Displaying 8 results from an estimated 8 matches for "enp4s0f1".
Did you mean:
enp4s0f0
2018 Feb 01
2
Upgrading a ctdb cluster: samba not listening on TCP port 445
...ing on the port.
Thanks,
Nicolas
samba.log:
[2018/02/01 12:42:52.524438, 2] ../source3/lib/interface.c:345(add_interface)
added interface eno1 ip=172.1.1.4 bcast=172.1.255.255 netmask=255.255.0.0
[2018/02/01 12:42:52.524477, 2] ../source3/lib/interface.c:345(add_interface)
added interface enp4s0f1 ip=172.16.1.4 bcast=172.16.255.255 netmask=255.255.0.0
[2018/02/01 12:42:52.524493, 2] ../source3/lib/interface.c:345(add_interface)
added interface enp4s0f1 ip=172.16.1.55 bcast=172.16.255.255 netmask=255.255.0.0
[2018/02/01 12:42:52.524506, 2] ../source3/lib/interface.c:345(add_interface)...
2018 Feb 01
2
Upgrading a ctdb cluster: samba not listening on TCP port 445
Hi all,
I try to update two clustered samba file servers. Right now samba 4.7.0
with ctdb is running on both of them. To update samba I stopped ctdb on
one of the servers, and compiled and installed samba 4.7.1 with:
./configure --with-cluster-support --with-shared-modules=idmap_tdb2,idmap_ad,vfs_glusterfs --with-systemd
Trying to start ctdb on the updated server fails with "
2020 Apr 28
3
Diagnosing IPv6 routing
I just got 50 Mbps symmetric fiber from AT&T and it includes a /56 of IPv6
addresses, replacing a much slower ADSL line. I never tried to get IPv6
working on the old connection. I'm using CentOS 7 as a gateway and it's
worked great for several versions for IPv4.
I'm not seeing any IPv6 default route on the WAN interface. I suspect I'm
not getting route announcements. I
2016 Mar 29
2
Network bond - one port goes down from time to time
...IT=no
NAME=bond0
DEVICE=bond0
ONBOOT=yes
TYPE="Ethernet"
MASTER=bond0
SLAVE=yes
NAME="enp4s0f0"
UUID="xxx"
DEVICE="enp4s0f0"
ONBOOT="yes"
TYPE="Ethernet"
MASTER=bond0
SLAVE=yes
NAME="enp4s0f0"
UUID="xxx"
DEVICE="enp4s0f1"
ONBOOT="yes"
/G?tz
2020 May 13
2
Multi-homed Samba 4 file server on Samba 4 AD domain - cross network authentication
...iface ens4f1 inet manual
address 192.168.84.74
netmask 255.255.255.0
mtu 9014
# 10 Gigabit Port 5
allow-hotplug enp4s0f0
auto enp4s0f0
iface enp4s0f0 inet manual
address 192.168.84.75
netmask 255.255.255.0
mtu 9014
# 10 Gigabit Port 6
allow-hotplug enp4s0f1
auto enp4s0f1
iface enp4s0f1 inet manual
address 192.168.84.76
netmask 255.255.255.0
mtu 9014
# 1 Gig Bridge (normal network)
auto vmbr0
iface vmbr0 inet static
address 192.168.42.70
netmask 255.255.255.0
network 192.168.42.0
broadcast 192.168.42.255...
2016 Mar 29
0
Network bond - one port goes down from time to time
...uot;
> MASTER=bond0
> SLAVE=yes
> NAME="enp4s0f0"
> UUID="xxx"
> DEVICE="enp4s0f0"
> ONBOOT="yes"
>
> TYPE="Ethernet"
> MASTER=bond0
> SLAVE=yes
> NAME="enp4s0f0"
> UUID="xxx"
> DEVICE="enp4s0f1"
> ONBOOT="yes"
should both those 'ethernet' devices have the same NAME ?
--
john r pierce, recycling bits in santa cruz
2016 Aug 17
0
Anaconda error on centos 7.2
...timezone
timezone America/Los_Angeles
# Network information
#network --bootproto=dhcp --device=eno1 --onboot=yes --ipv6=auto
#network --bootproto=dhcp --device=eno2 --onboot=yes --ipv6=auto
#network --bootproto=dhcp --device=enp4s0f0 --onboot=yes --ipv6=auto
#network --bootproto=dhcp --device=enp4s0f1 --onboot=yes --ipv6=auto
#network --bootproto=dhcp --device=enp4s0f2 --onboot=yes --ipv6=auto
#network --bootproto=dhcp --device=enp4s0f3 --onboot=yes --ipv6=auto
#network --bootproto=dhcp --device=enp7s0f0 --onboot=yes --ipv6=auto
#network --bootproto=dhcp --device=enp7s0f1 --onboot=yes --ipv6...
2016 Mar 28
4
Network bond - one port goes down from time to time
Hi,
may be someone has an idea:
We have three supermicron servers with two 10Gb Ports each, connected to a cisco switch stack 1Gb ports. All are on auto speed.
I configured a LACP bond on both sides on all servers, first with citrix xen server.
On one server eth0 goes down from time to time ? maybe within minutes, someday it is up for some hours.
Two server are fine; the bond is up for 24