search for: ellentuch

Hi, Right now my UPS has "battery.charge.low" set to 30. I think thats pretty silly, I'd like it to be alot lower. Its a read only variable so I can't modify it. I can't find a setting in a conf file to override it. Did I miss it? Thanks, Tuc

Hi, After I do a : upscmd ellipse@localhost test.battery.start How do I tell its running, what the status is, etc. Thanks, Tuc

Hi, I'm running into an issue while using FreeBSD 5.4, NUT from ports (2.0.3), serial on /dev/cuaa1, Ellipse 1200 USBS. The ups.conf is : [ellipse] driver=mge-utalk port=/dev/cuaa1 desc="Telecom Closet Ellipse" When I go to start it I get : Network UPS Tools - UPS driver controller 2.0.3 Network UPS Tools - MGE UPS SYSTEMS/U-Talk driver 0.87 (2.0.3)

Hi, FINALLY got my UPS working, YEA!!!! But now it brings up even more issues.. (BOOO!!) 1) I'm thinking this is a UPS issue, but when I pull the plug on my UPS, it goes from 100 to 30 in just a short amount of time (Minutes). This causes the machine to shut down. But once it gets to 0, its beeped its little heart out for a few more HOURS providing power to the non-system items perfectly.

Hi, I took the advice of Daniel O'Connor, found out what variables I had available to me, and put them in the conf. So now it looks like : [ellipse] driver = mge-shut port = /dev/cuaa0 desc = "UPS" lowbatt = 5 offdelay = 120 let the UPS charge up fully, 24 hours. I plugged a single lamp into it, with a 60W bulb. At 3:40p

Hi, FreeBSD 5.4, NUT from ports (2.0.3), serial on /dev/cuaa1, Ellipse 1200 USBS. I set the ups.conf up as : [ellipse] driver=mge-utalk port=/dev/cuaa1 desc="Ellipse" When I go to start it I get : Network UPS Tools - UPS driver controller 2.0.3 Network UPS Tools - MGE UPS SYSTEMS/U-Talk driver 0.87 (2.0.3) Could not get multiplier table: using raw

Hi, Still running into serial issues on the mge-shut with the MGE Ellipse 1200 USBS. I had mge-utalk sort of talking to it, but was told to use mge-shut and get nothing out of it. This is at a remote site that I have to leave tomorrow so if I don't get it running I can't leave it in place. Help? Thanks, Tuc