Displaying 16 results from an estimated 16 matches for "enp7s0f0".
Did you mean:
enp4s0f0
2015 Jul 09
1
Bond & Team: RX dropped packets
...eselect always)
Currently Active Slave: enp6s0
MII Status: up
MII Polling Interval (ms): 100
Up Delay (ms): 600000
Down Delay (ms): 0
Slave Interface: enp6s0
MII Status: up
Speed: 10000 Mbps
Duplex: full
Link Failure Count: 0
Permanent HW addr: 00:1b:21:91:aa:c5
Slave queue ID: 0
Slave Interface: enp7s0f0
MII Status: up
Speed: 1000 Mbps
Duplex: full
Link Failure Count: 0
Permanent HW addr: 00:25:90:1a:2d:aa
Slave queue ID: 0
[root at dc106 ~]# cat /etc/sysconfig/network-scripts/ifcfg-bond0
DEVICE=bond0
IPADDR=193.109.172.106
NETMASK=255.255.255.128
USERCTL=no
BOOTPROTO=none
ONBOOT=yes
MTU=9000
IPV6...
2017 Oct 26
2
Re: Need to increase the rx and tx buffer size of my interface
...Btw I changed vepa to bridged mode hoping it
> would help me. Also note that I tried the following without any driver name
> and it still failed.
>
>
> <interface type='direct'>
> <mac address='52:54:00:72:f9:eb'/>
> <source dev='enp7s0f0' mode='bridge'/>
> <model type='virtio'/>
> <driver name='qemu' queues='5' rx_queue_size='512'>
> <host csum='off' gso='off' tso4='off' tso6='off' ecn='off'
> ufo=...
2017 Oct 25
2
Need to increase the rx and tx buffer size of my interface
...ters: Operation not permitted
I have kept the VM xml files as specified in the link :
https://libvirt.org/formatdomain.html. The value that I kept in my xml file
is as follows.
<interface type='direct'>
<mac address='52:54:00:72:f9:eb'/>
<source dev='enp7s0f0' mode='vepa'/>
<model type='virtio'/>
<driver name='vhost' queues='5' rx_queue_size='512'
tx_queue_size='512'>
<host csum='off' gso='off' tso4='off' tso6='off' ecn='off' u...
2017 Oct 25
2
Re: Need to increase the rx and tx buffer size of my interface
...pecified in the link :
> > https://libvirt.org/formatdomain.html. The value that I kept in my xml
> file
> > is as follows.
> >
> > <interface type='direct'>
> > <mac address='52:54:00:72:f9:eb'/>
> > <source dev='enp7s0f0' mode='vepa'/>
> > <model type='virtio'/>
> > <driver name='vhost' queues='5' rx_queue_size='512'
> > tx_queue_size='512'>
> > <host csum='off' gso='off' tso4='off'...
2017 Oct 26
2
Re: Need to increase the rx and tx buffer size of my interface
...t;> > is as follows.
>>>>>>>> >
>>>>>>>> > <interface type='direct'>
>>>>>>>> > <mac address='52:54:00:72:f9:eb'/>
>>>>>>>> > <source dev='enp7s0f0' mode='vepa'/>
>>>>>>>> > <model type='virtio'/>
>>>>>>>> > <driver name='vhost' queues='5' rx_queue_size='512'
>>>>>>>> > tx_queue_size='512'...
2017 Oct 25
0
Re: Need to increase the rx and tx buffer size of my interface
...I have kept the VM xml files as specified in the link :
> https://libvirt.org/formatdomain.html. The value that I kept in my xml file
> is as follows.
>
> <interface type='direct'>
> <mac address='52:54:00:72:f9:eb'/>
> <source dev='enp7s0f0' mode='vepa'/>
> <model type='virtio'/>
> <driver name='vhost' queues='5' rx_queue_size='512'
> tx_queue_size='512'>
> <host csum='off' gso='off' tso4='off' tso6='off'...
2017 Oct 26
0
Re: Need to increase the rx and tx buffer size of my interface
...gt; it
> > would help me. Also note that I tried the following without any driver
> name
> > and it still failed.
> >
> >
> > <interface type='direct'>
> > <mac address='52:54:00:72:f9:eb'/>
> > <source dev='enp7s0f0' mode='bridge'/>
> > <model type='virtio'/>
> > <driver name='qemu' queues='5' rx_queue_size='512'>
> > <host csum='off' gso='off' tso4='off' tso6='off' ecn='off...
2019 Sep 20
0
7.7.1908, interface bonding, and default route
...1"
UUID=4ccacb42-dfad-484f-8168-b78c70a66c8d
DEVICE=nm-bond
ONBOOT=yes
IPV6_AUTOCONF=yes
IPV6_DEFROUTE=yes
IPV6_FAILURE_FATAL=no
IPV6_ADDR_GEN_MODE=stable-privacy
#Channel Interface example
TYPE=Ethernet
NAME="Ethernet connection 1"
UUID=5a961074-d502-49a3-ae3b-b6850a990e86
DEVICE=enp7s0f0
ONBOOT=yes
MASTER=nm-bond
SLAVE=yes
MASTER_UUID=4ccacb42-dfad-484f-8168-b78c70a66c8d
> Thanks,
> Carlos.
