search for: endpoint_internal

...type=transport protocol=udp bind=0.0.0.0 local_net=172.31.32.0/20 ; In the following two lines, replace "<publicIP>" with the output of ; curl -s http://169.254.169.254/latest/meta-data/public-ipv4 external_media_address=<publicIP> external_signaling_address=<publicIP> [endpoint_internal](!) type=endpoint context=from-internal disallow=all allow=ulaw direct_media=no [auth_userpass](!) type=auth auth_type=userpass [aor_dynamic](!) type=aor max_contacts=1 remove_existing=yes ;Definitions for our phones, using the templates above ;; usernames and passwords etc. below My security...

...) using pjsip qualify demo-alice etc., after which the right IP addresses showed in pjsip show endpoints. Anyway, it works as expected now, I think. My pjsip.conf is now [transport-udp] type=transport protocol=udp bind=0.0.0.0 local_net=192.168.1.0/24 ;Templates for the necessary config sections [endpoint_internal](!) type=endpoint context=from-internal disallow=all allow=ulaw [auth_userpass](!) type=auth auth_type=userpass [aor_dynamic](!) type=aor max_contacts=1 remove_existing=yes ;Definitions for our phones, using the templates above [demo-alice](endpoint_internal) auth=demo-alice aors=demo-alice mail...

...transport protocol=udp bind=0.0.0.0 ;; for within EC2 local_net=172.31.32.0/20 ;; For softphones within EC2 local_net=192.168.1.0/24 external_media_address=<publicIPOfEC2Instance> external_signaling_address=<publicIPOfEC2Instance> ;Templates for the necessary config sections [endpoint_internal](!) type=endpoint context=from-internal disallow=all allow=!all,ulaw direct_media=no rtp_symmetric=yes On Thu, Mar 5, 2015 at 5:52 PM, Sonny Rajagopalan < sonny.rajagopalan at gmail.com> wrote: > Hello All, > > I have an Asterisk server v13.1.0 running on EC2 and I am able...

...e right IP addresses > showed in pjsip show endpoints. Anyway, it works as expected now, I > think. My pjsip.conf is now > > [transport-udp] > type=transport > protocol=udp > bind=0.0.0.0 > local_net=192.168.1.0/24 > ;Templates for the necessary config sections > > [endpoint_internal](!) > type=endpoint > context=from-internal > disallow=all > allow=ulaw > > [auth_userpass](!) > type=auth > auth_type=userpass > > [aor_dynamic](!) > type=aor > max_contacts=1 > remove_existing=yes > ;Definitions for our phones, using the templates above &...

I am following the instructions in https://wiki.asterisk.org/wiki/display/AST/Basic+PBX+Functionality and I am trying to make a call from extension Alice (6001) to extension for Bob (6002). When I make the call, I can hear the ringing on Alice's phone (caller), but Bob's phone (callee) doesn't ring, or show a call coming in from Alice. My setup and environment is as follows: Alice, Bob

This question was asked by Chirag on March 4 2015 earlier, but I am following exactly the same procedure here and I cannot even get my clients to register on Asterisk. Here's my PJSIP.conf: [transport-tcp] type=transport protocol=tcp bind=0.0.0.0:5061 ... [endpoint_internal](!) type=endpoint context=from-internal disallow=all allow=!all,ulaw direct_media=no rtp_symmetric=yes message_context=text-context [auth_userpass](!) type=auth auth_type=userpass [aor_dynamic](!) type=aor max_contacts=1 remove_existing=yes ;;; Configuration for user 99999999 ... I used basical...