search for: establishing

Hello everybody, I have a running an installation of Samba4 as AD. All is working fine, but when I start the firewall, the clients have problems to login. By my firewall-rules from the past, I had opened the ports 137:139 and 445 for samba and new for bind the port 53. The clients (WinXP) seems to have problems to read and write from/to the home directories. Maybe samba4 need additional or

Hi all, I''m new to shorewall and have been struggling with several problems for several days now. Most of them are solved, but one still persists. The firewall is running on my server under Debian Sarge (Kernel 2.6) I''ve got three network interfaces: ppp0 (DSL Internet) eth1 (lan) ath0 (wlan) eth1 and ath0 are bridged together to br0. The problem is, that Samba (also running

Hi, I've been able to get tinc setup when I flush all my iptables, but after enabling iptables and a delay I get a "Destination Net Unknown". I have three host (HOME10.0.3.2, MASTER 10.0.3.1, WEB 10.0.3.3) MASTER and WEB are in Digital ocean in the same data centre. HOME <---> MASTER <---> WEB I've tried multiple forwarding/masquerading/etc rules and

I have 2 ISDN BRI boxes, each with 4 spans, where the first one is configured as CPE, the second one as NET(so I don't need real lines for developing and testing). Once in a while I do see the following libpri error messages simultaneously on both boxes: PRI Span: 1 TEI=0 MDL-ERROR (A): Got supervisory frame with F=1 in state 7(Multi-frame established) PRI Span: 2 TEI=0 MDL-ERROR (A): Got

Can you post your Tinc configuration too? El lun., 30 ene. 2017 a las 11:42, Dave Albert (<dave.albert at gmail.com>) escribió: > Here is an extract of my current iptables that are not working: > > iptables -L -n -v > > Chain INPUT (policy DROP 8 packets, 1120 bytes) > pkts bytes target prot opt in out source > destination > 0 0

Hi community, i have a samba server that work's great, but my friends of IT security said that is vulnerable without a firewall,  i try to set an iptables firewall using the official documentation but is not working (obviously), this ti my config: #!/bin/sh echo n Aplicando Reglas de Firewall... ## FLUSH de reglas iptables -F iptables -X iptables -Z iptables -t nat -F ## Establecemos

Hi, We recently installed CentOS 6.2 on our cluster. During the installation/debugging of various secondary software, we had disabled iptables. When we re-enabled them, we found that the front-end would no longer X11 forward (although it does so when the iptables are off). What do we need to set in the iptables to permit X11 forwarding? Currently we're using iptables -P INPUT DROP

Hi security@ list, In my self written, large ipfw rule set, I had something that passed http to allow me to browse most but not all remote sites. For years I assumed the few sites I had difficulty with were cases pppoed MTU != 1500, from not having installed tcpmssd on my 4.*-RELEASE, but then running 6.1-RELEASE I realised that wasn't the problem. http://www.web.de Still failed, &

Hi All, I've a BT Versatility PBX that I want to connect to my asterisk 11.9.0 box via BRI port in NT mode but actually I wasn't able to get it working. I've another standalone PBX, it's a Panasonic model, which works fine connected to the same port. The BT connected to a UK BT BRI line works quite fine after roughly a minute once connected. The PBX can be seen at

Hi, Summary of my problem: Remote X forwarding is apperently randomly impossible for different display numbers. At the end of this mail you will find a recipe for how to reproduce this behaviour easily. I use SuSE 10.2 with the following openssh version: OpenSSH_4.4p1, OpenSSL 0.9.8d 28 Sep 2006 Clients (Linux and Windows (Cygwin)) connect to the server with X-Forwarding enabled

Hi, all. I set up a dht system, and sent a HUP signal to client to trigger the reconfiguration. But i found that the TCP connection established increased by the number of bricks(the number of glusterfsd progress). $ ps -ef | grep glusterfs root 8579 1 0 11:28 ? 00:00:00 glusterfsd -f /home/huz/dht/server.vol -l /home/huz/dht/server.log -L TRACE root 8583 1 0 11:28 ?

It has been some posting about this issue, but I cant find a solution I can't log on to my ldap server port 389 with my browser. service seems to be running. I am not running selinux, port 389 are open on both client and server. Message from browser: Access to this port is disabled for security reasons. Added command (hint from earlier posting) and got this list # netstat -aptn | grep

Here is an extract of my current iptables that are not working: iptables -L -n -v Chain INPUT (policy DROP 8 packets, 1120 bytes) pkts bytes target prot opt in out source destination 0 0 ACCEPT tcp -- lo * 0.0.0.0/0 0.0.0.0/0 tcp dpt:3306 0 0 ACCEPT udp -- lo * 0.0.0.0/0 0.0.0.0/0 udp dpt:3306

Hi all, I''ve followed http://reductivelabs.com/trac/puppet/wiki/UsingMongrel for configuring my puppet with mongrel. Al seems to work fine, except that, after a reinstall of 40 nodes atone time, I got many kind of errors like: ------------------------------------------------------------------------- err: Could not request certificate: Certificate retrieval failed: .tmp file already

Hi, I remember back in the days, there was a neat trick to recover a lost root password, or more exactly, redefine a new password for root. 1. In the bootloader, boot the system with the 'init=/bin/bash' kernel argument. 2. Remount the root partition in read-write mode: # mount -o remount,rw / 3. Set the password for root: # passwd 4. Remount the root partition in read-only

Hi, I'm trying to configure nwfilter for KVM, but so far I haven't managed to figure out a working configuration. Network setup: The dom0 (Debian 7.1, kernel 3.2.46-1, libvirt 0.9.12) is connected via eth0, part of the external subnet 192.168.17.0/24, and has an additional subnet 192.168.128.160/28 routed to its main address 192.168.17.125. The host's subnet is configured as bridge

I am working to a CentOS 6 server with nonstandard iptables system without rule for ACCEPT ESTABLISHED connections. All tables and chains empty (flush by legacy custom script) so only filter/INPUT chain has rules (also fail2ban chain): Chain INPUT (policy ACCEPT) target prot opt source destination f2b-postfix tcp -- 0.0.0.0/0 0.0.0.0/0 ACCEPT all --

Hello,? I hope that I can ask some questions on this mailing list about IPTables. I am more familiar with IPTABLES instead of FIREWALLD.? I disabled FIREWALLD and installed?iptables-services. I have put together a script that I found on the web on how to set up a good set of IPTABLES rules to keep my server as secure as possible. I have two NICs. ETH0 and ETH1. ETHO is the internet and ETH1 is my

Hi Samba Team, Have recently followed Samba guide and successfully migrate from PDC to AD and from BDC to join AD forest. Need some advice here as I encountered global catalog (GC) cannot be contacted issue when using RSAT. This message pops up when I click "member of" tab while viewing user properties although it will display correctly after I acknowledged the error. Another similar

This was due to a ProxyRequests On Let this be a lesson to all. [root at localhost log]# cat /proc/net/ip_conntrack | wc -l 11042 [root at localhost log]# cat /proc/sys/net/ipv4/ip_conntrack_max 28632 [root at localhost log]# cat /var/log/messages ... Sep 2 04:04:30 localhost kernel: printk: 213 messages suppressed. Sep 2 04:04:30 localhost kernel: ip_conntrack: table full, dropping