search for: faliure

Help! I have 10 nodes: Ocfs2 1.2.4 RHEL4 U4 (AMD64) Kernel 2.6.9-42.ELsmp While running fsck.ocfs2 I am getting a lot of these. o2fsck_mark_cluster_allocated: Internal logic faliure !! duplicate cluster <bunch of numbers> Then I get a deluge of "Bad magic number in inode while trying to verify the type of directory entry <filename>" Is fsck failing to fix things, or is there something else wrong? Each time I re-run fsck it happens again, altho...

One of my disks in the zfs raidz2 pool developed some mechanical faliure and had to be replaced. It is possible that I may have swaped the sata cables during the exchange, but this has never been a problem before in my previous tests. What concerns me is the output from zpool status for the c2d0 disk. The exchanged disk is now c3d0 but is no longer a part of the pool?!...

...me_nsec: 0x33de5143 -- 870207811 Last Extblk: 0 Sub Alloc Slot: 4 Sub Alloc Bit: 544 Tree Depth: 0 Count: 243 Next Free Rec: 1 ## Offset Clusters Block# 0 0 1 20289216 fsck.ocfs2 gives internal logic failures (or faliures ;) amongst other things, which sounds pretty bad. Is it? [root@jic55124 ~]# fsck.ocfs2 -fn /dev/sdf1 Checking OCFS2 filesystem in /dev/sdf1: label: oracle uuid: e4 18 cb 00 24 2f 4d f2 96 b4 6f 3b 0a e9 b2 e8 number of blocks: 243930952 bytes per block:...

...me_nsec: 0x33de5143 -- 870207811 Last Extblk: 0 Sub Alloc Slot: 4 Sub Alloc Bit: 544 Tree Depth: 0 Count: 243 Next Free Rec: 1 ## Offset Clusters Block# 0 0 1 20289216 fsck.ocfs2 gives internal logic failures (or faliures ;) amongst other things, which sounds pretty bad. Is it? [root@jic55124 ~]# fsck.ocfs2 -fn /dev/sdf1 Checking OCFS2 filesystem in /dev/sdf1: label: oracle uuid: e4 18 cb 00 24 2f 4d f2 96 b4 6f 3b 0a e9 b2 e8 number of blocks: 243930952 bytes per block:...

Hello, I build FireFox-46.0.1 source with llvm to test interprocedural register allocation. The build was successful with out any runtime faliures, here are few stats: Measure W/O IPRA WITH IPRA ======= ======== ========= Total Build Time 76 mins 82.3 mins 8% increment Octane v2.0 JS Benchmark Score (higher is better) 18675.69 19665.16 5% improvement Kraken JS Benchmark time (lower is better) 1416.2 ms 1421.3 ms 0.35% regression JetStream...

...> On Sun, Jun 19, 2016 at 11:41 AM, vivek pandya via llvm-dev > <llvm-dev at lists.llvm.org> wrote: > > Hello, > > > > I build FireFox-46.0.1 source with llvm to test interprocedural register > > allocation. > > The build was successful with out any runtime faliures, here are few > stats: > > This is very good, thanks for working on this. > > > > > Measure W/O IPRA WITH IPRA > > ======= ======== ========= > > Total Build Time 76 mins 82.3 mins 8% increment > > Octane v2.0 JS Benchmark Score (higher is better) 18675.69...

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi everyone, simple question: how can I execute a "fsck.ocfs2 /dev/sdf"? All I get is - ---snip--- myhost:~ # fsck.ocfs2 /dev/sdf fsck.ocfs2 1.4.3 Checking OCFS2 filesystem in /dev/sdf: Label: SAP01 UUID: 5969C8CABB854F8EA9C17B5B8DE48EC6 Number of blocks: 183500800 Block size: 4096 Number of

...and just update the docker image, and then use perfherder to compare the results. HTH Axel On 19/06/16 20:41, vivek pandya wrote: > Hello, > > I build FireFox-46.0.1 source with llvm to test interprocedural > register allocation. > The build was successful with out any runtime faliures, here are few > stats: > > Measure W/O IPRAWITH IPRA > ======================== > Total Build Time76 mins82.3 mins8% increment > Octane v2.0 JS Benchmark Score (higher is better)18675.69 19665.165% > improvement > Kraken JS Benchmark time (lower is better)1416.2 ms 1421.3...

