search for: ff02

Miredo is run as a server from the command line: /usr/sbin/miredo The man page says the signal SIGTERM stops the server. How do I send SIGTERM to the server? Or SIGHUP, as I want to make a change to the config file. And once I get this as I want it, how do I run it at system boot?

...hrough (at the server side): mauer:/usr/local/var/open3600-spool# tcpdump ip6 -i fvhglobalnet -n tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on fvhglobalnet, link-type EN10MB (Ethernet), capture size 96 bytes 18:55:07.318963 IP6 fe80::c446:8ff:fea2:724c > ff02::2: ICMP6, router solicitation, length 16 18:55:09.288642 IP6 fe80::c446:8ff:fea2:724c > ff02::16: HBH ICMP6, multicast listener report v2, 1 group record(s), length 28 18:55:09.302624 IP6 2001:888:13b3::1.5353 > ff02::fb.5353: 0[|domain] 18:55:10.304354 IP6 2001:888:13b3::1.5353 > ff02::f...

...radio kernel: [ 553.207198] [UFW AUDIT] IN=enp2s5 OUT= MAC= SRC=192.168.254.39 DST=224.0.0.251 LEN=161 TOS=0x00 PREC=0x00 TTL=255 ID=39413 DF PROTO=UDP SPT=5353 DPT=5353 LEN=141 Feb 4 10:04:02 radio kernel: [ 553.992620] [UFW AUDIT] IN= OUT=enp2s5 SRC=fe80:0000:0000:0000:368d:74dd:abec:eba0 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=181 TC=0 HOPLIMIT=255 FLOWLBL=910431 PROTO=UDP SPT=5353 DPT=5353 LEN=141 Feb 4 10:04:02 radio kernel: [ 553.992633] [UFW ALLOW] IN= OUT=enp2s5 SRC=fe80:0000:0000:0000:368d:74dd:abec:eba0 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=181 TC=0 HOPLIMIT=255 F...

...com mydomain.com === DC0 hosts 127.0.0.1 localhost.localdomain localhost ::1 localhost6.localdomain6 localhost6 172.23.93.25 dc0.msi.mydomain.com dc0 # The following lines are desirable for IPv6 capable hosts ::1 localhost ip6-localhost ip6-loopback fe00::0 ip6-localnet ff02::1 ip6-allnodes ff02::2 ip6-allrouters ff02::3 ip6-allhosts === DC1 hosts 127.0.0.1 localhost 172.23.93.25 dc0.msi.mydomain.com dc0 172.23.93.26 dc1.msi.mydomain.com dc1 # The following lines are desirable for IPv6 capable hosts ::1 ip6-localhost ip6-loopback fe00::0 ip6-localnet...

I have 2 Ububtu DCs. One acting as a secondary/failover. At one point the users were replicated from primary to secondary. But now they are not replicating. The output from samba-tool drs showrepl is attached. What else may I provide to aid diagnostics? I know Samba does not replicate sysvol 'yet', so rsync is needed, but that does not seem to contain the users. Thank you,

.../resolv.conf points to the dc as a nameserver > >search mydom.lan >nameserver IP.of.my.dc > >/etc/hosts >127.0.0.1 localhost >xxx.xxx.xxx.xxx fs.mydom.lan fs > ># The following lines are desirable for IPv6 capable hosts >::1 localhost ip6-localhost ip6-loopback >ff02::1 ip6-allnodes >ff02::2 ip6-allrouters Nothing in my opinion. So a new big mistry.. Why does : net rpc rights list accounts -U"MYDOM\Administrator" work with dhcp and a /etc/hosts with only 127.0.0.1 in it. and why does a server with static ip errors net rpc rights list acc...

