search for: eepro100

...objective: boot a FreeBSD-package over the network by Systems lacking HW-Support for PXE My Testconfiguration: Server IBM-PC300 Client Siemes Fujitsu ErgoPro with freeBSD6.0 installed Network card in client intel82558, which I believe to be sufficiently equal with 82559er (hence covered by eepro100) when producing the boot-floppy Status achieved: # Bootfloppy on ErgoPro boots Etherboot # Etherboot loads pxelinux.0 # Pxelinux loads pxe.cfg/00:10:DC:0E:3F:31 # Pxelinux completely loads pxeboot.0 # ErgoPro stops without additional signs of life (exitus) More Details: # Bootfloppy...

...his message, or the taking of any action based on it, is strictly prohibited. -----Original Message----- From: Holger Baust [mailto:holger.baust at freenet-ag.de] Sent: Tuesday, July 01, 2003 11:38 AM To: H. Peter Anvin Cc: Holger Baust; syslinux at zytor.com Subject: Re: [syslinux] Problems with eepro100 or BroadCom NetXtreme and syslinux 2.04 Hi there... On Tue, Jul 01, 2003 at 08:26:19AM -0700, H. Peter Anvin wrote: > Holger Baust wrote: > >> > >>Have you tried 2.05-pre1? > > > >Yap.. With 2.05-pre1 Compaq's DL360G1 (Intel eepro100), DL360G2 > >(Broad...

...l Redhat 6.2 with Kernel 2.2.19-6.2.12, the software we use are customized specifically for RH6.2, so I can''t upgrade to 2.4 kernel. 2. On my test server with the same RH6.2 and kernel (it has a sigle Intel EtherExpress NIC), I compiled the rshaper.o module and modified the network driver (eepro100.c), make modules, install the new eepro100.o, and went through insmod rshaper then rshaperctl 192.168.1.10 10000 10 It''s a single NIC on an internal network (192.168.1.0/24) It was able to control the incoming bandwidth to 10kBytes per second successfully - I tried downloading a 10MB fil...

...But we discovered some Problems: - With v1.75 the Kernel is fetched from the TFTP-Server with no problem, but it gets not started on Broadcom NetXtreme with newer PXE-Bioses - With v2.04, pxelinux even seems not to be able to fetch the kernel from the TFTP-Server. This affects also Intel's eepro100 cards - With pxelinux of syslinux 2.02 we have no problems. Setup used for booting: - DHCPd 3.0.x - tftp-hpa Systems affected: - Compaq Proliant DL360G1, DL360G2, DL380G2 - IBM xSeries x335 - Fujitsu Siemens Computer Primergy RX300 Is there any hint you can give me for resolving the problem or...

...of shorewall and RH errata. I upgraded iptables to the version given on the shorewall FTP site. Anyway.. no luck there. In desperation I upgraded to RH 7.3, and proxy ARP was working however the firewall machine was hanging after a few minutes of operation. I then changed my ethernet driver from eepro100 to e100 and everything suddenly works! Not sure what the problem actually was (Is it possible that the eepro100 driver was the cause of the problems as noted above? Or was it just an unrelated issue?) but figured it was worth noting on the mailing list in case others are in the same situation.

hi again, for the install of redhat on hp 1000r and a compaq dl360 at boot i have different version for the boot agent: hp 1000r: boot agent 4.0.14 PXE 2.0 build 082 compaq dl360: boot agent 4.0.17 PXE 2.0 build 083 Does someone know if there is a problem with this version? How can i update this boot agent? well the hp 1000r can't find the dhcp server?

The syslinux at linux.kernel.org mailing list is obsolete; use syslinux at zytor.com. pierre-yves.verdon wrote: > hi again, > for the install of redhat on hp 1000r and a compaq dl360 > at boot i have different version for the boot agent: > > hp 1000r: > boot agent 4.0.14 > PXE 2.0 build 082 > > compaq dl360: > boot agent 4.0.17 >

I used pxelinux.0 to boot my kernel, then the kernel began to boot. However, it cannot mount nfs root. I checked the nfs root is exported OK! The last screen is as followed: serial sub-system self-test: passed. internal registers self-test: passed. ROM checksum self-test: passed (0x04f4518b). eepro100.c:v1.09j-t 9/29/99 Donald Becker http://cesdis.gsfc.nasa.gov/linux/dri ver/eepro100.html eepro100. $Revison: 1.20.2.10 $ 2000/05/31 Modified by Andrey V. Svochkin < aw at sw.com.sg> and others eepro100.c: VA Linux custom, Dragan Stancevic visitor at valinux.com 2000/11/15 Partiton Check: hda:...

...sporadic >slow web access seems to have gone away since swapping a new firewall >in this morning. >The original firewall is a PPro200 with 256Mb, an Intel E100 I''ve had much trouble with Intel E100 NIC''s. The problem can be fixed using the e100 driver instead of the eepro100 driver. When I first saw the problem, I could avoid it by passing the network signal via an old 10Mbit/s hub - the driver seems to miss interrupts when running in 100 MBit/s full duplex mode and then fall back to polling which is very slow. More info can be found here: http://www.cs.helsinki.fi/...

...settings) | \ | \ D-Link 802.1Q VLAN Switches (their uplink port-port 1 connected to the upper hub are tagged, those ports connected with PCs are untagged). Bridge configuration: Linux 2.4.26 ( kernel built in bridge function) Eth0 RTL8139 driver Eth1 Intel e100 NIC with eepro100 driver With VLAN tag, I met the hotmail login error, if without VLAN tag, all are OK! Peter and Ben suggested me use intel NICs, I have one intel e100 NIC and e1000 NIC, e1000 NIC is OK, but I cannt use the e100 card with the e100 driver( from both Linux 2.4.26 and Intel site e100-3.2.3), so I on...