> _______________________________________________
> CentOS mailing list
> CentOS at centos.org
> https://lists.centos.org/mailman/listinfo/centos
--
Giles Coochey
2017 Oct 26
1
Re: Need to increase the rx and tx buffer size of my interface
...me. Also note that I tried the following without any driver
>> name
>> > and it still failed.
>> >
>> >
>> > <interface type='direct'>
>> > <mac address='52:54:00:72:f9:eb'/>
>> > <source dev='enp7s0f0' mode='bridge'/>
>> > <model type='virtio'/>
>> > <driver name='qemu' queues='5' rx_queue_size='512'>
>> > <host csum='off' gso='off' tso4='off' tso6='off' ec...
2016 Aug 17
0
Anaconda error on centos 7.2
...proto=dhcp --device=enp4s0f0 --onboot=yes --ipv6=auto
#network --bootproto=dhcp --device=enp4s0f1 --onboot=yes --ipv6=auto
#network --bootproto=dhcp --device=enp4s0f2 --onboot=yes --ipv6=auto
#network --bootproto=dhcp --device=enp4s0f3 --onboot=yes --ipv6=auto
#network --bootproto=dhcp --device=enp7s0f0 --onboot=yes --ipv6=auto
#network --bootproto=dhcp --device=enp7s0f1 --onboot=yes --ipv6=auto
#network --hostname=localhost.localdomain
# Reboot after installation
reboot
# Root password
#rootpw --iscrypted
$6$1VdyMsGywTam2QoF$h9G0RZJlZ8etF8LMvjT8LBuYoRkWfP3nXSP8UrNtW6gV/gHCjdUbnMDca.St2NVftNz5rJ...
2017 Oct 25
0
Re: Need to increase the rx and tx buffer size of my interface
...gt; > https://libvirt.org/formatdomain.html. The value that I kept in my xml
>> file
>> > is as follows.
>> >
>> > <interface type='direct'>
>> > <mac address='52:54:00:72:f9:eb'/>
>> > <source dev='enp7s0f0' mode='vepa'/>
>> > <model type='virtio'/>
>> > <driver name='vhost' queues='5' rx_queue_size='512'
>> > tx_queue_size='512'>
>> > <host csum='off' gso='off' t...
2019 Sep 20
2
7.7.1908, interface bonding, and default route
Hi!
I just upgraded a machine to 7.7.1908 and the default route is not being
set on boot. This particular server has a bonded interface, and the
corresponding configuration for the master is (
/etc/sysconfig/network-scripts/ifcfg-bond0):
TYPE=Bond
BOOTPROTO=none
DEFROUTE=yes
IPV4_FAILURE_FATAL=yes
NAME=bond0
DEVICE=bond0
ONBOOT=yes
IPADDR=10.3.20.131
PREFIX=24
2017 Oct 26
0
Re: Need to increase the rx and tx buffer size of my interface
...ent
for the following xml config? Btw I changed vepa to bridged mode hoping it
would help me. Also note that I tried the following without any driver name
and it still failed.
<interface type='direct'>
<mac address='52:54:00:72:f9:eb'/>
<source dev='enp7s0f0' mode='bridge'/>
<model type='virtio'/>
<driver name='qemu' queues='5' rx_queue_size='512'>
<host csum='off' gso='off' tso4='off' tso6='off' ecn='off'
ufo='off' mrg_rxbu...
2017 Oct 26
5
Re: Need to increase the rx and tx buffer size of my interface
....org/formatdomain.html. The value that I kept in my
>>> xml file
>>> > is as follows.
>>> >
>>> > <interface type='direct'>
>>> > <mac address='52:54:00:72:f9:eb'/>
>>> > <source dev='enp7s0f0' mode='vepa'/>
>>> > <model type='virtio'/>
>>> > <driver name='vhost' queues='5' rx_queue_size='512'
>>> > tx_queue_size='512'>
>>> > <host csum='off' gso...
2017 Oct 26
0
Re: Need to increase the rx and tx buffer size of my interface
...The value that I kept in my
>>>> xml file
>>>> > is as follows.
>>>> >
>>>> > <interface type='direct'>
>>>> > <mac address='52:54:00:72:f9:eb'/>
>>>> > <source dev='enp7s0f0' mode='vepa'/>
>>>> > <model type='virtio'/>
>>>> > <driver name='vhost' queues='5' rx_queue_size='512'
>>>> > tx_queue_size='512'>
>>>> > <host csum=&...
2017 Oct 26
0
Re: Need to increase the rx and tx buffer size of my interface
...t;>>>>> > is as follows.
>>>>>>> >
>>>>>>> > <interface type='direct'>
>>>>>>> > <mac address='52:54:00:72:f9:eb'/>
>>>>>>> > <source dev='enp7s0f0' mode='vepa'/>
>>>>>>> > <model type='virtio'/>
>>>>>>> > <driver name='vhost' queues='5' rx_queue_size='512'
>>>>>>> > tx_queue_size='512'>
>>...