...Rowland Thanks for your quick reply. /etc/resolv.conf points to the dc as a nameserver search mydom.lan nameserver IP.of.my.dc /etc/hosts 127.0.0.1 localhost xxx.xxx.xxx.xxx fs.mydom.lan fs # The following lines are desirable for IPv6 capable hosts ::1 localhost ip6-localhost ip6-loopback ff02::1 ip6-allnodes ff02::2 ip6-allrouters The IPs are correct Harry

Hallo, as described by CISCO in http://www.cisco.com/web/about/ac123/ac147/archived_issues/ipj_7-2/ipv6_autoconfig.html a router hast to send ICMPv6 messages of type RS to the all-router multicast group: ff02::1 and ff02::2 for stateless autoconfiguration. How can I activate this sending in CentOS? Best regards Helmut -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.centos.org/pipermail/centos/attachments/20110906/5ab6ff78/attachment.html>

....0.0.1 localhost.localdomain localhost > ::1 localhost6.localdomain6 localhost6 > 172.23.93.25 dc0.msi.mydomain.com dc0 > > # The following lines are desirable for IPv6 capable hosts > ::1 localhost ip6-localhost ip6-loopback > fe00::0 ip6-localnet > ff02::1 ip6-allnodes > ff02::2 ip6-allrouters > ff02::3 ip6-allhosts > === > > DC1 hosts > 127.0.0.1 localhost > 172.23.93.25 dc0.msi.mydomain.com dc0 > 172.23.93.26 dc1.msi.mydomain.com dc1 > > # The following lines are desirable for IPv6 capable hosts > :...

...etc/hosts and ask for hints. pre01svdeb01 = member server pre01svbmd01 = a windows server (member) pre01svdeb02 = samba ADS DC, not even listed here (192.168.16.205) -> 127.0.0.1 localhost 127.0.1.1 pre01svdeb01.my.tld pre01svdeb01 ::1 localhost ip6-localhost ip6-loopback ff02::1 ip6-allnodes ff02::2 ip6-allrouters 192.168.16.111 ipfire.my.tld ipfire 192.168.16.203 backup backup.my.tld dc.my.tld dc 192.168.16.226 server-bmd.my.tld server-bmd 192.168.16.230 pre01svbmd01 Step2: understood and fixed something: dc-entry was wrong! krb5.conf points to dc.my.tld ... was...

...> /etc/hosts cat hosts # IP-Address Full-Qualified-Hostname Short-Hostname # 127.0.0.1 localhost 10.1.1.21 DCLINUX.ad.mydomain.br DCLINUX # special IPv6 addresses ::1 localhost ipv6-localhost ipv6-loopback fe00::0 ipv6-localnet ff00::0 ipv6-mcastprefix ff02::1 ipv6-allnodes ff02::2 ipv6-allrouters ff02::3 ipv6-allhosts 10.1.1.21 install > > /etc/resolv.conf > search ad.mydomain.br nameserver 8.8.8.8 nameserver 200.x.x.x nameserver 200.x.x.x > > /etc/krb5.conf > > [libdefaults] default_realm = AD.MYDOMA...

...l machine: > ping -I <eth0> <link-local of server> > must work. > If not > check both side link-local addresses if they are set. > > A quick way to check with "any-body on the segment please reply" is to > on virtual machine > ping6 -I <eth0> ff02::1 > You must see 2 addresses (one is your own link-local and the other is > the address on the server) > > Example in my case is pasted (there are 4 machines): > > $ ping6 -I n1 ff02::1 > PING ff02::1(ff02::1) from fe80::2c3b:53ff:fea0:9d26 n1: 56 data bytes > 64 bytes from...

Hi Rowland Thanks for your reply. I see: $ cat /etc/hosts 127.0.0.1 localhost ::1 localhost ip6-localhost ip6-loopback ff02::1 ip6-allnodes ff02::2 ip6-allrouters 127.0.1.1 RPHS So I guess I should edit the hosts file and specify RPHS's fixed IP address. I don't think domain name is relevant for a home network so I won't specify one. Will let you know how it goes. David -----Ori...

...20 14:20, Philip Offermans wrote: > I have 2 samba servers. A domain controller, and a domain member. > > Domain controller(GAIA): > > /etc/hosts > 127.0.0.1 ? ? ? localhost > 192.168.88.2? ? gaia.rompen.lokaal gaia > ::1 ? ? ? ? ? ? localhost ip6-localhost ip6-loopback > ff02::1 ? ? ? ? ip6-allnodes > ff02::2 ? ? ? ? ip6-allrouters > > 127.0.1.1 ? ? ? gaia I would remove the '127.0.1.1' from /etc/hosts, ensure whatever requires it isn't using port 53 on 127.0.0.1 and that 192.168.88.2 is a fixed ipaddress for gaia > > Firewall is turned of a...

