search for: etherd

.../etc/init.d/ocfs2 cp vendor/common/o2cb.init /etc/init.d/o2cb cp vendor/common/o2cb.sysconfig /etc/sysconfig/o2cb I have the cluster.conf configured and the cluster is running. Whenever I try to create an ocfs2 FS, I get the following error: # mkfs.ocfs2 -v -b 4K -C 32K -N 4 -L mail_data /dev/etherd/e0.12p1 mkfs.ocfs2 1.2.1 Floating point exception any comments or assistance would be appreciated. -Jeffery P Humes -------------- next part -------------- An HTML attachment was scrubbed... URL: http://oss.oracle.com/pipermail/ocfs2-users/attachments/20060510/d045e0ca/attachment.html

hi to the list, Hello everyone, I am new in the world of pxe booting and i try to use AOE to boot my linux debian lenny machines. I install the linux like this: parted -s /dev/etherd/e10.1 mklabel gpt parted -s /dev/etherd/e10.1 mklabel gpt parted -s /dev/etherd/e10.1 mkpart primary ext3 17408B 314590207B parted -s /dev/etherd/e10.1 mkpart primary ext3 314590208B 3535815679B parted -s /dev/etherd/e10.1 mkpart primary ext3 3535815680B 4609557503B parted -s /dev/etherd/e10.1...

Dear all: I''m sorry I crossmail. I try setup aoe-vblade server on netbsd 5.0.2(domU) and I try to do some stress test with for i in {65536}; do dd if=/dev/zero of=/dev/etherd/e?.? bs=4K;done on a Linux box Two Xen dom0 configurations I use: 1. 32bits SuSE Enterprise Linux 11sp1 2.6.32.12-0.7-xen with 32bits Xen 4.0.0_21091_04-0.2.6 2. 64bits Gentoo 2.6.32-xen-r1 with 64bits Xen 4.0.0 The NIC is RTL-8169 on board After 20~40mins later, whole system (include dom0 and Xen...

On Thu, Jun 11, 2009 at 7:12 PM, Pallab Chakrabarty<pchakrabarty@spikesource.com> wrote: > No device created at /dev/etherd/ .. even no folder as “etherd” > > aoe-stat return nothing .. If you''re talking about domU, then it''s normal. Whatever the block device is on dom0 (/dev/etherd/*, /dev/mapper/*, etc.) domU sees only /dev/xvda (or whatever you tell it to be). > $virsh attach-device i-484...

I have an OCFS2 filesystem on a coraid AOE device. It mounts fine, but with heavy I/O the server self fences claiming a write timeout: (16,2):o2hb_write_timeout:164 ERROR: Heartbeat write timeout to device etherd/e0.1p1 after 12000 milliseconds (16,2):o2hb_stop_all_regions:1789 ERROR: stopping heartbeat on all active regions. Kernel panic - not syncing: ocfs2 is very sorry to be fencing this system by panicing It is my understanding that OCFS is expecting that the only heartbeat available to be on disk...

...other nodes already have the drive mounted. I have checked and rechecked all the settings, the cluster.conf is the same on all nodes, the drive haa the same uuid and the same label. The only thing that is different is the actual device name. On the host servers it is the AOE device '/dev/etherd/e0.1p11', on the VM the '/dev/etherd/e0.1' device is mapped to '/dev/sdb' so the OCFS2 partition shows up as '/dev/sdb11' The only thing I can think of is that the device names have to be the same between all hosts, but that really doesn't make any sense to me. A...

...a 3.27TB ext3 filesystem using -i 1024 and -b 1024. When I try to format this partition I get the "Filesystem too large." error. Are there any plans to update these limits? are there any patches already available that I can try out? Or am I just SOL here? (vzbu2 ~)# fdisk -l /dev/etherd/e1.1 Disk /dev/etherd/e1.1: 3600.7 GB, 3600795892224 bytes 255 heads, 63 sectors/track, 437771 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk /dev/etherd/e1.1 doesn't contain a valid partition table (vzbu2 ~)# lvdisplay --- Logical volume --- LV Name /d...

...etools are not necessary, but nice. vblade lets you export a block device to the network. I exported an lvm device (worked fine on non xen machine) with: vblade 2 0 eth0 (2 is shelf number and 0 is slot number -- can be anything). If I export from non-xen, it shows up on other machines as /dev/etherd/e2.0, but the xen machine can''t see it when others export either. (Note, vblades from your own machine don''t show up in your /dev/etherd/ -- only on other hosts) As this is dom0, I''m not sure why the aoe module is not seeing the packets (unless the bridge is messing...

We recently added a disk to our Coraid SAN. We''ve used tons of devices off of this SAN with Xen before, but this time we experienced some weird behavior. I configured a DomU to have the device directly offered as a disk (i.e. ''phy/dev/etherd/e1.1,sdb1,rw''). When I tried to boot it, an xvd process showed up as usual. However, it consumed 100% processor usage and the domain never started. I also couldn''t kill it without rebooting the machine. The only thing about this device (that I can tell) is that it has a...

...; Aborting. Failed to activate new LV to wipe the start of it. Found volume group "aoe" Unable to deactivate failed new LV. Manual intervention required. Test mode: Wiping internal cache Wiping internal VG cache pvs PV VG Fmt Attr PSize PFree /dev/etherd/e2.0 aoe lvm2 a- 9.10T 7.10T /dev/etherd/e2.4 aoe lvm2 a- 13.65T 0 vgs VG #PV #LV #SN Attr VSize VFree aoe 2 1 0 wz--n- 22.74T 7.10T lvs LV VG Attr LSize Origin Snap% Move Log Copy% Convert data aoe -wi-ao 15.65T I've run a vgscan...

