search for: e5420

...]: apic_id 9, version 32, address 0xfec88000, GSI 24-47 (XEN) Enabling APIC mode: Flat. Using 2 I/O APICs (XEN) Intel VT-d has been enabled (XEN) Using scheduler: SMP Credit Scheduler (credit) (XEN) Detected 2493.825 MHz processor. (XEN) HVM: VMX enabled (XEN) CPU0: Intel(R) Xeon(R) CPU E5420 @ 2.50GHz stepping 06 (XEN) Booting processor 1/0 eip 8c000 (XEN) CPU1: Intel(R) Xeon(R) CPU E5420 @ 2.50GHz stepping 06 (XEN) Booting processor 2/1 eip 8c000 (XEN) CPU2: Intel(R) Xeon(R) CPU E5420 @ 2.50GHz stepping 06 (XEN) Booting processor 3/5 eip 8c000 (XEN) CPU3: Intel(...

Name : Tanzilur Rahman Proposal : Installation of Centos 6.3 on Dell latitude E5420 Location : http://wiki.centos.org/HowTos/Laptops/Dell/Latitude-E5420 Thank You -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.centos.org/pipermail/centos-docs/attachments/20130201/0de5486a/attachment-0006.html>

...hardware pages, but I can't find the answer there. I'd like to know if, for an Asterisk only system (nothing else of note running on it), I get a real gain from having 2 CPUs. Does the amount of traffic/SIP registrations/codec translation possible doubles with 2 CPUs? (each quad core E5420 to be precise)? Does it increase by 50%? It is only a marginal increase, or none at all? I wish I could test it myself, but I haven't bought the hardware yet and this will help me decide what I am buying. Regards, Mike -------------- next part -------------- An HTML at...

...I''m using the same domU configuration files for the new and the old installation. Look at the field, cache size. *"cat /proc/cpuinfo" under dom0.* processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 23 model name : Intel(R) Xeon(R) CPU E5420 @ 2.50GHz stepping : 10 cpu MHz : 2493.748 cache size : 6144 KB physical id : 0 siblings : 1 core id : 0 cpu cores : 1 fpu : yes fpu_exception : yes cpuid level : 13 wp : yes flags : fpu de tsc msr pae cx8 apic sep mtrr cmov pat clflush acpi...

This is a new installation. Here are the specs of my system: Linux asterisk 2.6.21.5-smp #2 SMP Tue Jun 19 14:58:11 CDT 2007 i686 Intel(R) Xeon(R) CPU E5420 @ 2.50GHz GenuineIntel GNU/Linux 08:08.0 Ethernet controller: Digium, Inc. Unknown device 8000 (rev 11) (ethernet?? first time with a card like that for me) dmesg Zapata Telephony Interface Registered on major 196 Zaptel Version: 1.4.12.1 Zaptel Echo Canceller: MG2 proc & dev root at asteri...

Hello, What is the maximum number of simultaneous calls supported by asterisk. thks -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20090703/0794c554/attachment.htm

...e to use HP Storage Drivers provided for RedHat Enterprise Linux 5? - How is HP hardware RAID-1's performance? Should I use HP's hardware RAID or software RAID in this case? Thanks a lot and looking forward to your answers. Chau My server configuration: HP DL380R05 E5420 2GB Base AP Server (1) Quad-Core IntelR XeonR Processor E5420 Two Embedded NC373i Multifunction Gigabit / 2 GB (2 x 1 GB) PC2-5300 Fully Buffered DIMMs (DDR2-667)/HP Smart Array P400/256MB Controller /Rack (2U)/Hot Plug Fully Redundant Fans Standard Two HP 146GB 10k 2.5 SAS HP SP HDD HP 1000W IEC C...

Hi, I am the next scenario: ############################################################################# SERVER SIDE? (64 bit architecture) ?############################################################################# Two Storage Machines with: HARDWARE DELL PE2900 III Intel Quad Core Xeon E5420 2,5Ghz, 2x6Mb cache, Bus 1333FSB RAM 4 GB FB 667Mhz (2x2Gb) 8 HDD 1 TB, Near Line SAS 3,5" 7,200 Hot plug Rack format 5U Raid PER 6i 256 Mb redundant Power Supply Network Adapter Dual Intel PRO 1000 PCIe x 4 CDRW/DVD SOFTWARE * Suse SLES 10 SP2 x86_64 * Kernel: 2.6.16.60-0.21-smp #1...

I am attempting to implement XFS on a new system. System: Supermicro SC846 TQ-R900B - rack-mountable SUPERMICRO X7DWN+ - motherboard 3ware 9650SE-24M8 - storage controller 10 Hitachi DeskStar 7K1000 - hard drive - 1 TB 8GB Ram 2 Intel Quad-Core Xeon E5420 / 2.5 GHz processor Installed Centos 5.1 X86 64 from DVD. System on /dev/sda1 ? 250GB ext3 (raid 5). /home will be on /dev/sdb1 ? over 7TB XFS. Kernel version issue --------------------------------- [root at csfs50 work]# yum install kmod-xfs.x86_64 Loading "installonlyn" plugin S...

