search for: ext_ip

...******************************************************* Ruleset for an old reliable IPChains firewall: file: /etc/rc.d/init.d/firewall This actually opens up a few more holes for some outbound streams. Can't remember exactly why I did it this way but it works good. # VIOP - asterisk # vars $EXT_IP=your.external.ip.here $ASTERISK_IP=your.asterisk.server.ip # #chains ipmasqadm portfw -a -P udp -L $EXT_IP 5060 -R $ASTERISK_IP 5060 ipchains -A portfw -s 0/0 1024: -d $EXT_IP 5060 -p 17 -j ACCEPT ipmasqadm portfw -a -P udp -L $EXT_IP 4569 -R $ASTERISK_IP 4569 ipchains -A portfw -s 0/0 1024: -d $EX...

...ng the syntax: "rpm -ivh ipmasqadm-0.4.2-3.i386.rpm" IGNORE INCORRECT EXAMPLES GIVEN ON SITE !!! 5 - EXAMPLE of telnet forwarding: ( add to your "chainfile script" - note: must fit in with existing rules ) /usr/sbin/ipmasqadm portfw -f /usr/sbin/ipmasqadm portfw -a -P tcp -L $ext_ip 23 -R $int_ip 23 6 - run the chainfile script and test telnet to the external interface from an external machine- should give login from destination of port redirect. POSSIBLE ERRORS: public interface gets corrupted: - re-run linuxconf and re-enter interface info. check rpm version. "100...

Hi All, I have an asterisk box on my DMZ, and I'm using a PF for my firewall, I can make a call but some reasons I have a dead air. Any Ideas? below are my rules... ext_if = "bce0" int_if = "bce1" altitude = "172.16.1.0/24" #### machines #### vbox = "172.16.1.1" uci = "172.16.1.4" voices = "203.172.x.1" ipc =

Anyone have an example XML file for the PAP2T? Cheers, j

Hi there, We have plans to install an office (not call center) with the following setup: 200 linksys 942 phones (sip + g711) on a LAN a server with a dual port E1 sangoma and a remora card with 4 fxo modules. So far when we want to setup a linksys phone, we need to use the http interface of each phone, disable/enable a lot of things and plug it into the network. this is not the best scenario for