search for: ecam

I need to do PCIe memory mapped configuration space access from a com32 module. (ECAM, memory mapped, not CAM, which uses I/O port access). I know how to find the base address to the config space in Linux and use ECAM to access configuration registers. com32/lib/pci does not use ECAM. In Linux the region for ECAM is referred to as PCI MMCONFIG. (often shows up as e0000000-effffff...

...t be 1. + +Notes: + +- DMA from the IOMMU device isn't managed by another IOMMU. Therefore the + virtio-iommu node doesn't have an "iommus" property, and is omitted from + the iommu-map property of the root complex. + +Example: + +pcie at 10000000 { + compatible = "pci-host-ecam-generic"; + ... + + /* The IOMMU programming interface uses slot 00:01.0 */ + iommu0: iommu at 0008 { + compatible = "virtio,pci-iommu"; + reg = <0x00000800 0 0 0 0>; + #iommu-cells = <1>; + }; + + /* + * The IOMMU manages all functions in this PCI domain except + *...

...t be 1. + +Notes: + +- DMA from the IOMMU device isn't managed by another IOMMU. Therefore the + virtio-iommu node doesn't have an "iommus" property, and is omitted from + the iommu-map property of the root complex. + +Example: + +pcie at 10000000 { + compatible = "pci-host-ecam-generic"; + ... + + /* The IOMMU programming interface uses slot 00:01.0 */ + iommu0: iommu at 0008 { + compatible = "virtio,pci-iommu"; + reg = <0x00000800 0 0 0 0>; + #iommu-cells = <1>; + }; + + /* + * The IOMMU manages all functions in this PCI domain except + *...

...IOMMU device isn't managed by another IOMMU. Therefore the > + virtio-iommu node doesn't have an "iommus" property, and is omitted from > + the iommu-map property of the root complex. > + > +Example: > + > +pcie at 10000000 { > + compatible = "pci-host-ecam-generic"; > + ... > + > + /* The IOMMU programming interface uses slot 00:01.0 */ > + iommu0: iommu at 0008 { > + compatible = "virtio,pci-iommu"; > + reg = <0x00000800 0 0 0 0>; > + #iommu-cells = <1>; > + }; > + > + /* > + * The IOMM...

Hi there, I have a problem when I try to create a new user with swat. I use binaries of Samba 2.2.2 coming from www.samba.org, or from www.sunfreeware.com on Solaris 2.6 and on 8. I compiled the sources and the result is the same. When I click on "Add New User" (Server Password Management), I receive a nearly blank page: I can only see the samba gif on top and the user is not

Implement the virtio-iommu driver, following specification v0.12 [1]. Since last version [2] we've worked on improving the specification, which resulted in the following changes to the interface: * Remove the EXEC flag. * Add feature bit for the MMIO flag. * Change domain_bits to domain_range. Given that there were small changes to patch 5/7, I removed the review and test tags. Please find

Implement the virtio-iommu driver, following specification v0.8 [1]. Changes since v2 [2]: * Patches 2-4 allow virtio-iommu to use the PCI transport, since QEMU would like to phase out the MMIO transport. This produces a complex topology where the programming interface of the IOMMU could appear lower than the endpoints that it translates. It's not unheard of (e.g. AMD IOMMU), and the

Implement the virtio-iommu driver, following specification v0.8 [1]. Changes since v2 [2]: * Patches 2-4 allow virtio-iommu to use the PCI transport, since QEMU would like to phase out the MMIO transport. This produces a complex topology where the programming interface of the IOMMU could appear lower than the endpoints that it translates. It's not unheard of (e.g. AMD IOMMU), and the

Implement the virtio-iommu driver, following specification v0.9 [1]. Only minor changes since v5 [2]. I fixed issues reported by Michael and added tags from Eric and Bharat. Thanks! You can find Linux driver and kvmtool device on v0.9 branches [3], module and x86 support on virtio-iommu/devel. Also tested with Eric's QEMU device [4]. [1] Virtio-iommu specification v0.9, sources and pdf

Implement the virtio-iommu driver, following specification v0.9 [1]. Only minor changes since v5 [2]. I fixed issues reported by Michael and added tags from Eric and Bharat. Thanks! You can find Linux driver and kvmtool device on v0.9 branches [3], module and x86 support on virtio-iommu/devel. Also tested with Eric's QEMU device [4]. [1] Virtio-iommu specification v0.9, sources and pdf

Implement the virtio-iommu driver, following specification v0.8 [1]. Changes since v3 [2]: * Rebase onto v4.20-rc2. Patch 3 now touches drivers/of/base.c instead of drivers/pci/of.c, since the map_rid() function has moved. * Removed the request timeout, that depended on DEBUG. * Other small fixes addressing comments on v3. You can find Linux driver and kvmtool device on my virtio-iommu/v0.8.1

Implement the virtio-iommu driver, following specification v0.9 [1]. Since v4 [2] I fixed the issues reported by Eric, and added Reviewed-by from Eric and Rob. Thanks! I changed the specification to fix one inconsistency discussed in v4. That the device fills the probe buffer with zeroes is now a "SHOULD" instead of a "MAY", since it's the only way for the driver to know

Implement the virtio-iommu driver, following specification v0.9 [1]. Since v4 [2] I fixed the issues reported by Eric, and added Reviewed-by from Eric and Rob. Thanks! I changed the specification to fix one inconsistency discussed in v4. That the device fills the probe buffer with zeroes is now a "SHOULD" instead of a "MAY", since it's the only way for the driver to know