...i = 1 apic = 1 localtime = 1 on_poweroff = "destroy" on_reboot = "restart" on_crash = "restart" device_model = "/usr/lib64/xen/bin/qemu-dm" usb = 1 usbdevice = "tablet" sdl = 0 vnc = 1 vncunused = 1 keymap = "pt-br" disk = [ "phy:/dev/etherd/e3.3,hda,w" ] vif = [ "mac=00:16:36:2f:fd:7c,bridge=xenbr0,script=vif-bridge,model=ne2k_pci" ] parallel = "none" serial = "pty" But, on windows I just see one CPU... I don't understand why this happen!! Thanks for any help -- Gilberto Nunes

....4-3. Kernel is version 2.6.32-5-amd64. The kernel log of the mount at boot is here: [ 18.911452] aoe: AoE v47 initialised. [ 19.686358] fuse init (API version 7.13) [ 29.000017] eth2: no IPv6 routers present [ 36.212109] aoe: 003048f28d36 e1.1 vace0 has 9767625597 sectors [ 36.212218] etherd/e1.1: unknown partition table [ 59.715506] OCFS2 Node Manager 1.5.0 [ 59.732002] OCFS2 DLM 1.5.0 [ 59.733343] ocfs2: Registered cluster interface o2cb [ 59.749185] OCFS2 DLMFS 1.5.0 [ 59.749304] OCFS2 User DLM kernel interface loaded [ 65.347517] o2net: accepted connection from node ecu...

...crash is in xenolinux kernel. Also this crash is predictably reproducible. I am currently using xen 3.0.1, but I have seen the same thing happening in 3.0.2 some time back. If time permits I can try to reproduce it on latest Xen builds. The domU''s disks look like this: ''phy:/dev/etherd/e0.4,sda1,w'' ''phy:/dev/etherd/e1.4,sda2,w'' Inside the domU, sda1 is treated as root device and sda2 is treated as swap. The AOE setup involves, vblade servers running on the server machine that exports some disks over AOE. The dom0 instance in question is a client to t...

...1- 256MB on /boot; 2- 2GB on / for my dom0 (Debian 5.0) (eth0 default bridge for guests LAN); 3- 498GB exported with vblade-persist to my network (eth1 for the AoE protocol). On dom0 hypervisor01: vblade-persist setup 0 0 eth1 /dev/sda3 vblade-persist start all How to create a CVLM VG with /dev/etherd/e0.0 on each of my dom0s? Including the hypervisor01! I do not want to use GFS2/OCFS2 on top of CLVM, since I just want to provide live-motion. I''ll never try to setup two simultaneous domUs accessing the same CVLMs logical volumes. If someone can help me I will appreciate! This look...

...how_bug.cgi?format=multiple&id=662908 however it does not appear that the fix is available for public consumption (at least i couldn't find it). from the Eucalyptus nc.log: [Tue Jul 19 22:16:47 2011][005714][EUCAINFO ] doAttachVolume() invoked (id=i-4DA80924 vol=vol-59CF0630 remote=/dev/etherd/e0.12 local=/dev/sda2) [Tue Jul 19 22:16:48 2011][005714][EUCAERROR ] libvirt: Requested operation is not valid: Xm driver only supports modifying persistent config (code=55) [Tue Jul 19 22:16:48 2011][005714][EUCAERROR ] AttachVolume() failed (err=-1) XML= [Tue Jul 19 22:16:48 2011][005714][EUCAER...

In a prior message I documented my woes in getting an NFS_ROOT xen going. I haven''t resolved those yet, want to try a different tack at this: If the group were to recommend a path of least resistance to showing migration/live migration, which configuration would it be? Joe. _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com

...unformatted partitions * Node2: vblade 0 2 /dev/hda4 eth1 # The other # Or use vbladed but I don''t know how yet * modprobe aoe on each node * Install LVM on both nodes (in Dom0) * Create two volume groups on each node: Node1: vgcreate DomU1hda /dev/hda3 Node1: vgcreate DomU1hdb /dev/etherd/e0.2 # The AoE-exported device from the other node Node2: vgcreate DomU2hda /dev/hda4 Node2: vgcreate DomU1hdb /dev/etherd/e0.1 * Create logical volumes: Node1: lvcreate -n hda DomU1hda # Or do you create partitions here? lvcreate -n hda1? Node1: lvcreate -n hdb DomU1hdb Node2: lvcreate...

I''ve installed debian lenny amd64, it is frozen now. I''ve install kernel for xen support but it doesn''t start. It says "you need to load kernel first" but I''ve installed all the packages concerning xen, also packages related to the kernel. Perhaps lenny doesn''t support xen anymore? Any solution?

Hello, I''m getting many "Error getting mfn" on a xen4.1.3 with dom0 3.4.11 x86_32. I thought it could be related to xen/mmu: Release just the MFN list, not MFN list and part of pagetables. http://git.kernel.org/?p=linux/kernel/git/konrad/xen.git;a=commit;h=785f62314984ea3af9dd830b020289ba2509ae69 (XEN) Freed 212kB init memory. (XEN) mm.c:908:d0 Error getting mfn 2009b (pfn