search for: faulty

...common Brick2: urd-gds-032:/urd-gds/gds-common Brick3: urd-gds-030:/urd-gds/gds-common (arbiter) Options Reconfigured: cluster.granular-entry-heal: on storage.fips-mode-rchecksum: on transport.address-family: inet performance.client-io-threads: off features.barrier: disable The arbiter node has a faulty root disk but it is still up and glusterd is still running. I have a spare server equal to the arbiter node, so my plan is to replace the arbiter host and then I can calmly reinstall OS and fix the rest of the configuration on the faulty host to be used in another cluster. I want to use the same h...

...at all. We want them to use multipathing from the very beginning, so /boot and / are already seen by multipathd. Problem is, that the Sun 7310 has two storage heads which run in active/passive mode. BUT the multipathd thinks, they are active/active and therefor shows half the available paths as faulty (multipath -ll below) While this probably gives me the redundancy that is desired, it is a relatively messy situation, since it will be unnecessary hard to detect real path failures and the OS is complaining about "readsector0 checker reports path is down" which gives me >40M/24h /...

...common Brick2: urd-gds-032:/urd-gds/gds-common Brick3: urd-gds-030:/urd-gds/gds-common (arbiter) Options Reconfigured: cluster.granular-entry-heal: on storage.fips-mode-rchecksum: on transport.address-family: inet performance.client-io-threads: off features.barrier: disable The arbiter node has a faulty root disk but it is still up and glusterd is still running. I have a spare server equal to the arbiter node, so my plan is to replace the arbiter host and then I can calmly reinstall OS and fix the rest of the configuration on the faulty host to be used in another cluster. I want to use the same h...

...ready] XXX....... 7/20 5:0:0:4 sdr 65:16 1 [active][ready] XXX....... 7/20 5:0:0:16388 sds 65:32 1 [active][ready] XXX....... 7/20 5:0:0:32772 sdt 65:48 1 [active][ready] XXX....... 7/20 5:0:0:49156 sdu 65:64 1 [active][ready] XXX....... 7/20 5:0:0:5 sdv 65:80 0 [undef] [faulty] [orphan] 5:0:0:16389 sdw 65:96 0 [undef] [faulty] [orphan] 5:0:0:32773 sdx 65:112 0 [undef] [faulty] [orphan] 5:0:0:49157 sdy 65:128 0 [undef] [faulty] [orphan] multipathd> Thanks in Adv Paras.

...e a tool called "gluster-georep-setup", which doesn't require initial passwordless step. http://aravindavk.in/blog/gluster-georep-tools/ https://github.com/aravindavk/gluster-georep-tools > > I check the status and they switch between being active with history > crawl and faulty with n/a every few second > MASTER NODE? ? MASTER VOL? ? MASTER BRICK? ? ? ? SLAVE USER? ? ? > SLAVE? ? ? ? ? ? ? ? ? ? ? ? ? ? SLAVE NODE STATUS? ? CRAWL STATUS? ? > ?LAST_SYNCED > -------------------------------------------------------------------------------------------------------...

...gv0 (arbiter) Options Reconfigured: nfs.disable: on transport.address-family: inet I set up passwordless ssh login from all the master servers to all the slave servers then created and started the geo replicated volume I check the status and they switch between being active with history crawl and faulty with n/a every few second MASTER NODE MASTER VOL MASTER BRICK SLAVE USER SLAVE SLAVE NODE STATUS CRAWL STATUS LAST_SYNCED ------------------------------------------------------------------------------------------------------------------------------...

..." part of toLatex(sessionInfo()). The fact that there is no spaces between the various "locale" variables means that LaTeX cannot easily find an appropriate place to break the lines, and some will get printed off screen. Below is the text output, and this .pdf document [1] shows the (faulty) tex result. Could anyone suggest how to get around this issue? Thank you Liviu [1] http://s000.tinyupload.com/index.php?file_id=06259544336960829228 > sessionInfo() R version 2.9.1 (2009-06-26) x86_64-pc-linux-gnu locale: LC_CTYPE=en_GB.UTF-8;LC_NUMERIC=C;LC_TIME=en_GB.UTF-8;LC_COLLATE=en_G...

...I [repce(/mnt/storage/lapbacks):92:service_loop] RepceServer: terminating on reaching EOF. [2017-08-16 12:57:45.280275] I [syncdutils(/mnt/storage/lapbacks):252:finalize] <top>: exiting. [2017-08-16 12:57:45.302642] I [gsyncdstatus(monitor):241:set_worker_status] GeorepStatus: Worker Status: Faulty The session status becomes faulty then it tries again and it enters in a loop. Both backend storages on the master and slave are ext4. Could you please help me? -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.gluster.org/pipermail/gluster-users/a...

.../2017 ? 21:07, Daniel Berteaud a ?crit?: >> >> Le 13/11/2017 ? 10:04, Daniel Berteaud a ?crit?: >>> >>> Could I just remove the content of the brick (including the >>> .glusterfs directory) and reconnect ? >>> >> If it is only the brick that is faulty on the bad node, but everything else is fine, like glusterd running, the node being a part of the trusted storage pool etc,? you could just kill the brick first and do step-13 in "10.6.2. Replacing a Host Machine with the Same Hostname", (the mkdir of non-existent dir, followed by set...

