Displaying 4 results from an estimated 4 matches for "em_wink".
2007 Nov 02
2
Route an incoming call by ANI*DNIS
does anyone know how to route a call coming in with ANI*DNIS*
Oct 31 12:47:41 VERBOSE[30056] logger.c: -- Executing
Set("Zap/49-1", "DID=1231234*4812*") in new stack
I tried making a route for _.*4812* but that matched everything rather
then just the dnis i wanted.. any ideas?
I would preferably like pass the callerid along to my extensions, but
for now the important
2009 Feb 16
1
DTMF not completely muted
...ne. This shows up in recorded
voicemail greetings -- you hear a very short DTMF '#', or sometimes two blips,
at the end of the recording.
I have a Mitel SX-200 connected to Asterisk 1.6.0.1 by a couple of Digium cards:
a TE420 w/Octasic and pri_net signalling, and a TE220 w/o Octasic using em_wink
signalling. Calls come in using either PRI or E&M depending on Mitel routing
(you don't want to know...).
Either way, the driver is doing software DTMF detection. (Looking through the
DAHDI driver, hardware DTMF detection is always disabled by default.)
The calls are then sent to another...
2009 Nov 11
2
Bug or feature: SIP chanvars not overriden
Hello,
Using 1.6.2-rc5, my settings include:
[local-phone](!)
context=mylocal
type=friend
nat=no
canreinvite=no
host=dynamic
qualify=yes
dtmf=info
language=fr
call-limit=5
subscribecontext=subs
disallow=all
allow=alaw
t38pt_udptl=no
setvar=accountcode=foo
[168](local-phone)
defaultuser=168
secret=pass168
callerid=John Doe<168>
2005 Jul 08
3
McLeod Integrated T1 - no PRI?
Hello everyone,
We have recently turned up a new T1 from McLeod (Midwestern CLEC). It
is configured like so:
/etc/zaptel.conf:
loadzone=us
defaultzone=us
span=1,0,0,esf,b8zs ;(also tried 1,1,0,esf,b8zs)
bchan=13-23
nethdlc=1-12
dchan=24
/etc/zapata.conf:
switchtype=national
context=pri-in
signalling=pri_cpe
group=1
channel => 13-23
I can get hdlc0 (and pvc0) up just fine after the