search for: f6c550

Hello list, I am trying to configure Belkin F6C550-AVR UPS on a Squeeze server. I try with "usbhid-ups" but I get "(driver(s) failed)" message on service start. This is my config: nano /etc/nut/nut.conf MODE=standalone nano /etc/nut/ups.conf [belkin] driver = usbhid-ups #driver = megatec_usb port = auto nano /etc/nut/upsd.c...

Hello, I am attempting to set up nut 2.6.2-1on a Fedora Core 14 64-bit platform for Belkin F6C550-AVR. The installation is from the official Fedora RPM. /etc/ups/ups.conf is as follows: [belkin] #??? driver = blazer_usb ??? driver = usbhid-ups ??? port = auto Attempting as root: [root at calypso ~]# upsdrvctl start Network UPS Tools - UPS driver controller 2.6.2 Network UPS Tools - Generic H...

Zaid, I have a Belkin F6C800-UNV which has both a serial and USB connector. The serial connection is already working with the Belkinunv driver. I will connect via the USB and then compare both sets of variables. This should allow me to correlate and shed some light on the meaning of many of Belkin's non-standard "Usage" descriptors. With this information, it should be very easy

Hi, I got a Belkin F6C550-AVR UPS today and was trying to get it working with NUT, I used the "hidups" driver and got some data out of it, mainly the following: battery.charge: 100 battery.runtime: 120 driver.name: hidups driver.parameter.port: /dev/usb/hiddev0 driver.version: 2.0.0 ups.mfr: Unknown ups.model: Un...

Hi, I got a Belkin F6C550-AVR UPS today and was trying to get it working with NUT, I used the "hidups" driver and got some data out of it, mainly the following: battery.charge: 100 battery.runtime: 120 driver.name: hidups driver.parameter.port: /dev/usb/hiddev0 driver.version: 2.0.0 ups.mfr: Unknown ups.model: Un...

I just bought a pair of Belkin USB UPSes -- F6C1200-UNV and F6C550-AVR -- and installed the latest version of nut under Ubuntu 7.04. I'm using the F6C1200-UNV. My system does see the device; dmesg says [ 82.718428] usb 2-2: new low speed USB device using ohci_hcd and address 2 [ 82.941189] usb 2-2: configuration #1 chosen from 1 choice [ 83.036825] us...

I just bought a pair of Belkin USB UPSes -- F6C1200-UNV and F6C550-AVR -- and installed the latest version of nut under Ubuntu 7.04. I'm using the F6C1200-UNV. My system does see the device; dmesg says [ 82.718428] usb 2-2: new low speed USB device using ohci_hcd and address 2 [ 82.941189] usb 2-2: configuration #1 chosen from 1 choice [ 83.036825] us...

Hi, it'd be great if you could update the documentation on the website that some models of the Belkin -UNV series will only work with the megatec(_usb) drivers. I wasted a lot of time on trying to get it to work with the wrong drivers, and would like to spare others the pain :-). Thanks, ~David P.S. Some forum post said that the stable megatec drivers don't work 100% with the belkin UPS,

Hi, it'd be great if you could update the documentation on the website that some models of the Belkin -UNV series will only work with the megatec(_usb) drivers. I wasted a lot of time on trying to get it to work with the wrong drivers, and would like to spare others the pain :-). Thanks, ~David P.S. Some forum post said that the stable megatec drivers don't work 100% with the belkin UPS,

Hello, I hope someone can help me. I'm trying to get this all working without some stupid hack. So far no dice. Not sure if there is a new feature in CVS or something that might help. I'd appreciate any suggestions. Got a belkin F6C550-AVR. redhat FC3ish system libusb-0.1.8-3 nut-2.0.3-0.fc4.2 udev-039-10.FC3.8 Now first off while udev is nifty, but the whole usb udev subsystems were driving me crazy. add to that the fact that aparently my version of libusb doesnt pay attention to udev devices as well as the fact that for a wh...

...ckages.debian.org/unstable/admin/nut - installed via dpkg, not via repository) working: * problems with getting it to come up during boot * monitoring via knutclient was OK * shutdown on low battery worked adequately, if not quite as described) and newhidups suddenly stopped talking to my Belkin F6C550-AVR . It's only been in use for a couple of months, so I doubt it's a hardware problem. And in general, the USB setup works, my printer runs just fine. also installed - nut-usb nut-dev (2.0.5-3) Computer hardware: Biostar Geforce 6100 AM2 (integrated motherboard nvidia chipsets) OS: De...

Dear Sir or Ma'am, I have set-up a very functional NAS in my home using Freenas 0.7.2.5543. I had problems when losing power to the NAS. When I'd power it back on, my Raid 5 array and other disks would say that it was not properly dismounted, until I erased the disks, reformatted and remounted. The problem would then go away. I have since put an UPS between my NAS and the power to

Dear Sir or Ma'am, I have set-up a very functional NAS in my home using Freenas 0.7.2.5543. I had problems when losing power to the NAS. When I'd power it back on, my Raid 5 array and other disks would say that it was not properly dismounted, until I erased the disks, reformatted and remounted. The problem would then go away. I have since put an UPS between my NAS and the power to

Hi Peter, I got all your patches and applied them, and I wanted to say kudos for a great job done. This is the output of upsc that I'm getting right now. I had the same issue when using any cvs version (from two weeks ago) that made my UPS go into a state where it wasn't functioning normally (checking the kernel log shows that it cannot be connected and I had around a page of DEVFS_USB