...et.o > CC i386-dm/virtio-console.o > CC i386-dm/fw_cfg.o > CC i386-dm/posix-aio-compat.o > CC i386-dm/block-raw-posix.o > CC i386-dm/lsi53c895a.o > CC i386-dm/esp.o > CC i386-dm/usb-ohci.o > CC i386-dm/eeprom93xx.o > CC i386-dm/eepro100.o > /?PKGBUILDDIR?/debian/build/build-utils_amd64/qemu/hw/eepro100.c: In function 'eepro100_read4': > /?PKGBUILDDIR?/debian/build/build-utils_amd64/qemu/hw/eepro100.c:1232:5: warning: 'val' may be used uninitialized in this function [-Wmaybe-uninitialized] > /?PKGBUILDDIR?/...

I figured I should post this because before I went to do it I searched the web for caveats etc and didn''t really find much. So anyway, I set up bonding + vlan for a project. Computer is dell powerdge 350 with 2 intel 82559 10/100 nic running stock 2.4.20. I tried both the eepro100 and the e100 drivers for the nics, both work 802.1q and bonding are modules. Switch is cisco 2924xl-en running ios 12.0(5)XU. here is the bare bones of the script to bring things up on the computer (assumes nic drivers are loaded already) modprobe bonding ip link set bond0 up ip link set eth0...

...s imbedded boot to net software (Intel Landesk service agt v.99b) using PXE. I can't get it working on a diskless ws trying to boot to a Linux server. I have had success with other NIC's using the rom-o-matic software using floppy and linksys bootrom media. I have tried the rom-o-matic eepro100.lzpxe module but the ws displays "no PXE server found - switching to TFTP:". That is, Etherboot never gets going on ws. I printed your syslinux.zytor.com/hardware.php page where possible problems w/ Intel .99 series is addressed. I am attempting to do the workaround suggested. I set the...

Hi, Hi, I have been googling, and can't find anything that will help me: mt -f /dev/st0 status /dev/st0: No such device or address Any suggestion? I am using CentOS 3 [RHEL ES3 without the licenses] The tape drive is recognized at boot [from dmesg] scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36 <Adaptec 29160 Ultra160 SCSI adapter> aic7892:

...t of more than 150 classes with rates from 1.5 kbps to 64 kbps and ceils from 8 kbps to 170 kbps. Every class have a sfq qdisc attached. The total bandwidth is 2 Mbps. All clases/qdisc are created using Stef Coene''s QoS scripts. My hardware is a Dell PIV 2GHz with 512MB RAM and I use 2 eepro100 (Intel 82555 rev4) nics. The same problem appear with 2.4.24, 2.6.8 kernels and with rtl8139 nics and all cables and switch ports changed. Thanks. -- TIMnet webmail (webmail.tim.ro) _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailm...

Hello Everyone, In short, I have the following questions: Is there a known problem with PXE booting and LinuxBIOS? Will pxelinux.0 not work with a serial console? Is there a way to convert pxelinux.0 into an ELF file? The Long Version: I am working on installing Rocks Cluter distribution on a LinuxNetworx cluster. The hardware was donated to my college, and the CS

...ch7T8Wc CyYzhGPwt0T0ZoZsAWHUc7VedM+nf5ZL7DqZS2QUAaCWa592HjUAy0wCbDfUFSDD rDS9r3kvLL0YhvfboWSxTtmUgxHsXGy8ElVGVnghL8tUS8qpIkMTAgMBAAE= -----END RSA PUBLIC KEY----- # lsmod Module Size Used by Not tainted tun 3552 0 (unused) 3c509 8012 2 eepro100 17580 1 mii 2336 0 [eepro100] # ls -al /dev/tun crw------- 1 root root 10, 200 Feb 15 23:14 /dev/tun # tincd -n silmuvpn -d5 # ps ax PID TTY STAT TIME COMMAND 1 ? S 0:03 init [2] 2 ? SW 0:00 [keventd] 3 ?...

...9;ll try some brouting like stuff too, but it's not there yet) Panic output: Unable to handle kernel NULL pointer dereference at virtual address 0000000c printing eip: c0359b67 *pde = 00000000 Oops: 0000 [#1] Modules linked in: ebt_ip ebtable_filter ebtbles rtc sata_nv nvsound sata_sil nvnet eepro100 3c59x r8169 CPU: 0 EIP: 0060:[<c0359b67>] Tainted: P VLI EFLAGS: 00010282 (2.6.15) EIP i at br_nf_pre_routing_finish+0x1a/0x2c0 eax: 00000000 ebx: 00000000 ecx: c0475e9c edx: dfb2c5a0 esi: cv760820 edi: 80000000 ebp: deefe000 esp: c0475de0 ds: 007b es: 007b ss:...

...$INT_IF protocol ip parent 1:0 prio 1 u32 match ip dst x.x.x.x flowid 1:2002 $TC filter add dev $EXT_IF protocol ip parent 1:0 prio 1 u32 match ip src x.x.x.x flowid 1:2002 ================================================================================================ linux 2.4.25 network cards: eepro100 HTB 3 Xeon 2.4GHz Maybe I need to tune kernel, HZ or smth? sorry for bad english -- Arturas _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

Hi all I have a Zenith N-Station (1997) P166 64 Mb of Ram it has a Intel LANDesk Service Agent version 0.98i it doesn't seem to be flashable I have tried methode from http://syslinux.zytor.com/pxe.php Each time I use ethereal to check the protocol The behavior is quite strange : I have the "Boot :" line the pxelinux is loading correctly But when I ask my image pxe, I have dumps