search for: extened

Hello ! I am experiencing some problems with Asterisk trunking, this is the scenario: There are 3 servers, a DID server provider (VOIP provider) which delegates us a bunch of DID numbers to our asterisk server number one (I will call it AA), from which I route the calls to Asterisk server number 2 (I will call it BB), which then terminate on phone handsets. The trouble is, that I probably

Guys I am having some serious issues with my call queue and Management is breathing down my neck pretty bad, and I am running out of ideas. I have a single queue for my tech support department. I originally was using the AgentCallbackLogin for them and it tested out great on our testing weekends, but it hasn't worked out since. It would only let one of them take calls at a time, no matter

I have an X100P clone hocked up to an analog line of my PRI. I can use it to dial out. but when I call the extension it answers and says "GOODBY" I have a Livevoip DID which successfuly rings to ext 202 I am using asterisk@home and through the AMP inface the line should ring to ext 202 Below are Asterisk Messages, Extensions.conf and Extensions_additional.conf Extensions.conf

Hello Guys, I'm somewhat of a newbie and am desperately seeking for some help... I've managed to get asterisk up and running on my server, and signed up with a broadvoice account... I'm having no problem dialing and communicating between extensions, but whenever anyone tries to call my broadvoice account, they are greeted by no ring or anything, but rather simply a direct to

Hello... I have a big problem with asterisk. Every time i make a call asterisk does not bridge the zap channels. The zap channel from which i'm calling remains in state:ring and applicaton:dial and the zap channel with the external line configured remains in state:dialling an Application:AppDial. Zap/20-1 agentie s 1 Dialing AppDial (Outgoing Line) 09399 (None) Zap/9-1 int_omg 09399 5 Ring

I currently have the following outbound-local config in my setup.... I can call SOME of the numbers (like 337xxxx, and 998xxxx, and 323xxxx).. but when I try to dial say like 601xxxx I get a 404.. any thoughts, I can't see any difference in the config. Also, I seem to be able to dial any number that starts with a 9.. such as 977, 990, 903.. [outbound-local] ;exten =>

Todd How do you have the context in the phones sip configs set? Bryant From: "Todd Reese" treese65 at gmail.com Hi all, I've been have problems with getting this system on line and would like to acquire some help with the extensions.conf. My current problem is that the phones won't dialout.on the VOIP lines listed as dialout1, dialout2, dialout3. This version of asterisk

I am making some changes to the dial plan at the request of the company president and have run into some problems. I have a couple of layers of menu's and I am not sure how to handle them. Here is how it should work (sorry for the crappy diagram) main menu --------Dial 1 for support | Dial 2 for special | Dial 3 sales

Hi, Urgently response would be wonderful, system is a Fedora Core 2. I have a Ericsson BP250 connected to 1 port on the TE405P and another connected to a local telco ISDN30. I have been running CVS-HEAD from about a 2 months ago and upgraded it again just in cause it was a version issue (didn't fix it) but this is what I am getting. When a person calls out from an extension on the BP250 to

Hi, Running Asterisk CVS-Head latest on a Dual P3 800 1Gb Ram. For some odd reason now that I have the asterisk box almost to the stage I want it, I hit a problem. I have a te405p in the system, Zap/g1 is connected to the telco as an ISDN 30, Zap/g4 is connected by ISDN Primary Rate to an Ericcson BP250 phone system. When calls come in on g1 they go straight through instantaneously to the

Hi list, i've problems with my * server and the 4 phones which are linked to it. i've 2 grandstream bt100 with the firmware upgraded to 101, a wi-fi phone (i don't know its brand) and another ip phone i don't know its brand. with this sip.conf : [general] port = 5060 bindaddr = 192.168.100.229 context = default ;x changed from default to sip localnet = 192.168.100.0/24

How many times do you ask for help here before getting a respone? Every single thing I do No matter what I get busy extensions. I am willing to pay someone to help here. Anybody got a clue? -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050802/d0d1326c/attachment.htm

I want to include a new context in my exensions.conf I have read this page http://www.voip-info.org/wiki-Asterisk+howto+dial+plan and I can sort of follow it?! I have a context [local] that I know zapata.conf points to, I have edited extensions.conf and put in my phone, sip and iax extensions. I want to add an sms context. I understand that all calls go through my [local] context and I have

hi ppl, i'm using asterisk 1.2 because i'm making use of voiceone, but before i was using asterisk 1.4 and had the same problem, it concerns an italian voip/sip provider called eutelia/skypho, my problem is the following one: when i start my pbx my skypho account is working fine, meaning that e.g. incoming calls are shown in the asterisk CLI and caller and callee can hear each other when

I cant seem to get outgoing calls to be placed properly .. No matter what I try I get an error from the PSTN company saying that the "call can not be completed as dialed" or "you need to dial a one..." The asterisk debugging seems to show the correct number being dialed out of the zap interface... the "9" is being stripped and there is a "1" where it is

hello friends, is there any way to simplify that extensions.conf file? [miprimerejemplo] exten => 20000,1,Dial(SIP/20000,30,Ttm) exten => 20000,2,Hangup exten => 20000,102,Voicemail(20000) exten => 20000,103,Hangup exten => 20100,1,Dial(SIP/20100,30,Ttm) exten => 20100,2,Hangup exten => 20100,102,Voicemail(20100) exten => 20100,103,Hangup exten =>

So I have a problem. A customer of mine wants a PBX, owns an office building. I want to sell him on asterisk. He has 4 tenants. I am using my asterisk box to simulate it. My asterisk box has a TDM400P card, not a PRI card. Don't know if it makes any difference. Anyway, I want to route incoming phone calls to different contexts based on the phone number being called. Here is my

hi ppl :D my configuration is as follows, i run (let's call it machine 2) debian etch 4.0 and asterisk 1.2, i use voiceone (www.voiceone.it) as an interface to manage asterisk, I have a grandstream/handytone 486 as a sip device, no PSTN line or anything like that all SIP only. I have a machine (machine 1), which functions as my router and machine 2 and sip device are behind it, grandstream box

Hi all, i;m obviously a newbie, its been 2 days that im trying to figure out a way to deny a specific extension (300) from calling another specific extensions (03) except if the caller punch a specified password.. sorry if im not explaining myself well.. heres an example: i called my pstn line(with 300 as its sip account), an attendant answers and asks me to punch in an extension number right

Hi, I can't receive/send calls with Asterisk. Could someone please give me a few pointers on my configuration? Regards, Norman Zhang ; sip.conf [general] disallow=all allow=ulaw port=5060 bindaddr=0.0.0.0 externip=x.x.x.x localnet=192.168.22.0 mask=255.255.255.0 context=inbound-sip maxexpirey=180 defaultexpirey=160 tos=reliability srvlookup=yes register =>