Displaying 15 results from an estimated 15 matches for "fe30".
Did you mean:
fc30
2017 Dec 02
2
pjsip subscribe (presence) always returns: No matching endpoint found
...include=>local-extens
include=>trunk-out
This is the exact subscribe message and reply as recored by the Snom M9 Logging facility.
2017/12/02 11:58:00 [SIP-Reg:5]: SIP Tx udp:[2001:4060:dead:beef::1]:5060:
SUBSCRIBE sip:11 at woody.ch SIP/2.0
Via: SIP/2.0/UDP [2001:4060:dead:d1d0:204:13ff:fe30:228d]:2799;branch=z9hG4bK-88k838;rport
From: "Beno?t Panizzon" <sip:11 at woody.ch>;tag=fg0ojl
To: "Beno?t Panizzon" <sip:11 at woody.ch>
Call-ID: 6lrsku1p at snom
CSeq: 933701145 SUBSCRIBE
Max-Forwards: 70
Contact: <sip:11@[2001:4060:dead:d1d0:204:13ff:fe30:228d]...
2017 Nov 19
2
pjsip subscribe (presence) always returns: No matching endpoint found
Hi Joshua
thank you for the quick reply
> Have you checked the Asterisk console when PJSIP is loaded to see if
> the endpoint did not load for some reason? Does it show up in "pjsip
> show endpoints"?
Yes, the endpoint shows up.
Endpoint: 11/(scrubbed from mail) Not in use 0 of inf
InAuth: 11/11
Aor: 11
2004 Jan 14
4
re hardware requirement - asterisk
...rface.
fxp0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
address: 00:02:55:30:54:28
media: Ethernet autoselect (100baseTX full-duplex)
status: active
inet 192.168.1.1 netmask 0xffffff00 broadcast 192.168.1.255
inet6 fe80::202:55ff:fe30:5428%fxp0 prefixlen 64 scopeid 0x1
xl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
address: 00:01:02:78:11:e8
media: Ethernet autoselect (10baseT)
status: active
inet 203.219.167.126 netmask 0xfffffffc broadcast 203.219.167.127
ine...
2005 Sep 05
1
RE: SATA detect fails on ICH7 chipset / DellPoweredgeSC430
...lt;TAbort- <MAbort- >SERR- <PERR-
> Latency: 0
> Interrupt: pin C routed to IRQ 20
> Region 0: I/O ports at fe00 [size=8]
> Region 1: I/O ports at fe10 [size=4]
> Region 2: I/O ports at fe20 [size=8]
> Region 3: I/O ports at fe30 [size=4]
> Region 4: I/O ports at fea0 [size=16]
> Region 5: Memory at 40000000 (32-bit,
> non-prefetchable) [size=1K]
> Capabilities: [70] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot+,D3c...
2024 Jan 07
1
Possible bug using FLAG_WORD_BREAKS with fullwidth Unicode codepoints
...case at
least:
diff --git a/xapian-core/queryparser/word-breaker.cc b/xapian-core/queryparser/word-breaker.cc
index 8108523ccd53..4fabc23f4b56 100644
--- a/xapian-core/queryparser/word-breaker.cc
+++ b/xapian-core/queryparser/word-breaker.cc
@@ -103,7 +103,7 @@ is_unbroken_script(unsigned p)
// FE30..FE4F; CJK Compatibility Forms
0xFE30 - 1, 0xFE4F,
// FF00..FFEF; Halfwidth and Fullwidth Forms
- 0xFF00 - 1, 0xFFEF,
+ //0xFF00 - 1, 0xFFEF,
// 1AFF0..1AFFF; Kana Extended-B
// 1B000..1B0FF; Kana Supplement
// 1B100..1B12F; Kana Extended-A
If we're fixing it this way we should check...
2017 Nov 19
2
pjsip subscribe (presence) always returns: No matching endpoint found
...fy_frequency=10
mailboxes=11
voicemail_extension=411
And in the dialplan I changed:
[localuser]
exten => 11,hint,PJSIP/11
But I constantly get:
Request 'SUBSCRIBE' from '"Beno?t Panizzon PJSIP" <sip:11 at woody.ch>'
failed for '2001:4060:dead:d1d0:204:13ff:fe30:228d:2332' (callid:
ow21f3eg at snom) - No matching endpoint found
And I in the logger I see that the subscriber request is being rejected
with error 404.
Any hints what I'm doing wrong?
-Beno?t-
2018 Jan 09
2
pjsip rtp_ipv6=yes but endpoint registered via ipv4 (IP4 contact infor)
...1
a=rtpmap:8 PCMA/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-16
a=ptime:20
a=maxptime:150
a=sendrecv
Errr... how should my client @ 157.161.4.172 send udp to
2001:4060:dead:beef::1?
Also when I compare with a real IPv6 client I notice from the client:
c=IN IP6 2001:4060:1:4133:204:13ff:fe30:2a80
from the Asterisk:
c=IN IP4 2001:4060:dead:beef::1
Shouldn't that also be IP6 from the asterisk?
