search for: e4e4

...]: --------- FIRMWARE LOADING: (usb) [1 devices] ..Got all 1 devices 'xpp_fxloader'[5003]: --------- FIRMWARE IS LOADED pbx at loicvoip1:~# /usr/share/dahdi/xpp_fxloader load 'xpp_fxloader'[5015]: --------- FIRMWARE LOADING: (load) [1 devices] Got all 1 devices INFO: usb:005/004: ID=E4E4:1141 [Xorcom LTD / Astribank / ] INFO: Loading hexfile to FPGA: /usr/share/dahdi/FPGA_1141.hex (version 6799) INFO: usb:005/004: ID=E4E4:1141 [Xorcom LTD / Astribank / ] INFO: Load PIC: /usr/share/dahdi/PIC_TYPE_1.hex (version 7498) INFO: Load PIC: /usr/share/dahdi/PIC_TYPE_2.hex (version 7107) INF...

...ed in this post : http://www.blogs.uni-osnabrueck.de/rotapken/2011/04/11/how-to-auto-hotplug-usb-devices-to-libvirt-vms/ That doesn't seem to be enough and the initialisation fails with a status 1: Oct 28 18:58:19 asterisk-rg 'xpp_fxloader'[1006]: Trying to find what to do for product e4e4/1160/101, device /dev/bus/usb/001/004 Oct 28 18:58:19 asterisk-rg 'xpp_fxloader'[1010]: Loading firmware '/usr/share/dahdi/USB_FW.hex' into '/dev/bus/usb/001/004' Oct 28 18:58:23 asterisk-rg 'xpp_fxloader'[1024]: Trying to find what to do for product e4e4/1161/101, d...

I'm trying to use a Xorcom Astribank wth Ubuntu 8.04, but got no success. I can see the channel bank with lsusb, but when I tried to use zaptel_hardware, or when I try the /etc/init.d/script, they don't see my Channel Bank. I compiled the latest Zaptel 1.4.10, with Astribank's dependecies, fxload and libusb-dev. Anyone have a similiar experience ? Best Regards, -- Guilherme Loch G?es

I'm having trouble getting a xorcom set up. A large part of the problem is that the box is a _long_ way away and I can't get to/at it easily, so while I could probably fix this in a few hours if the machine were in front of me, I'm struggling over a slow unreliable laggy link. Ok, enough whining from me. I have a new Xorcom plugged into the usb of a Suse 11 machine I built Dahdi

...tu 9.10 and the device is no longer initialized. When I reload the udev rules, I see that the rules seems to be correctly loaded: udevd[452]: reading '/etc/udev/rules.d/40-xpp.rules' as rules file However, these rules do not seem to be triggered: # udevadm trigger --attr-match=idVendor=e4e4 --action add UDEV [1258155881.753357] add /devices/pci0000:00/0000:00:1a.7/usb1/1-1 (usb) UDEV_LOG=7 ACTION=add DEVPATH=/devices/pci0000:00/0000:00:1a.7/usb1/1-1 SUBSYSTEM=usb DEVNAME=/dev/bus/usb/001/009 DEVTYPE=usb_device DRIVER=usb DEVICE=/proc/bus/usb/001/009 PRODUCT=e4e4/1141/ffff TYPE=...

...es a Digium TE120Pand I would like to add an Astribank zaptel_hardware sees is, but I cannot get it working pbx:~# zaptel_hardware Argument "IRQ" isn't numeric in numeric comparison (<=>) at /usr/local/share/perl/5.8.8/Zaptel/Span.pm line 114. usb:005/002 xpp_usb- e4e4:1131 Astribank-8/16 USB-firmware pci:0000:04:00.0 wcte12xp+ d161:0120 Wildcard TE12xP In the Astribank line (module part) there is a "-" sign after the module name (while the TE120P has a "+" sign). Does that mean anything? genzaptelcong doesn't generate any config...

Hi All Just a quick check on the best way to ensure multiple cards/devices load in the correct order. Asterisk 1.8 with Sangoma A101 had no problems until we introduced an Astribank. root at pabx377:/etc/asterisk# dahdi_hardware -v usb:001/004 xpp_usb+ e4e4:1162 Astribank-modular FPGA-firmware LABEL=[usb:X1060395] CONNECTOR=@usb-0000:00:1d.7-3 XBUS-00/XPD-00: FXS (14) Span 2 XBUS-00/XPD-10: FXS (8) Span 3 XBUS-00/XPD-20: FXS (8) Span 4 XBUS-00/XPD-30: FXS (8) Span 5...

...872 Rescheduling interrupts CAL: 49 74 function call interrupts TLB: 5322 5969 TLB shootdowns TRM: 0 0 Thermal event interrupts SPU: 0 0 Spurious interrupts ERR: 0 MIS: 0 lsusb Bus 007 Device 003: ID e4e4:1152 Bus 007 Device 002: ID e4e4:1142 Bus 007 Device 001: ID 0000:0000 Bus 005 Device 001: ID 0000:0000 Bus 006 Device 001: ID 0000:0000 Bus 004 Device 001: ID 0000:0000 Bus 003 Device 001: ID 0000:0000 Bus 002 Device 001: ID 0000:0000 Bus 001 Device 001: ID 0000:0000 Best reg...

...eet (DSX-1) pbx*CLI> dahdi show regdump 1 Unable to get registers on channel 1 Unable to get stats on channel 1 [Trixbox]# dahdi_hardware -v /usr/sbin/dahdi_hardware: warning - OLD DRIVER: missing '/sys/bus/xpds/devices/00:0:0/timing_priority'. Fall back to /proc usb:002/002 xpp_usb+ e4e4:1162 Astribank-modular FPGA-firmware LABEL=[usb:X1044207] CONNECTOR=@usb-0000:00:1d.7-4 XBUS-00/XPD-00: FXO (8) Span 1 DAHDI-SYNC Note: This Astribank is deployed in United Arab Emirates and I am not sure what the line type is in terms of Ground or Loop start and wondering if that makes a differe...

