search for: eth0s

Hello, all. When I execute arp -a -n, there are lots of arp caches like below. Surely, I set netmask and Broadcast without problem and routing table also no problem. System is CentOS release 4.7 i386. I know how to delete the arp cache, but I don't know why .. # ifconfig eth0 Link encap:Ethernet HWaddr 00:A0:D1:E7:91:CC inet addr:192.168.195.36

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hello! I have a problem with a duplicate route entry, when using a pre-installed route and automatic take-over by the "heartbeat" daemon, which adds an address and the kernel adds an route automatically. Maybe anyone has an explanation... > ip addr 1: lo: <LOOPBACK,UP> mtu 16436 qdisc noqueue inet 127.0.0.1/8 scope host lo

Hi all. I have a bridge running Linux 2.4.24 that I use as a bandwidth manager on a broadband wireless network. I''m using HTB and SFQ to prioritize that share bandwidth on a per-cell basis. My IP tables rules divide the traffic based on IPand traffic type (using layer-7 filter and ipp2p). My goal is to make sure that p2p traffic on the network doesn''t sink all of the

hi all i m connecting to my samba server from a windows xp client. whenever i started my firewall script the client used to take 4 minutes to connect to the samba server and i run IRIS (sniffer) on my windows xp box it captures a packet as shown below ------------------------------------------------------------------------------------------------------------------------------------- OPTIONS /

Hi, complete newb and I apologise for it. I have a setup where my linux box has multiple broadband connection where I am routing certain things over certain interfaces, currently 2 links eth2 is a 1500/256 and eth3 is a 512/512, eth0 is the link to the LAN for users. What I am trying to do is traffic shape the information going out eth0 to the local users by the interface the traffic arrived

Hi all, I need to (quickly!grrr) update IP addresses for which a given machine will answer. I did this: /sbin/ifconfig eth0:0 xx.xx.xx.10 netmask 255.255.255.0 /sbin/ifconfig eth0:1 xx.xx.xx.11 netmask 255.255.255.0 /sbin/ifconfig eth0:2 xx.xx.xx.30 netmask 255.255.255.0 /sbin/ifconfig eth0:3 xx.xx.xx.31 netmask 255.255.255.0 /sbin/ifconfig eth0:4 xx.xx.xx.13 netmask 255.255.255.0

Hi I''m doing traffic shaping with tc on ''10.0.0.0/30'' and ''10.0.0.28/30''. I want to delete part of shaping rules on the fly. (see my configuration at the end of this mail) I wan''t to delete the shaping for ''10.0.0.0/30'' on the fly while still keeping the shaping for part ''10.0.0.28/30'' running. When I for

Hi, My apologies if this is a FAQ that I missed. This is my first attempt at setting up samba4. Following the howto instructions: kinit administrator seems to work fine. samba is latest git (alpha19). however the join fails (as below): [root at ads bin]# ./samba-tool domain join tribalnova.local DC -Uadministrator --realm=tribalnova.local -d4 GENSEC backend 'gssapi_spnego'

a previously rock solid reliable server of mine crashed last night, the server was still running but eth0, a Intel 82574L using the e1000e driver, went down. The server has a Supermicro X8DTE-F (dual Xeon X5650, yada yada). server is a drbd master, so that was the first thing to notice network issues. Just a couple days ago I ran yum update to the latest, I do this about once a month.

Hello! I have an internet connection of 64kbps garanteed in a channel of 256kbps. On this connection the metropolitan speed is 10Mbps and in the provider''s network the speed is 100Mbps. I have a few clients behind my linux box and i want to set up some limitations because some of them are using it irrational. I am marking the packets with 0 for internet; 1 for metropolitan 2 for

Hello, Is routing within the same network possible? If it is, what configuration should I put for the firewall/router shown below? I basically want the host debian13 to be able to send packets via a multi-homed firewall. I think the multi-homed firewall involve some routing. +-------------------+ |debian13 | |eth0:192.168.0.13 | +-------------------+ |eth0 |

Hello, I have a problem which is that some of my VMs are loosing there IP addresses from time to time. What I saw in the log is when this VM loose its IP address there are DHCPREQUEST send from the VM by dhclient and the server responded only 50 minutes later ! Any help, advise on how to debug would be welcome. Thanks in advance Patrick Here after is an extract from the log July 1st 2016,

hi if i remove the rule for transparent redirection from my firewall script then it works well. what can be the connection of transparent redirection with samba please help me out. i m in a grate trouble. the detailed problem is below Regards Azeem >From: "azeem ahmad" <azeem484@hotmail.com> >To: samba@lists.samba.org >Subject: [Samba] iptables and samba >Date:

Hi, I´m shaping traffic using htb on both interfaces, I noticed that shaping download traffic is workinggreat but shaping upload traffic is not working at all (no sent packets, no dropped, no overlimits)I have eth0 facing the backbone and eth1 facing the LAN. Thanks for your help.These are the commands I run:tc qdisc del dev eth0 root tc qdisc add dev eth0 root handle 1 htb default 10 r2q 5 tc

Hello, I have a problem which is that some of my VMs are loosing there IP addresses from time to time. What I saw in the log is when this VM loose its IP address there are DHCPREQUEST send from the VM by dhclient and the server responded only 50 minutes later ! Any help, advise on how to debug would be welcome. Thanks in advance Patrick Here after is an extract from the log July 1st 2016,

Hello, I have a problem which is that some of my VMs are loosing there IP addresses from time to time. What I saw in the log is when this VM loose its IP address there are DHCPREQUEST send from the VM by dhclient and the server responded only 50 minutes later ! Any help, advise on how to debug would be welcome. Thanks in advance Patrick Here after is an extract from the log July 1st 2016,

Hello, I have a problem which is that some of my VMs are loosing there IP addresses from time to time. What I saw in the log is when this VM loose its IP address there are DHCPREQUEST send from the VM by dhclient and the server responded only 50 minutes later ! Any help, advise on how to debug would be welcome. Thanks in advance Patrick Here after is an extract from the log July 1st 2016,

Hi Stef, Sorry to write to you directly but my list membership is not working, I receive the archive but cant send to the list, cant delete myself because I don''t exist and can''t rejoin as they say I do exist, anyway hope you don''t mind Can you tell me what the difference between these two scripts is please. What I want to achieve is a high speed channel 1000kbit from

I have some problem with traffic shaping on debian testing. I actually posted a full config on the list a while ago but didn''t get any answers. The problem is that traffic doesn''t get into the user classes (~150) when I associate a class with a qdisc. I tried sfq, fifo but none works. If I dont''t associate a qdisc with a class classification occurs well.

Hi! Maybe, I found a bug of xen. My system: - domain0 - gentoo - xen-devel-3.0, kernel 2.6.12.5-r1 - domain1 - debian - kernel 2.6.12.5-r1 (2 interface: vif1.1 = eth0 (0.0.0.0), vif1.2 = eth1 (10.0.1.1 + gw 10.0.1.2)) Bridge: xen-br0 (config as 10.0.1.2) include (vif1.2, vif0.0) xen-br1 (config as 0.0.0.0) include (vif1.1, peth0) On server domain1 I use a pppoe server. If a send a pppoe request