Displaying 10 results from an estimated 10 matches for "fe62".
Did you mean:
fe12
2013 Nov 05
2
syslinux.efi pxeboot across multiple subnets
The same client was used for syslinux.efi (both success on same subnet and
failure on different subnet) and grub.efi. The DHCP host block is setup
like:
host testing {
hardware ethernet {mac} ;
next-server 10.16.195.178 ;
filename "rhel64/syslinux.efi" ;
}
I'll pull a tcpdump filtering by the IP tomorrow when I get back to the
systems.
On Mon, Nov 4, 2013 at 6:41 PM,
2014 Aug 26
2
Tinc on NixOS
...' in my tinc-up,
I loose network access on the box (no ping/ssh to the box). I see tun0
interface created, but no data flows.
eno1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.1.10 netmask 255.255.255.0 broadcast 192.168.1.255
inet6 fe80::c23f:d5ff:fe62:8353 prefixlen 64 scopeid 0x20<link>
ether c0:3f:d5:62:83:53 txqueuelen 1000 (Ethernet)
RX packets 33611293 bytes 45550645568 (42.4 GiB)
RX errors 0 dropped 42 overruns 0 frame 0
TX packets 22359766 bytes 26366564624 (24.5 GiB)
TX errors 0 dro...
2018 Apr 27
2
connecting host and guest vm using a dummy nic
....
I've created a dummy interface with these commands:
$ ip link add ens99-dummy type dummy
$ ip link set ens99-dummy address 52:54:00:1f:d0:ff
this resulted with this output:
$ ifconfig ens99-dummy
ens99-dummy Link encap:Ethernet HWaddr 52:54:00:1F:D0:FF
inet6 addr: fe80::84b5:24ff:fe62:c16d/64 Scope:Link
UP BROADCAST RUNNING NOARP MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:899 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:321727 (314.1 KiB)...
2013 Nov 05
0
syslinux.efi pxeboot across multiple subnets
...rify I wasn't still using 6.01 by mistake. Please let me know if any more information would be helpful. Thanks all your help.
mirrored-port# tcpdump -i eth0 -vv
09:52:52.687565 IP6 (hlim 1, next-header OSPF (89) payload length: 36)
fe80::a17:f4ff:fe62:631f > ff02::5: OSPFv3-hello 36: rtrid 2.2.2.2 backbone
V6/E/R ifid 0.0.0.32 pri 1 int 10 dead 40 dr 2.2.2.2 nbrs
09:52:58.795974 IP (tos 0xc0, ttl 1, id 57703, offset 0, flags [none],
proto OSPF (89), length 64) 10.16.233.1 > 224.0.0.5: OSPFv2, Hello, length: 44
<snip/>
2005 Jan 10
3
REDIRECT + shorewall drop for dynamic blacklists
....1/8 brd 127.255.255.255 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: mtu 1500 qdisc pfifo_fast qlen 1000
link/ether 00:60:67:62:a0:c1 brd ff:ff:ff:ff:ff:ff
inet 192.168.1.1/24 brd 192.168.1.255 scope global eth0
inet6 fe80::260:67ff:fe62:a0c1/64 scope link
valid_lft forever preferred_lft forever
3: eth1: mtu 1500 qdisc pfifo_fast qlen 1000
link/ether 52:54:4c:04:a3:12 brd ff:ff:ff:ff:ff:ff
inet w.x.y.z/22 brd w.x.y.255 scope global eth1
inet6 fe80::5054:4cff:fe04:a312/64 scope link
valid_lft forever prefer...
2018 Apr 30
0
Re: connecting host and guest vm using a dummy nic
...e with these commands:
> $ ip link add ens99-dummy type dummy
> $ ip link set ens99-dummy address 52:54:00:1f:d0:ff
>
> this resulted with this output:
> $ ifconfig ens99-dummy
> ens99-dummy Link encap:Ethernet HWaddr 52:54:00:1F:D0:FF
> inet6 addr: fe80::84b5:24ff:fe62:c16d/64 Scope:Link
> UP BROADCAST RUNNING NOARP MTU:1500 Metric:1
> RX packets:0 errors:0 dropped:0 overruns:0 frame:0
> TX packets:899 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:1000
> RX bytes:0 (0.0 B) TX...
2013 Nov 05
2
syslinux.efi pxeboot across multiple subnets
...ng 6.01 by mistake. Please
> let me know if any more
> information would be helpful. Thanks all your help.
>
> mirrored-port# tcpdump -i eth0 -vv
> 09:52:52.687565 IP6 (hlim 1, next-header OSPF (89) payload length: 36)
> fe80::a17:f4ff:fe62:631f > ff02::5: OSPFv3-hello 36: rtrid 2.2.2.2 backbone
> V6/E/R ifid 0.0.0.32 pri 1 int 10 dead 40 dr 2.2.2.2 nbrs
> 09:52:58.795974 IP (tos 0xc0, ttl 1, id 57703, offset 0, flags [none],
> proto OSPF (89), length 64) 10.16.233.1 > 224.0.0.5: OSPFv2, Hello,
> length: 44
> <...
2018 Apr 30
2
Re: connecting host and guest vm using a dummy nic
...ip link add ens99-dummy type dummy
> > $ ip link set ens99-dummy address 52:54:00:1f:d0:ff
> >
> > this resulted with this output:
> > $ ifconfig ens99-dummy
> > ens99-dummy Link encap:Ethernet HWaddr 52:54:00:1F:D0:FF
> > inet6 addr: fe80::84b5:24ff:fe62:c16d/64 Scope:Link
> > UP BROADCAST RUNNING NOARP MTU:1500 Metric:1
> > RX packets:0 errors:0 dropped:0 overruns:0 frame:0
> > TX packets:899 errors:0 dropped:0 overruns:0 carrier:0
> > collisions:0 txqueuelen:1000
> >...
2018 May 01
0
Re: connecting host and guest vm using a dummy nic
...-dummy type dummy
>>> $ ip link set ens99-dummy address 52:54:00:1f:d0:ff
>>>
>>> this resulted with this output:
>>> $ ifconfig ens99-dummy
>>> ens99-dummy Link encap:Ethernet HWaddr 52:54:00:1F:D0:FF
>>> inet6 addr: fe80::84b5:24ff:fe62:c16d/64 Scope:Link
>>> UP BROADCAST RUNNING NOARP MTU:1500 Metric:1
>>> RX packets:0 errors:0 dropped:0 overruns:0 frame:0
>>> TX packets:899 errors:0 dropped:0 overruns:0 carrier:0
>>> collisions:0 txqueuelen:1000
>&g...
2018 May 01
2
Re: connecting host and guest vm using a dummy nic
...;> $ ip link set ens99-dummy address 52:54:00:1f:d0:ff
> >>>
> >>> this resulted with this output:
> >>> $ ifconfig ens99-dummy
> >>> ens99-dummy Link encap:Ethernet HWaddr 52:54:00:1F:D0:FF
> >>> inet6 addr: fe80::84b5:24ff:fe62:c16d/64 Scope:Link
> >>> UP BROADCAST RUNNING NOARP MTU:1500 Metric:1
> >>> RX packets:0 errors:0 dropped:0 overruns:0 frame:0
> >>> TX packets:899 errors:0 dropped:0 overruns:0 carrier:0
> >>> collisions:0 tx...