Mit freundlichen Gr?ssen
-Beno?t Panizzon-
--
I m p r o W a r e A G - Leiter Commerce Kunden
______________________________________________________
Zurlindenstrasse 29...
2011 Mar 05
4
SATA pass-through woes
...tus: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 20
Region 0: I/O ports at fe00 [size=8]
Region 1: I/O ports at fe10 [size=4]
Region 2: I/O ports at fe20 [size=8]
Region 3: I/O ports at fe30 [size=4]
Region 4: I/O ports at fec0 [size=16]
Region 5: I/O ports at ecc0 [size=16]
Capabilities: [70] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [b0] PCIe advanced features...
2005 Aug 31
0
Re: SATA detect fails on ICH7 chipset / DellPoweredgeSC430
...ers cc=IDE (rev 01) (prog-if 8f
[Master SecP SecO PriP PriO])
Subsystem: Dell: Unknown device 01ae
Flags: bus master, 66Mhz, medium devsel, latency 0, IRQ 20
I/O ports at fe00 [size=8]
I/O ports at fe10 [size=4]
I/O ports at fe20 [size=8]
I/O ports at fe30 [size=4]
I/O ports at fea0 [size=16]
Memory at 40000000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [70] Power Management version 2
I just noticed the hypervisor leaves a message on the screen:
(XEN) *** Serial input -> DOM0 (type ''CTRL-a'' three...
2024 Jan 08
1
Possible bug using FLAG_WORD_BREAKS with fullwidth Unicode codepoints
...n-core/queryparser/word-breaker.cc b/xapian-core/queryparser/word-breaker.cc
index 8108523ccd53..6122dcdccc97 100644
--- a/xapian-core/queryparser/word-breaker.cc
+++ b/xapian-core/queryparser/word-breaker.cc
@@ -102,8 +102,10 @@ is_unbroken_script(unsigned p)
0xF900 - 1, 0xFAFF,
// FE30..FE4F; CJK Compatibility Forms
0xFE30 - 1, 0xFE4F,
- // FF00..FFEF; Halfwidth and Fullwidth Forms
- 0xFF00 - 1, 0xFFEF,
+ // FF00..FF60: Fullwidth Numbers, Latin Characters, Punctuation
+ // FF61..FF64: Halfwidth Punctuation
+ 0xFF65 - 1, 0xFFDC, // Halfwidth K...
2024 Jan 04
1
Possible bug using FLAG_WORD_BREAKS with fullwidth Unicode codepoints
I think I found a bug in Xapian 1.5 when using FLAG_WORD_BREAKS for input that contains characters in Unicode Halfwidth and Fullwidth Forms (https://unicode.org/charts/PDF/UFF00.pdf).
Since I am undecided yet if and how to fix this in Xapian I haven't come up with a pull request. Because trac currently is offline, I could not file a bug. I hope it's OK to post my analysis here first,
2006 May 18
3
Centos 4.3 and Card Reader
CentOS 4.3 (fully updated, including CentOS Plus kernel).
Running KDE 3.5.2 (fully updated from redhat.kde repo).
I can't seem to get the OS to recognize my SD card when inserted into my USB
card reader. Mepis 6 Beta 3 has no problem with it. DMESG sees nothing
happening when the card is inserted. USB-STORAGE module is loaded.
2008 Jul 07
5
IPSEC tunnel up, but no traffic coming through
...6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast qlen
1000
link/ether 00:10:18:30:53:1c brd ff:ff:ff:ff:ff:ff
inet 192.168.0.254/24 brd 192.168.0.255 scope global eth2
inet6 fe80::210:18ff:fe30:531c/64 scope link
valid_lft forever preferred_lft forever
3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast qlen
1000
link/ether 00:19:b9:f2:f9:62 brd ff:ff:ff:ff:ff:ff
inet 192.168.6.254/24 brd 192.168.6.255 scope global eth1
inet6 fe80::219:b9ff:f...
2007 Jun 05
7
Chinese, Japanese, Korean Tokenizer.
Hi,
I am looking for Chinese Japanese and Korean tokenizer that could can
be use to tokenize terms for CJK languages. I am not very familiar
with these languages however I think that these languages contains one
or more words in one symbol which it make more difficult to tokenize
into searchable terms.
Lucene has CJK Tokenizer ... and I am looking around if there is some
open source that we
2007 Mar 15
15
dom0 networking disabled
...ork-script network-bridge)
(vif-script vif-bridge)
(dom0-min-mem 196)
(dom0-cpus 0)
***** IFCONFIG AFTER NETWORK-BRIDGE *****
eth0 Link encap:Ethernet HWaddr 00:18:8B:30:42:1A
inet addr:146.6.135.253 Bcast:146.6.135.255 Mask:255.255.255.0
inet6 addr: fe80::218:8bff:fe30:421a/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:428106 errors:0 dropped:0 overruns:0 frame:0
TX packets:954 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:90445670 (86.2 MiB) TX bytes:519...