9.11-22 kernel that I just released for CentOS-6 (along >> with the newer linux-firmare packages and xfsprogs). >> >> If you enable the xen-testing repository in your CentOS-Xen.repo file >> (assuming it is pointing to xen-44 and not xen-46) then a 'yum upgrade' >> should replace all the needed packages. >> >> The actual path is here for th...

...21/2017 11:50 AM, Johnny Hughes wrote: >>> On 02/21/2017 11:47 AM, Johnny Hughes wrote: >>>> >>>> >>>> Kevin, >>>> >>>> Please try the 4.9.11-22 kernel that I just released for CentOS-6 (along >>>> with the newer linux-firmare packages and xfsprogs). >>>> >>>> If you enable the xen-testing repository in your CentOS-Xen.repo file >>>> (assuming it is pointing to xen-44 and not xen-46) then a 'yum upgrade' >>>> should replace all the needed packages. >>>>...

...che tutto quanto ricevuto sarà esclusivamente impiegato per le nostre ricerche. Siamo naturalmente molto grati a tutti coloro che anche quest'anno hanno deciso di rinnovare ancora la fiducia nel nostro lavoro con la destinazione del loro 5 per mille. A coloro che stanno per farlo ricordiamo di firmare ed indicare il nostro codice fiscale 03254210150 nel riquadro "Finanziamento agli enti della ricerca scientifica e dell'università. Per maggiori informazioni: IRCCS - Istituto di Ricerche Farmacologiche Mario Negri, Via La Masa 19 - 20156 Milano Tel: +39 02 39...

Hello Friends, This is my first post on CentOS mailing list. I am using CentOS since last 3 years and using Linux since 2003. I am Java Based ERP(http://ofbiz.apache.org/) developer and I truly appreciate the stability of CentOS as the Desktop machine for the developers. In the early 2003 I was using CentOS 4 then I moved to CentOS 5 stable release then before 1.5 month I installed CentOS 5.2

Back in January I started having a problem with my Sipura (and there was at least one other on the list with the same problem) that if I answer an incoming call (via X100P) on line 1 of my Sipura, the caller cannot hear any voice from the internal extension. If the internal user puts the external user on hold (via flash hook) and returns, both directions of audio are fine. Line 2 never has

When a USBstiked-syslinux starts, it's the PC's firmare that's reading the USB ? But once the USBsyslinux takes over, has IT also got a USB driver? Since my MotherBoard & 2009 Slackware built USBstik syslinux booter were stolen I bought a <WinTel> laptop and USBextender to access my old IDE & SATA disks. With WinTel's new arrang...

...>>>>> > >>>>> I think I've figured this out. It's to do with how my system is configured. I do have an initrd, but the only thing on > >>>>> it is the cpu microcode which, it is recommended, should be loaded early. The absence of the NVidia firmare from an > >>>>> initrd doesn't matter because the drivers for the hardware that need to load firmware are all built as modules, So, by > >>>>> the time the devices are configured via udev, the root partition is mounted and the drivers can get at the firmware...

..., or > else it's a hardware design flaw. > > Has anyone experienced similar issues with this configuration, and if > so, does anyone have tips on how to resolve the issues? > Kevin, Please try the 4.9.11-22 kernel that I just released for CentOS-6 (along with the newer linux-firmare packages and xfsprogs). If you enable the xen-testing repository in your CentOS-Xen.repo file (assuming it is pointing to xen-44 and not xen-46) then a 'yum upgrade' should replace all the needed packages. The actual path is here for the packages: https://buildlogs.centos.org/centos/6/v...

On Fri, Jun 07, 2024 at 09:11:32PM +0900, FUJITA Tomonori wrote: > Hi, > > On Fri, 31 May 2024 11:59:47 +0200 > Danilo Krummrich <dakr at redhat.com> wrote: > > > Once we get to a conclusion I can send a series with only the device and firmare > > abstractions such that we can get them in outside of the scope of the reset of > > both series to get your driver going. > > Since your discussion with Greg seems to continue for a while, let me > include the following patch that Greg approved with the next version > o...

...; >>>>>>>> I think I've figured this out. It's to do with how my system is configured. I do have an initrd, but the only thing on > >>>>>>>> it is the cpu microcode which, it is recommended, should be loaded early. The absence of the NVidia firmare from an > >>>>>>>> initrd doesn't matter because the drivers for the hardware that need to load firmware are all built as modules, So, by > >>>>>>>> the time the devices are configured via udev, the root partition is mounted and the drivers...

...out why it hangs, that would be very helpful... > > > > I think I've figured this out. It's to do with how my system is configured. I do have an initrd, but the only thing on > it is the cpu microcode which, it is recommended, should be loaded early. The absence of the NVidia firmare from an > initrd doesn't matter because the drivers for the hardware that need to load firmware are all built as modules, So, by > the time the devices are configured via udev, the root partition is mounted and the drivers can get at the firmware. > > I've found, by turning on...

...; >>>> > >>> > >>> I think I've figured this out. It's to do with how my system is configured. I do have an initrd, but the only thing on > >>> it is the cpu microcode which, it is recommended, should be loaded early. The absence of the NVidia firmare from an > >>> initrd doesn't matter because the drivers for the hardware that need to load firmware are all built as modules, So, by > >>> the time the devices are configured via udev, the root partition is mounted and the drivers can get at the firmware. > >>&...

P? Thu, 3 Oct 2019 07:38:05 -0500 Valeri Galtsev <galtsev at kicp.uchicago.edu> skrev: > > On Oct 3, 2019, at 6:24 AM, G?nther J. Niederwimmer > > <gjn at gjn.priv.at> wrote: > > > > > > 07:00.0 Serial Attached SCSI controller [0107]: Intel Corporation > > C602 chipset 4-Port SATA Storage Control Unit [8086:1d6b] (rev 06)? > > > > what