search for: ewsd

Hi all, Has anyone got any experience with hooking Asterisk up with a Siemens EWSD 13 switch over a E1/PRI ? We're located in Belgium (Europe) and one of our telecom partners uses this switch. We connected one of our TE410P ports with their switch, but the status light on the TE410P card keeps blinking red. On their side they are getting a DSA (distance service alarm) error...

Hi All I have problem with LIBMFCR2 for once Exchange I using Sangoma card, the firstly. my ssystem run successful with MFCR2, connected to E10 (Acatel Exchange), after that, i move connection connect to EWSD (Siemens), my system don't work. error protocol R2. my system: Asterisk CVS 1.1.X LibMFCR2 pre.005 and unicall-pre.005 this's my setting and my setting wanpipe1.conf #================================================ # WANPIPE1 Configuration File #===================================...

Hello All. I'm using sangoma card A-101. tested successful with E10 (ACATEL) Exchange, connection with E1, CAS, (using unicall-0.0.3pre4). my system run success, incoming call and call out are good. when i switch to EWSD (SIEMENS) R-15 . my asterisk faill, cannot connect with EWSD. (E10 and EWSD exchange store in two provinces difference. in Vietnam) this is my logfile of E10 (successfull) Aug 17 13:25:38 WARNING[21952] chan_unicall.c: MFC/R2 UniCall/15 <- 0001 [1/ 1/Idle /Idle ]...

Hi all, We're trying to hook up our Asterisk config (Card: TE410P) with a Siemens EWSD switch. The link is ok on both ends (green), with no errors. The problem is when we try to make a call from our side (via call files), we get the pri/E1 error Ext: 1 Cause: Temporary failure (41), class = Network Congestion (2) Our Telecom partner (they checked with Siemens) mentioned that w...

Anyone have any experience using gr303? May have a need to interface * to a Siemens Class-5 CO for pstn trunking (inbound and outbound). Rich

...ne, but im in doubt Is there any possibility to pass a call from one asterisk to another and then to ZAP channel. For instance I have "A" asterisk with numbering 45670 "B" asterisk with numbering 45680 second asterisk has TE110P card with single PRI port connected to Siemens EWSD. When I originate call from asterisk "B" I reach the world thru ZAP, when I call from asterisk "A" I reach numbering of asterisk "B" but cant get to the PSTN network. ASTERISK---ASTERISK-ZAP-PSTN Should I have OpenSER for that and terminate my call on CISCO AS5350...

Hi, I have Asterisk 1.4.0 using Queue App. I use PRI connecting my Asterisk with Siemens EWSD This was working OK but since two days I have this error: [Jun 22 10:53:09] WARNING[8050] chan_zap.c: Ring requested on channel 0/3 already in use on span 1. Hanging up owner. [Jun 22 10:53:09] WARNING[8050] chan_zap.c: Ring requested on channel 0/3 already in use on span 1. Hanging up owner. [J...

...uot; Today's Topics: 1. Re: can't hear vm audio (Mark Phillips) 2. Re: Zapata required? (Mark Phillips) 3. Re: TigerJet ISDN card (Michael Welter) 4. Using Skinny with a 7905G phone (Chris Barnett) 5. Re: Asterisk & 3com nbx 100 support (Eric Wieling) 6. Re: Siemens EWSD 13 (CW_ASN) 7. Auto Attendant?? (James Moran) 8. Re: TigerJet ISDN card (Michael Welter) 9. FreeBSD port of asterisk (David W. Chapman Jr.) 10. TDM Stater kit all working - WOOHOO - wondering about Asterisk FAX Support (Kyle Hagan) 11. Re: RE: RxFax/spandsp: not disconnecting (Derek)...

Hello All. I'm using sangoma card A-101. tested successful with E10 (ACATEL) Exchange, connection with E1, CAS, (using unicall-0.0.3pre4). my system run success, incoming call and call out are good. when i switch to EWSD (SIEMENS) R-15 . my asterisk faill, cannot connect with EWSD. (E10 and EWSD exchange store in two provinces difference. in Vietnam) this is my logfile of E10 (successfull) Aug 17 13:25:38 WARNING[21952] chan_unicall.c: MFC/R2 UniCall/15 <- 0001 [1/ 1/Idle /Idle ]...

Hi I have an asterisk box with digium hardware connected to a Siemens EWSD version 15 using a crossed E1 cable. The asterisk is serving as a h323 media gateway. When i start asterisk, the Siemens gives me this alarm: REPORTES GENERADOS EN LA EWSD AES/V15SBOL/BOLCBK1V51327079/013 05-06-06 11:25:38 7773 3062/03728...

...all Waiting. Normal Caller ID works quite well, but I can't get CIDCW to work (tested against Siemens phones). I hear the tone, but a message on the console appears telling that the phone doesn't support CIDCW; when it does (it's used every day against the telephone central, a Siemens EWSD). Any ideas what could be going on? Thanks a lot, Alberto

Is there anyone successfully using the TE410P with a German "PMX-Anschluss"? Please just drop me a note mentioning the carrier you use. We are having problems making the card work, although configuration is correct (Posted this before). Our carrier blames the card for this. We would just need some evidence that it really works. Thanks, Henrik -------------- next part

...oming. Rebooting (not just restarting asterisk) solved the problem, lines become available and everything works as previous. Engineers at local telco operator said that between their equipment and our box is not synchronized. They gave us a clue how to solve it: CRC4=ON SENDING DIGIT=FULL CENTRAL EWSD=NET.3 Any information appreciated. Thank you.

Hi everyone, I have a PRI conection on an * system running Asterisk 1.0.9, libpri 1.0.9 and zaptel 1.0.9.2 connected to an AXE 10 (APZ 21220 System 64) in the network side. I know the system and the wildcard I´m using are ok because I´ve used them before with other PRI connections (to a Siemens EWSD) without any problem. First the PRI didn´t work (I got the TE110P alarmed with red). After troubleshooting with the Telco, they told me to disable crc4 and then I got the green ligth, the 30 B channels cleared, and I was able to dialout to the PSTN but only until the channels restart, because this...

hi, i have problem with pass-through faxing with this scenario hylafax(iaxmodem) - iax - asterisk1 1.2.22 - sip - asterisk2 1.2.X(xen virtual) - linksys ATA i can fax to fax2mail on hylafax but after upgrade asterisk2 to 1.4 faxing is not working hylafax(iaxmodem) - iax - asterisk1 1.2.22 - sip - asterisk2 1.4.X(xen virtual) - linksys ATA configuration is same do you hava any idea what is