search for: echok

...^O; min = 1; time = 0; -parenb -parodd cs8 -hupcl -cstopb cread -clocal -crtscts -ignbrk -brkint -ignpar -parmrk -inpck -istrip -inlcr -igncr icrnl ixon -ixoff -iuclc -ixany -imaxbel -iutf8 opost -olcuc -ocrnl onlcr -onocr -onlret -ofill -ofdel nl0 cr0 tab0 bs0 vt0 ff0 isig icanon iexten echo echoe echok -echonl -noflsh -xcase -tostop -echoprt echoctl echoke another query i had was on hiding arguments passed to ssh. I have a requirement to spawn some ssh command like (ssh ip -o password=221 ip ) which has password in arguments. can we hide this in listing from ps , /proc outputs. Please suggest...

...min = 1; time = 0; -parenb -parodd cs8 hupcl -cstopb cread clocal -crtscts -ignbrk -brkint -ignpar -parmrk -inpck -istrip -inlcr -igncr -icrnl -ixon -ixoff -iuclc -ixany -imaxbel -iutf8 -opost -olcuc -ocrnl onlcr -onocr -onlret -ofill -ofdel nl0 cr0 tab0 bs0 vt0 ff0 -isig -icanon iexten echo echoe echok -echonl -noflsh -xcase -tostop -echoprt echoctl echoke $ sudo cat /dev/ttyS0 $GPGLL,0000.00000,N,00000.00000,W,170638.0,V*3D $GPGLL,0000.00000,N,00000.00000,W,170638.0,V*3D $GPGLL,0000.00000,N,00000.00000,W,170638.0,V*3D $GPGLL,0000.00000,N,00000.00000,W,170639.0,V*3C $GPGLL,0000.00000,N,00000.000...

I setup a ssh chroot jail following this[1] guide. It works for my user to login, use ls and use scp which is all I really want. I do have a problem I cannot solve: when connected and navigating the filesystem, the backspace key actually moves the cursor forward and does not delete what I type. I may have found a hint from some googling that readline will read in /etc/inputrc on login but if

...= ^O; min = 1; time = 0; parenb parodd cs7 hupcl -cstopb cread -clocal -crtscts -ignbrk -brkint -ignpar -parmrk inpck istrip -inlcr -igncr icrnl ixon ixoff -iuclc -ixany -imaxbel -iutf8 opost -olcuc -ocrnl onlcr -onocr -onlret -ofill -ofdel nl0 cr0 tab0 bs0 vt0 ff0 isig icanon -iexten -echo echoe echok -echonl -noflsh -xcase -tostop -echoprt -echoctl echoke According to APC, the baud rate should be 2400. If I set it to 2400, it gets reset to 9600.

Hi Charles; I tried both of your suggestions: 1) run stty -f /dev/cuaU0 raw jusbefore running solis 2) Unplug/plug, and run solis right after. The problem still persists. [~]>stty -a -f /dev/cuaU0 speed 9600 baud; 0 rows; 0 columns; lflags: icanon isig iexten echo echoe -echok echoke -echonl echoctl -echoprt -altwerase -noflsh -tostop -flusho -pendin -nokerninfo -extproc iflags: -istrip icrnl -inlcr -igncr ixon -ixoff ixany imaxbel -ignbrk brkint -inpck -ignpar -parmrk oflags: opost onlcr -ocrnl tab0 -onocr -onlret cflags: cread cs8 -parenb -parod...

...v/ttyS0, Line 0, UART: 16550A, Port: 0x03f8, IRQ: 4 Baud_base: 115200, close_delay: 50, divisor: 0 closing_wait: 3000 Flags: spd_normal skip_test # stty -F /dev/ttyS0 speed 2400 baud; line = 0; min = 1; time = 0; -brkint -icrnl -imaxbel -opost -onlcr -isig -icanon -iexten -echo -echoe -echok -echoctl -echoke -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 665 bytes Desc: OpenPGP digital signature URL: <http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20151123/7d52a602/attachment....

When running R from the terminal on Linux (Ubuntu 16.04), it core dumps whenever / wherever I press Ctrl-4 or Ctrl-\. You get thrown back to the terminal with "Quit (core dump)" being the only message. Grepping the R source code, it doesn't look like that message is generated by R itself. Over on Twitter, it has been confirmed to also happen on macOS. $ R -d valgrind --vanilla

...dev->name, __FILE__, __LINE__); } if (tcgetattr(dev->fd, &t) >= 0) { t.c_ispeed = dev->speed; t.c_ospeed = dev->speed; t.c_lflag &= ~(ICANON | ISIG | IEXTEN | ECHO | ECHOE | ECHOK | ECHOKE | ECHONL | ECHOCTL | ECHOPRT | ALTWERASE | NOFLSH | TOSTOP | FLUSHO | PENDIN | NOKERNINFO | EXTPROC); t.c_iflag &= ~(ISTRIP | ICRNL | INLCR | IGNCR | IXON | IXOFF | IXANY | IMAXBEL | IGNBRK | BRKINT | INPCK | IGNPAR | PARM RK); t.c_oflag &= ~(OPOST | ONLC...

...start = ^q; stop = ^s; susp = ^z; dsusp = <undef>; rprnt = ^r; flush = ^o; werase = ^w; lnext = ^v; -parenb -parodd cs8 -cstopb hupcl cread -clocal -loblk -parext -ignbrk brkint -ignpar -parmrk -inpck -istrip -inlcr -igncr icrnl -iuclc ixon -ixany -ixoff -imaxbel isig icanon -xcase echo echoe echok -echonl -noflsh -tostop echoctl -echoprt echoke -defecho -flusho -pendin iexten opost -olcuc onlcr -ocrnl -onocr -onlret -ofill -ofdel tab3 I have confirmed that these same problems occur when the client is OpenSSH v3.1p1 on a Linux machine, so it is not related to the SecureCRT client - it is d...

