search for: enp0s3

...tputs: 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: enp0s3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether 08:00:27:bc:e1:67 brd ff:ff:ff:ff:ff:ff (2) The content of ifcfg-enp0s3: TYPE="Ethernet" BOOTPROTO="dhcp" DEFROUTE="yes" PEERDNS="yes" PEERROUTES="yes&q...

Hi, I'd want to configure persistent static routes, ie in config files, but I can't configure static routes, I tested: [root at centos7 ~]# cat /etc/sysconfig/network-scripts/routes-enp0s3 ADDRESS0=10.10.10.0 NETMASK0=255.255.255.0 GATEWAY0=192.168.1.1 logs says nothing: ago 27 15:38:29 centos7.vhgroup.corp NetworkManager[2299]: <info> Activation (enp0s3) Stage 5 of 5 (IPv4 Commit) complete. ago 27 15:38:29 centos7.vhgroup.corp NetworkManager[2299]: <info> (enp0s3): dev...

Hi, I've created a bridge using 2 interfaces and have a lot of messages as follows: nov 12 15:30:22 localhost kernel: br0: received packet on enp0s3 with own address as source address nov 12 15:30:22 localhost kernel: br0: received packet on enp0s3 with own address as source address And the operating systems is extremely slow Interfaces files : [root at localhost ~]# cat /etc/sysconfig/network-scripts/ifcfg-* DEVICE=br0 TYPE=Bridge BOOTPROTO...

...]*, the routing tables for tables t2 and t3 appeared incomplete. The route specified in the route files for network 192.168.1.0/24 was missing - most likely cause it was already in the main routing table. Only the default route appeared in the tables $ cat /etc/sysconfig/network-scripts/route-enp0s3 192.168.1.0/24 dev enp0s3 src 192.168.1.12 table t2 default via 192.168.1.1 dev enp0s3 table t2 $ cat /etc/sysconfig/network-scripts/route-enp0s8 192.168.1.0/24 dev enp0s8 src 192.168.1.13 table t3 default via 192.168.1.1 dev enp0s8 table t3 $ ip r l t t2 default via 192.168.1.1 dev enp0s3 $ ip...

drbd ctdb ocfs2 Hi Everything seems OK apart from the IP takeover. public_addresses 192.168.1.80/24 enp0s3 192.168.1.81/24 enp0s3 ctdb status Number of nodes:2 pnn:0 192.168.1.10 PARTIALLYONLINE pnn:1 192.168.1.11 PARTIALLYONLINE (THIS NODE) Generation:2090727463 Size:2 hash:0 lmaster:0 hash:1 lmaster:1 Recovery mode:NORMAL (0) Recovery master:1 but we are getting: 2014/07/11 18:17:37.313940 [...

2015-11-12 15:56 GMT-03:00 Ulf Volmer <u.volmer at u-v.de>: > On 11/12/2015 07:42 PM, Sergio Belkin wrote: > > I've created a bridge using 2 interfaces and have a lot of messages as >> follows: >> >> nov 12 15:30:22 localhost kernel: br0: received packet on enp0s3 with own >> address as source address >> nov 12 15:30:22 localhost kernel: br0: received packet on enp0s3 with own >> address as source address >> > > sounds like a loop. > > What says 'brctl show'? > When I enable stp: [root at localhost ~]# brctl...

Hi! I installed CentOS 7 today, it's a minimal install, so it didn't have ifconfig command. So I installed net-tools, however I can't add ipv6 address to it. # ifconfig enp0s3 add fc00::1002/124 SIOCSIFADDR: Permission denied. Yes, I'm running as root. CentOS is running in a Qemu instance with e1000 ethernet card.

> >> Who are you logged into the Windows PC as ? > > I log in az A\Administrator. I created an admin user, put in Domain > > Admins group, but the result was the same (ok, it would be strange, if > > it would work with it, instead of Administrator) > Then you need to ensure that 'Domain Admins' has the same privilege as > 'A\Administrator' Ok, I

2015-11-12 18:07 GMT-03:00 James A. Peltier <jpeltier at sfu.ca>: > ----- Original Message ----- > | Hi, > | > | I've created a bridge using 2 interfaces and have a lot of messages as > | follows: > | > | nov 12 15:30:22 localhost kernel: br0: received packet on enp0s3 with own > | address as source address > | nov 12 15:30:22 localhost kernel: br0: received packet on enp0s3 with own > | address as source address > | > | And the operating systems is extremely slow > | > | Interfaces files : > | > | [root at localhost ~]# cat /etc/syscon...

...OK on the Linux side but I cannot get any windows client to successfully join the domain. Each attempt returns the following error message "RPC Server in not available". Below are the config file info. I have searched the internet and cannot find any help that works. Thanks Paul ifcfg-enp0s3 ************************************************** TYPE=Ethernet BOOTPROTO=static IPADDR=192.168.42.241 DNS1=192.168.42.241 DEFROUTE=yes IPV4_FAILURE_FATAL=no IPV6INIT=yes IPV6_AUTOCONF=yes IPV6_DEFROUTE=yes IPV6_FAILURE_FATAL=no NAME=enp0s3 UUID=76058991-c999-4e20-a8cd-cea4da9a5be7 DEVICE=enp0s3 O...

