search for: em3

...23 ... $ rrn : num 0.789 0.702 0.894 0.895 0.923 ... $ asym2: num 0.177 0.304 0.108 0.187 0.274 ... $ asym3: num 0.0755 0.0975 0.0818 0.0651 0.13 ... > str(rownames(op)) chr [1:37] "abov-belw" "ampl-rstr" "angl-rndd" "ascn-dscn" ... > str(em3) 'data.frame': 37 obs. of 9 variables: $ B--: int 4 1 12 14 0 3 2 15 3 5 ... $ P--: int 4 1 2 3 5 15 1 0 3 1 ... $ U--: int 10 16 4 1 13 0 15 3 12 12 ... $ --B: int 5 13 10 15 6 1 5 16 5 8 ... $ --P: int 6 2 5 2 12 16 5 0 13 10 ... $ --U: int 7 3 3 1 0 1 8 2 0 0 ... $ -...

...gured as slaves to BOND0 ifcfg-em1: TYPE=Ethernet USERSTL=no MASTER=bond0 NAME=em1 UUID=0ca45a64-70eb-4bfb-bf73-90b221d5fa65 DEVICE=em1 ONBOOT=yes SLAVE=yes ifcfg-em2: TYPE=Ethernet NAME=em2 UUID=d79cc76a-8f38-460c-9430-2ae78b43dc1d DEVICE=em2 ONBOOT=yes MASTER=bond0 USERCTL=no SLAVE=yes ifcfg-em3: TYPE=Ethernet NAME=em3 UUID=9f7cf127-eba2-45e8-95bd-814e6066aa74 DEVICE=em3 ONBOOT=yes MASTER=bond0 USERCTL=no SLAVE=yes ifcfg-em4 TYPE=Ethernet NAME=em4 UUID=53517fa5-9e22-4286-a367-8c91ef6f1883 DEVICE=em4 ONBOOT=yes MASTER=bond0 USERCTL=no SLAVE=yes ifcfg-bond0: DEVICE=bond0 NAME=bond0 TYPE=b...

...idge.bridge-nf-call-arptables = 0 /etc/sysconfig/network-scripts/ifcfg-em2 DEVICE=em2 NM_CONTROLLED=no BOOTPROTO=none HWADDR=... ONBOOT=yes HOTPLUG=no BRIDGE=br2 /etc/sysconfig/network-scripts/ifcfg-br2 DEVICE=br2 TYPE=Bridge BOOTPROTO=none ONBOOT=yes DELAY=0 /etc/sysconfig/network-scripts/ifcfg-em3 DEVICE=em3 NM_CONTROLLED=no BOOTPROTO=none HWADDR=... ONBOOT=yes HOTPLUG=no BRIDGE=br3 /etc/sysconfig/network-scripts/ifcfg-br3 DEVICE=br3 TYPE=Bridge BOOTPROTO=none ONBOOT=yes DELAY=0 On the host I connect to the network using a different nic ifcfg-em5. Which connects to the gateway server and t...

On CentOS 7 with firewalld I have a box with numerous interfaces acting as a NAT gateway. This works but I noticed that it routes/forwards traffic not just from my internal zone to external zone but also between interfaces within the internal zone. How can I prevent that traffic? I've tried adding direct and rich rules to deny the traffic but it doesn't work. Direct: firewall-cmd

...DEVICE=bond0 ONBOOT=yes IPADDR=10.3.20.131 PREFIX=24 GATEWAY=10.3.20.1 DNS1=10.3.2.8 BONDING_MASTER=yes BONDING_OPTS="mode=802.3ad xmit_hash_policy=layer2 miimon=100" The slaves (two of them) are configured like TYPE=Ethernet BOOTPROTO=none NAME=bond0-slave0 DEVICE=em3 ONBOOT=yes MASTER=bond0 SLAVE=yes After booting, the routing table is 10.3.20.0/24 dev bond0 proto kernel scope link src 10.3.20.131 metric 300 with no default route configured (manually adding it will work, of course.) This machine worked perfectly before, and it did during previous up...