Hi All, I seem to be having a problem with all my VSPs. When I am registering with them I don't seem to be passing my port number. This problem causes other users the inability to call my VoIP number with the VSP. My VSP showed me what they are seeing. I have changed my useragent to be: Linksys/SPA941-4.1.15 Linksys/SPA941-4.1.15 Contact sip:1234321234@aa.bb.cc.dd with no

...48, 1] libsmb/clikrb5.c:ads_krb5_mk_req(276) krb5_get_credentials failed for spock$@PETENET.BRITERSEN.CO.UK (Unknown error -1765328343) [2003/11/24 06:20:48, 1] utils/net_ads.c:ads_startup(181) ads_connect: Operations error [2003/11/24 06:20:48, 2] utils/net.c:main(758) return code = -1 The faliure to get the info on spock$@PETENET.BRITERSEN.CO.UK concerns me, but I don't know enough to trace this further. At this point, I have no idea whether this is a problem with the samba server, or with the security settings on the win2k domain controller. All help greatly appreciated, Petersen

...r installed in /opt/solr, SOLR_PID_DIR is /data > # and that all configuration exists in /etc/default/solr.in.sh which is the case if previously installed as an init.d service > # change port in pid file if differs > # note that it is configured to auto restart solr if it fails (Restart=on-faliure) and that's the motivation indeed :) > # to switch from systemv (init.d) to systemd, do the following after creating this file: > # sudo systemctl daemon-reload > # sudo service solr stop # if already running > # sudo systemctl enable solr > # systemctl start solr > # this was...

...essages similar to "clock skew too great". - Check List [1] Ensure smb, winbind, nscd are not running. [2] Delete/move all old tdb files. /etc/samba/secrets.tdb /var/cache/samba/*.tdb [3] Add OpenLDAP server and AD Domain controller entries to /etc/hosts. This is in case there is a DNS faliure. [4] Ensure system time is same as your ADDC. /etc/init.d/ntpd start Gentoo NTP guide<http://www.gentoo.org/proj/en/infrastructure/config-ntp.xml> [5] Edit your /etc/ldap.conf file and your /etc/openldap/ldap.conf file. Make sure they are pointing to your OpenLDAP server. A very nice guid...

...hs assume solr installed in /opt/solr, SOLR_PID_DIR is /data # and that all configuration exists in /etc/default/solr.in.sh which is the case if previously installed as an init.d service # change port in pid file if differs # note that it is configured to auto restart solr if it fails (Restart=on-faliure) and that's the motivation indeed :) # to switch from systemv (init.d) to systemd, do the following after creating this file: # sudo systemctl daemon-reload # sudo service solr stop # if already running # sudo systemctl enable solr # systemctl start solr # this was inspired by https://conflue...

...r installed in /opt/solr, SOLR_PID_DIR is /data > # and that all configuration exists in /etc/default/solr.in.sh which is the case if previously installed as an init.d service > # change port in pid file if differs > # note that it is configured to auto restart solr if it fails (Restart=on-faliure) and that's the motivation indeed :) > # to switch from systemv (init.d) to systemd, do the following after creating this file: > # sudo systemctl daemon-reload > # sudo service solr stop # if already running > # sudo systemctl enable solr > # systemctl start solr > # this was...

Dear Daniel. Thank you for your kind reply. Regarding NFS, no, there is nothing like this in my setup. Deleteing SOLR and recreating it, I did it so many times already. I started with *your* setup in the first place, as FTS_squat (which actually works very well and very straightforward, I have no clue why going for SOlr which is just a pain and not maintaining squat), and it leads to

...Linux RAID over conventional RAID: it is easy to migrate from a single disk to a RAID configuration. First we need to partition the second disk exactly like the first: # sfdisk -d /dev/sda > ~/partitions.sda Having this data backed up is an incredibly good idea. I experienced a catastrophic faliure on one server once by enabling DMA with a buggy OSB4 driver. The partition table was destroyed. Using the partition data backed up in the manner above i was able to restore the partition to find that my data (an important IMAP store) was still intact. Duplicating the partition table (or restoring...