On 08/09/2016 12:03 PM, John R Pierce wrote: > those are both the same network, and the default gateway is a global > thing. packets forwarded to 192.168.1.1 could use either 192.168.1.12 > or .13, as they are all the same. in reality, they will use the first > match they find. Generally, but not necessarily. What Birta is trying to accomplish is called

...P group default qlen 1000 > > link/ether 08:00:27:c9:09:60 brd ff:ff:ff:ff:ff:ff > > inet 10.0.3.15/24 brd 10.0.3.255 scope global dynamic enp0s8 > > valid_lft 83319sec preferred_lft 83319sec > > inet6 fe80::a00:27ff:fec9:960/64 scope link > > 3: enp0s3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc > pfifo_fast > > state UP group default qlen 1000 > > link/ether 08:00:27:60:df:a1 brd ff:ff:ff:ff:ff:ff > > inet 192.168.0.8/24 brd 192.168.0.255 scope global enp0s3 > > inet6 fe80::a00:27ff:fe60:dfa...

----- Original Message ----- | Hi, | | I've created a bridge using 2 interfaces and have a lot of messages as | follows: | | nov 12 15:30:22 localhost kernel: br0: received packet on enp0s3 with own | address as source address | nov 12 15:30:22 localhost kernel: br0: received packet on enp0s3 with own | address as source address | | And the operating systems is extremely slow | | Interfaces files : | | [root at localhost ~]# cat /etc/sysconfig/network-scripts/ifcfg-* | DEVICE=br0 |...

...r the dns domain, so you really do not need anything else controlling anything to do with dns. I tested joining a Ubuntu DC to a domain and I had to do this: apt install ifupdown apt purge nplan Edit /etc/network/interfaces # The loopback network interface auto lo iface lo inet loopback auto enp0s3 iface enp0s3 inet static ??????? address 192.168.0.243 <-- replace this with your DCS IP ??????? netmask 255.255.255.0 ??????? gateway 192.168.0.1 <-- replace this with your gateways IP Replace 'enp0s3' with your interface name. service systemd-resolved stop systemctl disable sys...

...CAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000 link/ether 08:00:27:c9:09:60 brd ff:ff:ff:ff:ff:ff inet 10.0.3.15/24 brd 10.0.3.255 scope global dynamic enp0s8 valid_lft 83319sec preferred_lft 83319sec inet6 fe80::a00:27ff:fec9:960/64 scope link 3: enp0s3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000 link/ether 08:00:27:60:df:a1 brd ff:ff:ff:ff:ff:ff inet 192.168.0.8/24 brd 192.168.0.255 scope global enp0s3 inet6 fe80::a00:27ff:fe60:dfa1/64 scope link ----------- Checking file:...

...3/05/2018 ? 16:36, Nux! a ?crit?: > Try "iptables -I INPUT" for your FTP rule. Doesn't work. I redirected all my errors to /var/log/messages, so here's what I get when I try to connect Filezilla to that server. May 23 16:48:58 c7-server kernel: +++ IPv4 packet rejected +++ IN=enp0s3 OUT= MAC=08:00:27:00:00:03:d4:85:64:b2:b2:1b:08:00 SRC=192.168.2.2 DST=192.168.2.12 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=30737 DF PROTO=TCP SPT=51474 DPT=38714 WINDOW=29200 RES=0x00 SYN URGP=0 I'm clueless here. -- Microlinux - Solutions informatiques durables 7, place de l'?glise - 30730...

...P group default qlen 1000 > > link/ether 08:00:27:c9:09:60 brd ff:ff:ff:ff:ff:ff > > inet 10.0.3.15/24 brd 10.0.3.255 scope global dynamic enp0s8 > > valid_lft 83319sec preferred_lft 83319sec > > inet6 fe80::a00:27ff:fec9:960/64 scope link > > 3: enp0s3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast > > state UP group default qlen 1000 > > link/ether 08:00:27:60:df:a1 brd ff:ff:ff:ff:ff:ff > > inet 192.168.0.8/24 brd 192.168.0.255 scope global enp0s3 > > inet6 fe80::a00:27ff:fe60:dfa1/64 s...

Hi, I hope someone can help me with the following problem. I followed the following guides to setup samba as an additional active directory server to my windows server with bind9 dns: https://www.tecmint.com/join-additio...r-replication/<https://www.tecmint.com/join-additional-ubuntu-dc-to-samba4-ad-dc-failover-replication/>

Hello, I am trying to upgrade our domain controller to 4.2.0 from 4.1.16, however samba will not start after the upgrade. It appears to be related to the fact that this AD domain was created by running classicupgrade. My test environment, which was originally provisioned from 4.0 does not have this problem. This server was originally deployed back in 2004 using Samba3 and OpenLDAP. We upgraded

On 11/12/2015 07:42 PM, Sergio Belkin wrote: > I've created a bridge using 2 interfaces and have a lot of messages as > follows: > > nov 12 15:30:22 localhost kernel: br0: received packet on enp0s3 with own > address as source address > nov 12 15:30:22 localhost kernel: br0: received packet on enp0s3 with own > address as source address sounds like a loop. What says 'brctl show'? best regards Ulf