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On 10/4/2014 8:46 PM, Bhasker C V wrote: > On 04/10/14 15:36, The Cop wrote: >> Hello, >> >> I am trying to assign an IPv6 address to one of my guests. I followed the >> following guide, unsuccessfully: >> https://www.berrange.com/posts/2011/06/16/providing-ipv6-connectivity-to-virtual-guests-with-libvirt-and-kvm/

...nf > > Rowland > Hi, i need to anonimize them a bit but i can post them /etc/hosts: 127.0.0.1 localhost <dc1 ip> dc01.mydomain.net dc01 <dc2 ip> dc02.mydomain.net dc02 # The following lines are desirable for IPv6 capable hosts ::1 localhost ip6-localhost ip6-loopback ff02::1 ip6-allnodes ff02::2 ip6-allrouters resolv.conf: domain mydomain.net search mydomain.net # questo e' l'ip del dominio locale, sempre attivo CON samba4 #nameserver <dc2 ip> # questo e' l'altro dominio, da abilitare SOLO quando samba4 qui e' fermo nameserver <dc1 i...

...ompen.local/scripts read only = No [sysvol] path = /var/lib/samba/sysvol read only = No /etc/hosts DOMAIN MEMBER: 192.168.88.3 dna dna.domain.local 192.168.88.2 gaia gaia.domain.local 127.0.0.1 gaia.rompen.nl gaia 127.0.0.1 localhost ::1 localhost ip6-localhost ip6-loopback ff02::1 ip6-allnodes ff02::2 ip6-allrouters /etc/hosts DC: 127.0.0.1 localhost ::1 localhost ip6-localhost ip6-loopback ff02::1 ip6-allnodes ff02::2 ip6-allrouters 127.0.1.1 gaia /etc/resolv.conf DOMAIN MEMBER: # Generated by resolvconf domain domain.local nameserver 192.168.88.2 /etc/resolv.co...

...6 pkt: " ip6tables -A input_icmpv6_packets -j DROP ip6tables -A INPUT -p ICMPv6 -g input_icmpv6_packets After that, I got such lines in my log: Nov 16 14:57:42 yam kernel: ICMPv6 pkt: IN=eth1 OUT= MAC=33:33:ff:f9:89:a2:00:e0:4c:9f:0a:24:86:dd SRC=fe80:0000:0000:0000:1de5:d64e:a530:2977 DST=ff02:0000:0000:0000:0000:0001:fff9:89a2 LEN=72 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=ICMPv6 TYPE=135 CODE=0 Nov 16 14:57:43 yam kernel: ICMPv6 pkt: IN=eth1 OUT= MAC=00:22:15:f9:89:a2:00:e0:4c:9f:0a:24:86:dd SRC=fe80:0000:0000:0000:1de5:d64e:a530:2977 DST=fe80:0000:0000:0000:0222:15ff:fef9:89a2 LEN=72 TC=0...

/etc/hostname:villach-file /etc/hosts:# The following lines are desirable for IPv6 capable hosts /etc/hosts:::1 localhost ip6-localhost ip6-loopback /etc/hosts:ff02::1 ip6-allnodes /etc/hosts:ff02::2 ip6-allrouters /etc/hosts:127.0.0.1 localhost /etc/hosts:192.168.16.214 villach-file /etc/krb5.conf:[libdefaults] /etc/krb5.conf: default_realm = AD.TAO.AT /etc/krb5.conf: dns_lookup_realm = true /etc/krb5.conf: dns_lookup_kdc = true /etc/krb5.conf: default_keyta...

...le.de This should just be 'client' > client:~ # more /etc/hosts > > 127.0.0.1       localhost > > # special IPv6 addresses > ::1             localhost ipv6-localhost ipv6-loopback > > fe00::0         ipv6-localnet > > ff00::0         ipv6-mcastprefix > ff02::1         ipv6-allnodes > ff02::2         ipv6-allrouters > ff02::3         ipv6-allhosts > 192.168.1.4     client.loc.example.de client.loc.example.de The line above should be: 192.168.1.4     client.loc.example.de client > > client:~ # more /etc/resolv.conf > search loc.ex...