search for: enbloc

...t;---pri---> legacy pbx everything is fine exept that when dialling from the legacy pbx it takes about 3 seconds before the asterisk start to dial. where does this delay come from? has it to do with 'overlapdial=yes'? here is an excerpt from the logfile (i assume the number is dialled enbloc as it come with the redial function of the legacy pbx): 2005-07-28 17:23:37 VERBOSE[13873] logger.c: -- Accepting overlap call from '070314161XXX' to '<unspecified>' on channel 0/1, span 2 2005-07-28 17:23:37 VERBOSE[13997] logger.c: -- Starting simple switch on ...

Dear All, I'm integrating avaya commuication manager difinity ver 1.0 with asterisk using B2B E1. following are the details of my H/W, zaptel configs and software installed. Digium TE110p asterisk 1.2.19 cent OS 4.4 zaptel 1.2.18 libpri 1.2.4 etc/zaptel.conf span=1,0,0,cas,hdb3 bchan=1-15,17-31 dchan=16 when i ztcfg -vvv im having this error message and the E1 is not getting up. "cas

...determines which extensions *cannot* access this trunk, I am using a COR that permits all Mitel extensions to access the Sip trunk and therefore call Asterisk users successfully) - enter any required digits in Digits Before Outpulsing. (If this field is left blank, digits will be sent out as "Enbloc".) Route number = 10 Routing medium = SIP Trunk Trunk group number = empty SIP Peer profile = Asterisk Route Type = PSTN access via DPNSS - ARS Digits dialed Assignment: Digits Dialed = 2 (2 is the first digit of my Asterisk extensions Numbers to follow = 3 (5xx follow = 3 digits) Terminatio...

The originating PRI system passes the entire dialed number in the d-channel setup frame, thus the concept of a wait time for additional digits is meaningless. Progressive digit gathering implies that the signalling is occuring 'in-band' as would be the case with DTMF signalling on analog lines. You need to look in the Ascom and find the configuration table that lays out the dialplan for