...uot;make check" tests fail in qemu with: Booting from ROM... This kernel requires an x86-64 CPU, but only detected an i686 CPU. Unable to boot - please use a kernel appropriate for your CPU. How does qemu detect the CPU type? I'm running a 64-bit ArchLinux (without KVM) on an Intel Xeon E5420 processor. I'm able to boot qemu's small test image (http://wiki.qemu.org/download/linux-0.2.img.bz2) and the libguestfs iso image test passes, but the make-{debian,fedora,ubuntu,windows}-img.sh scripts all fail with the CPU mismatch bios error. I added "-v" to guestfish in imag...

...artition, but F19 extlinux 4.05 can boot either F19 or F21. The same setup works without any troubles on 21 other computers, but on this particular one, the F21 extlinux cannot boot the F21 kernel/initramfs. The machine in question is very old -- it's an Intel S5000VCL motherboard with a Xeon E5420 CPU and 1 GB of memory. I don't have any others with this same motherboard. But I do have older systems with less memory that work fine (for example, an Intel SE7230NH1LX motherboard with a Pentium 4 cpu and 512 MB of memory). Is there any way of troubleshooting this? Thanks, Andy

Hi, I have been trying to figure out why my Supermicro X7DWA-N with dual Xeon E5420''s locks up occasionally when running Xen, I''ve tried 3.2.1 and 3.3 with the Xensource 2.6.18 kernel, with gentoo 2.6.21, and 2.6.25 and 2.6.27 kernels patched with suse xen patches, every single combination suffers from occasional lockups :(, I am reasonably confident that the har...

...otection! X64 CentOS system. Running Asterisk as Non-root. Downloaded latest G729 driver and registered it sucessfully. Restarted Asterisk. But still get this error! Asterisk 1.4.21.2 built by shaunw @ xxx.xxx.biz on a x86_64 running Linux on 2008-08-06 19:11:02 UTC Intel(R) Xeon(R) CPU E5420 @ 2.50GHz show g729 No such command 'show g729' (type 'help show g729' for other possible commands) chan_sip.c:5506 process_sdp: No compatible codecs, not accepting this offer! Please help. Purchased the license file and registered it. Loaded: http://downloads.digium.com/pub/tel...

...2011 x86_64 x86_64 x86_64 GNU/Linux [root at xensrv ~]# rpm -q ntp ntp-4.2.2p1-9.el5.centos.2.1 [root at xensrv ~]# cat /proc/cpuinfo - 8 times the following processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 23 model name : Intel(R) Xeon(R) CPU E5420 @ 2.50GHz stepping : 6 cpu MHz : 1998.000 cache size : 6144 KB physical id : 0 siblings : 1 core id : 0 cpu cores : 1 fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu tsc msr pae cx8 apic mtrr...

...48 4 51 5 3 @ 55 and 2 @ 70 6 3 @ 60 and 3 @ 90 The server is a Red Hat Enterprise Linux 5.2 server, running Linux kernel 2.6.18.-128. It has 2 quad-core Xeon E5420 processors with 6 MB of L2 cache for each processor. The server has 32 GB of RAM. While the tests were run, the memory utilization was very low, and there was not much I/O. The CPU utlization was 100% for each core running an instance of R. Our theory is that the degradation is due to cache and...

...x 4.05 can boot either F19 or F21. The same setup works > without any troubles on 21 other computers, but on this particular one, > the F21 extlinux cannot boot the F21 kernel/initramfs. > > The machine in question is very old -- it's an Intel S5000VCL motherboard > with a Xeon E5420 CPU and 1 GB of memory. I don't have any others with > this same motherboard. But I do have older systems with less memory that > work fine (for example, an Intel SE7230NH1LX motherboard with > a Pentium 4 cpu and 512 MB of memory). > > Is there any way of troubleshooting this...

...an Asterisk > only > > > system (nothing else of note running on it), I get a real gain from > > having 2 > > > CPUs. > > > > > > Does the amount of traffic/SIP registrations/codec translation possible > > > doubles with 2 CPUs? (each quad core E5420 to be precise)? Does it > > increase > > > by 50%? It is only a marginal increase, or none at all? > > > > You don't say anything about your possible kind of usage, so it's > > difficult to provide any specific answer to your question. In general, > >...

...there. I'd like to know if, for an Asterisk only > > system (nothing else of note running on it), I get a real gain from > having 2 > > CPUs. > > > > Does the amount of traffic/SIP registrations/codec translation possible > > doubles with 2 CPUs? (each quad core E5420 to be precise)? Does it > increase > > by 50%? It is only a marginal increase, or none at all? > > You don't say anything about your possible kind of usage, so it's > difficult to provide any specific answer to your question. In general, > a few things are true: > *...

I have several systems running 64bit SLES11SP1. I''m trying to Live Migrate between a couple of them and it''s not working, although the same VM will run on each one starting it manually. The system are not identical. Would one expect migration to work between these two systems? See below. Thanks, James The first system is a ProLiant DL360 G6: Proc 1:2533 MHz Execution

...I have the next scenario: ############################################################################# SERVER SIDE? (64 bit architecture) ?############################################################################# Two Storage Machines with: HARDWARE DELL PE2900 III Intel Quad Core Xeon E5420 2,5Ghz, 2x6Mb cache, Bus 1333FSB RAM 4 GB FB 667Mhz (2x2Gb) 8 HDD 1 TB, Near Line SAS 3,5" 7,200 Hot plug Rack format 5U Raid PER 6i 256 Mb redundant Power Supply Network Adapter Dual Intel PRO 1000 PCIe x 4 CDRW/DVD SOFTWARE * S...