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Has anyone used nut with a XPCC UPS, in particular one of the XVRT units? Their supplied monitoring tool "works", but I'd really prefer to use nut if possible. I've systematically gone through each of the drivers in /lib/nut and none seem to talk with the unit properly. I'll be talking with a XPCC support person tomorrow, though

Hey, I''ve installed Xen 3.0 on a freshly installed Debian Sarge. dom0 is working nicely (kernel 2.6.12.6-xen0). Then I created a domU, again with Debian Sarge, booting Xen''s vmlinuz-2.6.12-xenU. Unfortunately ctrl-c does not work in the domU''s console, neither if I create the domU with "xm create -c ..." nor if I attach to it later. It doesn''t matter

Hello everyone, recently I've found something I consider a bug. Correct me if I'm wrong, but I always thought that Linux' EOL is 0x0A. Imagine my surprise when I saw that all messages that are being output on to the stderr (on any Linux I've tested - Fedora and Ubuntu) are terminated with 0x0D, 0x0A. Maybe that's standard behaviour of all stderr messages in all Linux

...= 1; time = 0; -parenb -parodd -cmspar cs8 -hupcl -cstopb cread -clocal -crtscts -ignbrk -brkint -ignpar -parmrk -inpck -istrip -inlcr -igncr icrnl ixon -ixoff -iuclc -ixany -imaxbel iutf8 opost -olcuc -ocrnl onlcr -onocr -onlret -ofill -ofdel nl0 cr0 tab0 bs0 vt0 ff0 isig icanon iexten echo echoe echok -echonl -noflsh -xcase -tostop -echoprt echoctl echoke -flusho -extproc This will prevent QUIT to be signalled when pressing Ctrl+\ and thereby R (Python, ...) won't core dump. One can of course still use kill -s QUIT <pid>. To reset the above, either restart the terminal or use either...

...scellaneous AssignedTo: bitbucket at mindrot.org ReportedBy: river at wikimedia.org when logging into SunOS 4.1.4 using SecureCRT 6.0.1, some terminal flags are not set: echoke, echoe, echoctl. most notably, this causes filename completion in 'csh' to not work correctly. when connecting via telnet or rlogin, they are set. when connecting from NetBSD with OpenSSH, these flags are also set correctly, so this may be a SecureCRT-specific issue. -- Configure bugm...

Turns out another user reported the same issue with a slightly different model: https://github.com/networkupstools/nut/issues/231 <https://github.com/networkupstools/nut/issues/231> The "stty -f /dev/cuaU0 raw" trick should help, but I am confused as to why FreeBSD has different "raw" settings than what is set up at the same time as the baud rate:

...n.internal "1.06" 0.000986 send_to_all: SETINFO driver.name "bestups" 17.267267 Unable to detect a Best/SOLA or Phoenix protocol UPS $ stty -F /dev/ttyS0 speed 2400 baud; line = 0; min = 1; time = 0; -brkint -icrnl -imaxbel -opost -onlcr -isig -icanon -iexten -echo -echoe -echok -echoctl -echoke $ setserial -g /dev/ttyS0 /dev/ttyS0, UART: 16550A, Port: 0x03f8, IRQ: 4 // note that the port has been reconfigured // UPS is plugged, on and connected $ /lib/nut/bestups -a Best_Power_Patriot_Pro_750 -DDDDD Network UPS Tools - Best UPS driver 1.06 (2.7.1) 0.000000 debug le...

...-clocal -crtscts >> -ignbrk -brkint -ignpar -parmrk -inpck -istrip -inlcr -igncr icrnl ixon >> -ixoff >> -iuclc -ixany -imaxbel -iutf8 >> opost -olcuc -ocrnl onlcr -onocr -onlret -ofill -ofdel nl0 cr0 tab0 bs0 >> vt0 >> ff0 >> isig icanon iexten echo echoe echok -echonl -noflsh -xcase -tostop >> -echoprt >> echoctl echoke >> >> >> >> another query i had was on hiding arguments passed to ssh. I have a >> requirement to spawn some ssh command like (ssh ip -o password=221 ip ) >> which has password in arguments...

...ode with no characters interpreted, 8-bit data path. + */ +void +cfmakeraw(t) + struct termios *t; +{ + + t->c_iflag &= +~(IMAXBEL|IXOFF|INPCK|BRKINT|PARMRK|ISTRIP|INLCR|IGNCR|ICRNL|IXON|IGNPAR); + t->c_iflag |= IGNBRK; + t->c_oflag &= ~OPOST; + t->c_lflag &= +~(ECHO|ECHOE|ECHOK|ECHONL|ICANON|ISIG|IEXTEN|NOFLSH|TOSTOP|PENDIN); + t->c_cflag &= ~(CSIZE|PARENB); + t->c_cflag |= CS8|CREAD; + t->c_cc[VMIN] = 1; + t->c_cc[VTIME] = 0; +} + +int +tcsendbreak(fd, len) + int fd, len; +{ + struct timeval sleepytime; + + sleepytime.tv_sec = 0; + sleepytime.tv_usec = 40...

Im trying to run this program called Thinkboxx and wen it tryes to comunicate over the comm port it hangs. Here are som output to read. earlier on i get: Call kernel32.VirtualAlloc(43050000,00001000,00001000,00000004) ret=0058557c Ret kernel32.VirtualAlloc() retval=43050000 ret=0058557c thats from vhere the com port gets an virtual memory space, i think. and in the end i have: Call