Le 15/11/2017 ? 09:45, Ravishankar N a ?crit?: > If it is only the brick that is faulty on the bad node, but everything > else is fine, like glusterd running, the node being a part of the > trusted storage pool etc,? you could just kill the brick first and do > step-13 in "10.6.2. Replacing a Host Machine with the Same Hostname", > (the mkdir of non-existent...

...ient-1=0x000000000000000000000000 > trusted.gfid=0xe86c24e5fc6b4fc6bf2b896f3cc8537d > > I can guarantee Gluster will heal from the correct one to the bad. And in case of both having a non nul afr, I can manually (using setfattr) set the afr attribute to a null value before reconnecting the faulty brick, and it'll heal from the correct one. With the above xattrs, the correct node will be used as source. Ideally, good node must have trusted.afr.vmstore-client-1 as non-zero (IOWs it blames the second brick, i.e client-1) and the bad node must have all zeroes. > And for files which ha...

On 11/16/2017 12:54 PM, Daniel Berteaud wrote: > Le 15/11/2017 ? 09:45, Ravishankar N a ?crit?: >> If it is only the brick that is faulty on the bad node, but >> everything else is fine, like glusterd running, the node being a part >> of the trusted storage pool etc,? you could just kill the brick first >> and do step-13 in "10.6.2. Replacing a Host Machine with the Same >> Hostname", (the mkdir...

...ably post some more about it as I have other questions regarding to this failure), but anyway, I had data corruption, I had to disconnect one brick and continue on a single one. On this brick still alive, all the files have been modified, some renamed, some created. Now, I need to reconnect the faulty brick. It still have data, but which I want to discard. I don't want to reconnect it right away because I'm not sure what's the state of the data on this brick for Gluster, I'd just like to discard everything and sync from the running brick. I red http://docs.gluster.org/en/lat...

Hi all, I setup my gluster cluster with geo-replication a couple of weeks ago and everything worked fine! Today I descovered that one of the master nodes geo-replication status is faulty. On master side: Distributed-replicatied 2 x (2 + 1) = 6 On slave side: Replicated 1 x (2 + 1) = 3 After checking logs I see that the master node has the following error: OSError: Permission denied Looking at the slave I have the following error: remote operation failed. Path: <gfid:7c6a232d-...

Le 13/11/2017 ? 21:07, Daniel Berteaud a ?crit?: > > Le 13/11/2017 ? 10:04, Daniel Berteaud a ?crit?: >> >> Could I just remove the content of the brick (including the >> .glusterfs directory) and reconnect ? >> > > In fact, what would be the difference between reconnecting the brick > with a wiped FS, and using > > gluster volume remove-brick vmstore

...e problems here is that you are thinking in terms of 'primary' > and 'backup' DCs. You haven't got a 'primary' DC or a 'backup' DC, you > just have two DCs and they should both contain exactly the same data in > AD. Problem is, when your second DC became faulty, it may have > corrupted AD on the DC and then replicated this corruption to the > first DC. > > I would turn off the faulty DC (if it is still running), demote the > dead DC and then run 'samba-tool dbcheck' > > But, before I tried to do anything, I would ensure that t...

...afr.vmstore-client-1=0x000000000000000000000000 trusted.gfid=0xe86c24e5fc6b4fc6bf2b896f3cc8537d I can guarantee Gluster will heal from the correct one to the bad. And in case of both having a non nul afr, I can manually (using setfattr) set the afr attribute to a null value before reconnecting the faulty brick, and it'll heal from the correct one. And for files which have been deleted/renamed/created on the correct node while the bad one was offline, how are those handled ? For example, I have /mnt/bricks/vmstore/prod/contis_sys.qcow2 ont btoh bricks. But, on the correct one, the file was del...

...anova(f1.qr,f2.qr) #Error! #Error in anova.rqlist(object, ...) : Models aren't nested Are the models in fact not nested? If they are nested, is there an easy workaround I could use? Many thanks in anticipation. -- View this message in context: http://r.789695.n4.nabble.com/ANOVA-in-quantreg-faulty-test-for-nesting-tp4571994p4571994.html Sent from the R help mailing list archive at Nabble.com.

One of my disks in the zfs raidz2 pool developed some mechanical faliure and had to be replaced. It is possible that I may have swaped the sata cables during the exchange, but this has never been a problem before in my previous tests. What concerns me is the output from zpool status for the c2d0 disk. The exchanged disk is now c3d0 but is no longer a part of the pool?! This is build_75 on x86

Hi, I just configured samba (2.2.6) on a Linux box (2.4.18) to act as a PDC. I can bring W2K PCs into the domain, and I can read the data on exported shares. However, when I try to write data, the following occurs: 1. trying to create directories (AKA folders :-) from the W2K GUI using "New Folder": Error Message Box "Unable to create the folder 'New Folder'. Cannot create a