search for: f4ff

Goodday, First my network layout: dsl router (10.0.0.99) | server (eth0 10.0.0.1, eth1 10.0.1.10) | 3 times windows machine (10.0.1.2, 10.0.1.3, 10.0.1.4) (all with proxy settings 10.0.1.10:8080) Now on the server is mandrake 10 installed with shorewall as firewall. And a apache webserver (and no ftp server). When i turned internet sharing on it started squid which added a line in the

The same client was used for syslinux.efi (both success on same subnet and failure on different subnet) and grub.efi. The DHCP host block is setup like: host testing { hardware ethernet {mac} ; next-server 10.16.195.178 ; filename "rhel64/syslinux.efi" ; } I'll pull a tcpdump filtering by the IP tomorrow when I get back to the systems. On Mon, Nov 4, 2013 at 6:41 PM,

...to verify I wasn't still using 6.01 by mistake. Please let me know if any more information would be helpful. Thanks all your help. mirrored-port# tcpdump -i eth0 -vv 09:52:52.687565 IP6 (hlim 1, next-header OSPF (89) payload length: 36) fe80::a17:f4ff:fe62:631f > ff02::5: OSPFv3-hello 36: rtrid 2.2.2.2 backbone V6/E/R ifid 0.0.0.32 pri 1 int 10 dead 40 dr 2.2.2.2 nbrs 09:52:58.795974 IP (tos 0xc0, ttl 1, id 57703, offset 0, flags [none], proto OSPF (89), length 64) 10.16.233.1 > 224.0.0.5: OSPFv2, Hello, length: 44 <snip/>

...e80::211:2fff:fe09:ffa1/64 scope link valid_lft forever preferred_lft forever 6: eth1: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 1000 link/ether 00:40:f4:96:96:65 brd ff:ff:ff:ff:ff:ff inet 192.168.11.253/24 brd 192.168.11.255 scope global eth1 inet6 fe80::240:f4ff:fe96:9665/64 scope link valid_lft forever preferred_lft forever 7: eth2: <BROADCAST,MULTICAST,PROMISC,UP> mtu 1500 qdisc pfifo_fast qlen 1000 link/ether 00:40:f4:96:98:17 brd ff:ff:ff:ff:ff:ff inet6 fe80::240:f4ff:fe96:9817/64 scope link valid_lft forever preferred_lft f...

...l using 6.01 by mistake. Please > let me know if any more > information would be helpful. Thanks all your help. > > mirrored-port# tcpdump -i eth0 -vv > 09:52:52.687565 IP6 (hlim 1, next-header OSPF (89) payload length: 36) > fe80::a17:f4ff:fe62:631f > ff02::5: OSPFv3-hello 36: rtrid 2.2.2.2 backbone > V6/E/R ifid 0.0.0.32 pri 1 int 10 dead 40 dr 2.2.2.2 nbrs > 09:52:58.795974 IP (tos 0xc0, ttl 1, id 57703, offset 0, flags [none], > proto OSPF (89), length 64) 10.16.233.1 > 224.0.0.5: OSPFv2, Hello, > length: 44 >...

....168.17.66 graz-dc-1b.ad.tao.at graz-dc-1b Fixed. > And this one, i should not see that, execpt if its a dhcp thats failing. > 169.254.93.226 NetName: LINKLOCAL-RFC3927-IANA-RESERVED > > And if you did disable IPv6, which you attempted, at least looks like it. > inet6 fe80::b8de:f4ff:fe1e:11e5/64 scope link is on the interface, but the ipv6 parts where missing in /etc/hosts. No idea what systemd-networkd is even doing there. None of this is intended… Fixed now. > /etc/resolv.conf > nameserver 192.168.17.1 > Only one DC? And you have 4.. For the record, that's...

Shorewall version 2.2.1 2 Interface setup. eth1: 10.10.1.3 eth0: 192.168.1.2 modem is 192.168.1.1 I need to be able to connect to my adsl modem, but when shorewall is up I get connection rejected. I have added "192.168.1.1 RETURN" above the line "192.168.0.0/16 logdrop # RFC 1918" in "/etc/shorewall/rfc1918" but still getting connection rejected Is there

...odes ff02::2 ip6-allrouters 192.168.17.66 graz-dc-1b.ad.tao.at graz-dc-1b And this one, i should not see that, execpt if its a dhcp thats failing. 169.254.93.226 NetName: LINKLOCAL-RFC3927-IANA-RESERVED And if you did disable IPv6, which you attempted, at least looks like it. inet6 fe80::b8de:f4ff:fe1e:11e5/64 scope link is on the interface, but the ipv6 parts where missing in /etc/hosts. /etc/resolv.conf nameserver 192.168.17.1 Only one DC? And you have 4.. For every DC and per site, you have 2 sites correct? I suggest, per site, 2 DC of the same site, 1 DC of the remote as backup. Lo...

Hai, Try this first. Change : /etc/krb5.conf [libdefaults] default_realm = CONYLEC.LOCAL dns_lookup_realm = true dns_lookup_kdc = true Change to [libdefaults] default_realm = CONYLEC.LOCAL dns_lookup_realm = false dns_lookup_kdc = true There is no need to lookup the REALM in the DNS, its the Default REALM. Then try again to join. But now

...host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 1000 link/ether 00:00:f4:c3:9d:ac brd ff:ff:ff:ff:ff:ff inet 192.168.0.100/16 brd 192.168.255.255 scope global eth0 inet6 fe80::200:f4ff:fec3:9dac/64 scope link valid_lft forever preferred_lft forever 3: eth1: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 1000 link/ether 00:0f:b5:42:7f:aa brd ff:ff:ff:ff:ff:ff inet 65.40.217.150/24 brd 65.40.217.255 scope global eth1 inet6 fe80::20f:b5ff:fe42:7faa...

Once again, something with Samba thirty bazillion components broke. Once again, my choices for logging are "nothing" or "15 MB/s spread of ten different files, because 'client authentication failed' totally needs to be lower priority than malloc debug info". Once again, none of these messages is actually able to convey what broke, where, why. Why is it impossible for

...; Fixed. > > > And this one, i should not see that, execpt if its a dhcp > thats failing. > > 169.254.93.226 NetName: LINKLOCAL-RFC3927-IANA-RESERVED > > > > And if you did disable IPv6, which you attempted, at least > looks like it. > > inet6 fe80::b8de:f4ff:fe1e:11e5/64 scope link is on the > interface, but the ipv6 parts where missing in /etc/hosts. > > No idea what systemd-networkd is even doing there. None of this is > intended? Fixed now. > > > /etc/resolv.conf > > nameserver 192.168.17.1 > > Only one DC? And y...