...;!-- WARNING: THIS IS AN AUTO-GENERATED FILE. CHANGES TO IT ARE LIKELY TO BE OVERWRITTEN AND LOST. Changes to this xml configuration should be made using: virsh net-edit ipv6 or other application using the libvirt API. --> <network> <name>ipv6</name> <uuid>49957183-e4e4-4541-8746-11be67f0a511</uuid> <forward mode='open'/> <bridge name='virbr1' stp='on' delay='0'/> <mac address='52:54:00:09:8e:66'/> <domain name='ipv6'/> <ip family='ipv6' address='2a02:xxx:xx:7::1...

H all... I have an Astribank (8FXS/16FXO), IBM X3200 M2, Asterisk-1.6.2.1, dahdi-linux-complete-2.2.1, libpri-1.4.10.2, centos-5.4 final. My problem is, every time i unplug the astribank power supply, and reconnect it, astribank cannot work again (lsusb result is 11x0)... but, after reinstall the asterisk and dahdi, astribank will detected (lsusb result is 11x2)... any suggestion? Regard,

...the lack of the firmware files May 18 14:19:22 tenora1 kernel: usb 1-6: new high speed USB device using ehci_hcd and address 3 May 18 14:19:22 tenora1 kernel: usb 1-6: configuration #1 chosen from 1 choice May 18 14:19:22 tenora1 'xpp_fxloader'[15168]: Trying to find what to do for product e4e4/1160/101, device /dev/bus/usb/001/003 May 18 14:19:22 tenora1 'xpp_fxloader'[15172]: Loading firmware '/usr/share/dahdi/USB_FW.hex' into '/dev/bus/usb/001/003' May 18 14:19:22 tenora1 'xpp_fxloader'[15174]: /usr/share/dahdi/USB_FW.hex: unable to open for input. May 1...

...CHANGES TO IT ARE LIKELY TO BE > OVERWRITTEN AND LOST. Changes to this xml configuration should be made > using: > ? virsh net-edit ipv6 > or other application using the libvirt API. > --> > > <network> > ? <name>ipv6</name> > ? <uuid>49957183-e4e4-4541-8746-11be67f0a511</uuid> > ? <forward mode='open'/> > ? <bridge name='virbr1' stp='on' delay='0'/> > ? <mac address='52:54:00:09:8e:66'/> > ? <domain name='ipv6'/> > ? <ip family='ipv6' addr...

Hi, I just got a Xorcom Astribank with 8 FXS but it does not work. So I tried resetting and loading the firmware. But loading just times out. /usr/share/zaptel/xpp_fxloader usb --------- FIRMWARE LOADING: (usb) [1 devices] 'xpp_fxloader'[11561]: USB Firmware /usr/share/zaptel/USB_FW.hex into /dev/bus/usb/002/003

On 3/19/23 20:21, Natxo Asenjo wrote: > hi, > > I have configured a routed network on my laptop with a ipv6 subnet and > dnsmasq is handing out ipv6 addresses to my vms and it works really wel, > but finding out which ips have been used is not as easy as with ipv4. > > [root at lenovo ~]# virsh domifaddr --domain wec --source lease > ?Name ? ? ? MAC address ? ? ? ?

...ion setting or buggy hardware. Have tried many options but the dahdi config as copied over from the same machine (with elastix 1.4) seems the only one that seem to work anybody has a clue? much appreciated some gory details below, HARDWARE: D201GLY2 motherboard usb:001/002 xpp_usb+ e4e4:1162 Astribank-modular FPGA-firmware DAHDI CONFIG: dahdi-channels.conf ; Span 1: XBUS-00/XPD-00 "Xorcom XPD #00/00: BRI_TE" (MASTER) group=0,11 context=from-pstn switchtype = euroisdn signalling = bri_cpe_ptmp channel => 1-2 context = default group = 63 ; Span 2: XBUS-00/XPD-01 &q...

Hey Richard, Could you share the following informations please? 1. gluster volume info <volname> 2. getfattr output of that file from all the bricks getfattr -d -e hex -m . <brickpath/filepath> 3. glustershd & glfsheal logs Regards, Karthik On Thu, Oct 26, 2017 at 10:21 AM, Amar Tumballi <atumball at redhat.com> wrote: > On a side note, try recently released health

On a side note, try recently released health report tool, and see if it does diagnose any issues in setup. Currently you may have to run it in all the three machines. On 26-Oct-2017 6:50 AM, "Amar Tumballi" <atumball at redhat.com> wrote: > Thanks for this report. This week many of the developers are at Gluster > Summit in Prague, will be checking this and respond next

...afr-self-heal-metadata.c:52:__afr_selfheal_metadata_do] 0-home-replicate-0: performing metadata selfheal on 2b34757a-0f1a-4e08-a1e2-79cb97ac496c [2017-10-25 10:40:27.306078] I [MSGID: 108026] [afr-self-heal-entry.c:847:afr_selfheal_entry_do] 0-home-replicate-0: performing entry selfheal on 57ae3707-e4e4-4572-a9d0-dd5daafe739f [2017-10-25 10:40:27.309230] I [MSGID: 108026] [afr-self-heal-common.c:1327:afr_log_selfheal] 0-home-replicate-0: Completed metadata selfheal on 2b34757a-0f1a-4e08-a1e2-79cb97ac496c. sources=0 [2] sinks=1 [2017-10-25 10:40:27.323451] I [MSGID: 108026] [afr-self-heal-common....