Hello I have a virtual server with 3 existing VMs running on it without issue. The host has 4 NICs installed; em1 for the host, em2 and em3 already in use by other VMs. I would like to dedicate em4 to my new VM however when I create the bridge like I did for the others I do not get a vnet3 device show up in the list as shown below. I tried using the GUI and virsh to create the bridge. I ended up with this config: [root@cbcvm network-s...

...> mtu 1500 qdisc mq master bond0 state UP group default qlen 1000 link/ether d0:94:66:65:32:0e brd ff:ff:ff:ff:ff:ff 3: em2: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc mq master bond0 state UP group default qlen 1000 link/ether d0:94:66:65:32:10 brd ff:ff:ff:ff:ff:ff 4: em3: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc mq master bond0 state UP group default qlen 1000 link/ether d0:94:66:65:32:10 brd ff:ff:ff:ff:ff:ff 5: em4: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc mq master bond0 state UP group default qlen 1000 link/ether...

...t; GATEWAY=10.3.20.1 > DNS1=10.3.2.8 > BONDING_MASTER=yes > BONDING_OPTS="mode=802.3ad xmit_hash_policy=layer2 miimon=100" > > The slaves (two of them) are configured like > > TYPE=Ethernet > BOOTPROTO=none > NAME=bond0-slave0 > DEVICE=em3 > ONBOOT=yes > MASTER=bond0 > SLAVE=yes > > After booting, the routing table is > > 10.3.20.0/24 dev bond0 proto kernel scope link src 10.3.20.131 metric 300 > > with no default route configured (manually adding it will work, of course.) > > This machine...

...irewall services are currently disabled). Here's the current host configuration: # brctl show bridge name bridge id STP enabled interfaces br0 8000.38eaa792efe5 no em2 vnet1 br1 8000.38eaa792efe6 no em3 br2 8000.38eaa792efe7 no em4 vnet0 virbr0 8000.525400db3ebf yes virbr0-nic # more /etc/sysconfig/network-scripts/ifcfg-em2 TYPE=Ethernet BRIDGE="br0" NAME=em2 DEVICE="em2" UUID=aea...

...enabled pcib5: allocated I/O port range (0xc000-0xc01f) for rid 18 of pci0:5:0:0 map[1c]: type Memory, range 32, base 0xf7920000, size 14, enabled pcib5: allocated memory range (0xf7920000-0xf7923fff) for rid 1c of pci0:5:0:0 pcib5: matched entry for 5.0.INTA pcib5: slot 0 INTA hardwired to IRQ 16 em3: <Intel(R) PRO/1000 Network Connection 7.2.3> port 0xc000-0xc01f mem 0xf7900000-0xf791ffff,0xf7920000-0xf7923fff irq 16 at device 0.0 on pci5 em3: attempting to allocate 3 MSI-X vectors (5 supported) msi: routing MSI-X IRQ 259 to local APIC 0 vector 53 msi: routing MSI-X IRQ 260 to local APIC...

...ent of the NT Description field server string = %h #domain admin group = root #hosts allow = 192.168.188. 127. #socket address = 192.168.188.1 #interfaces = eth0 192.168.188.1 #interfaces = eth0 192.168.188.0/24 interfaces = lo bond0 #interfaces = lo bond0 em1 em2 em3 em4 #interfaces = 192.168.188.0/24 bind interfaces only = yes load printers = yes #printing = lprng #printcap name = /etc/printcap printcap name = cups printing = cups cups options = raw use client driver = Yes log file = /var/log/samba/samba.log ma...

I would also like to help as well. As KMacy knows before i asked a lot of questions for T2 types of servers but unfortunately i have no more access to those kind of hardware as well. I;m willing to participate if a team will be formated.