search for: dvdram

system: hp compact dc7800 dual 64 bit cd/dvd: oem sata -- recognized as atapi dvd c dh48c2s sata5 cd/dvd: lg gp60ns50 usb dvd -- recognized as hl-dt-st dvdram gp60ns50 attempting install using centos 6.7 x86_64 netinstall. after 'installation method' with 'local cd/dvd' selected, famous 'disc not found' shows. attempt eject cd with eject button fails. ejecting disc drawer with paper clip and closing drawer, selecting 'ok...

...ddresses for the <hostdev>. > > The one under <source> should be set to the address of the CDROM drive > on the host. It can be obtained e.g. using lsscsi: > > # lsscsi > [2:0:1:0] disk ATA ST3500418AS CC38 /dev/sda > [3:0:0:0] cd/dvd HL-DT-ST DVDRAM GH24NSB0 LN00 /dev/sr0 > > (so 'scsi_host3'(adapter) and bus='0' target='0' unit='0') > > The second address <address type='drive> is the address on the VM's > bus. > > <address type='drive' controller='1' b...

I’ve tried that post .. but either I get a new scsi passthrough controller in device manager, but no dvd or the boot in windows hangs Either that method won’t work anymore or my config is bad .. im not really sure what to put in controller, target, bus and unit .. Skickat från min iPad > 17 apr. 2020 kl. 08:38 skrev Tony Brian Albers <tba@kb.dk>: > > Hi Andreas, > >

...: configured for UDMA/133 [ 1.896439] ata1.01: configured for UDMA/133 [ 1.896738] scsi 0:0:0:0: Direct-Access ATA Maxtor 6Y120L0 YAR4 PQ: 0 ANSI: 5 [ 1.897477] scsi 0:0:1:0: Direct-Access ATA Maxtor 6Y120L0 YAR4 PQ: 0 ANSI: 5 [ 2.068361] ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-4167B, DL11, max UDMA/33 [ 2.068375] ata2.01: ATAPI: CD-956E/AKV, A99, max UDMA/33 [ 2.084228] ata2.00: configured for UDMA/33 [ 2.100283] ata2.01: configured for UDMA/33

...us and unit .. So there are two addresses for the <hostdev>. The one under <source> should be set to the address of the CDROM drive on the host. It can be obtained e.g. using lsscsi: # lsscsi [2:0:1:0] disk ATA ST3500418AS CC38 /dev/sda [3:0:0:0] cd/dvd HL-DT-ST DVDRAM GH24NSB0 LN00 /dev/sr0 (so 'scsi_host3'(adapter) and bus='0' target='0' unit='0') The second address <address type='drive> is the address on the VM's bus. <address type='drive' controller='1' bus='0' target='0' un...

...OS] 6.7 netinstall fails at insert cd to continue > system: hp compact dc7800 dual 64 bit > cd/dvd: oem sata -- recognized as > atapi dvd c dh48c2s sata5 > cd/dvd: lg gp60ns50 usb dvd -- recognized as > hl-dt-st dvdram gp60ns50 > > attempting install using centos 6.7 x86_64 netinstall. > > after 'installation method' with 'local cd/dvd' selected, famous > 'disc not found' shows. Did you try to disconnect the USB device before booting the station ? Perhaps it's detected...

On my machine I have SATA0: HD SATA1: HD these two drives are set as RAID1 SATA2: HD extra SATA3: DVD SATA4: external USB disk Snip from dmesg shows the ATAPI device being detected. ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xe400 irq 10 ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xe408 irq 10 ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata3.00: ATAPI: PIONEER BD-ROM

...ile using the Sony CD-RW drive under FreeBSD 4.x-5.4. > > Guy > > -- > Guy Helmer, Ph.D. > Principal System Architect > Palisade Systems, Inc. > > This also happens with: acd0: DVDR <HL-DT-ST DVDRAM GSA-4167B/DL10> at ata1-master UDMA33 after burning CD-Rs and DVD-Rs. Oddly enough, DVD+Rs finish without it. But every disc is readable afterwards, so I don't really worry about it. hellion# uname -a FreeBSD hellion.clcw 6.1-PRERELEASE FreeBSD 6.1-PRERELEASE #0: Thu Feb 16 10:35:13 BOT 20...

...; /dev/cdrecorder lrwxrwxrwx 1 hyde users 12 2005-01-30 19:44 e: -> /media/cdrom/ lrwxrwxrwx 1 hyde users 10 2005-01-30 19:44 e:: -> /dev/cdrom lrwxrwxrwx 1 hyde users 20 2005-01-31 16:19 f: -> /home/hyde/winetools/ lrwxrwxrwx 1 hyde users 11 2005-01-30 19:44 f:: -> /dev/dvdram lrwxrwxrwx 1 hyde users 10 2005-01-30 19:44 g: -> /media/sr1/ lrwxrwxrwx 1 hyde users 8 2005-01-30 19:44 g:: -> /dev/sr1 lrwxrwxrwx 1 hyde users 10 2005-01-30 19:44 h: -> /home/hyde/ lrwxrwxrwx 1 hyde users 8 2005-01-30 19:44 lpt1 -> /dev/lp0 lrwxrwxrwx 1 hyde users...

any one knows how to INSTALL assassins Creed2?? when i run the installation file with WINE it says There is no windows program configured to open this type of file. can some one help please? this happens when i run the setup.exe and the autprun is not working well Btw the DvD is duallayer first when i inserted the DvD into the normal DvD rom it dint work well. this time it works but it says that

Hey all, Just downloaded the new Xen 4.0 and ran Make xen Make tools Make stubdom Copied the new files from dist/install Im already running pv_ops 2.6.31.6 kernel. When I boot i get (XEN) Panic on CPU 0: (XEN) IO-APIC + timer doesn''t work! I have tried booting with noapic boot option but makes no difference. The system worked fine on 3.4.2 CPU is AMD.

...4: chipset revision 1 PIIX4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:DMA, hdd:DMA -hda: IBM-DTLA-305040, ATA DISK drive -ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 -hdc: HL-DT-ST DVDRAM GSA-4040B, ATAPI CD/DVD-ROM drive -hdd: LG CD-RW CED-8080B, ATAPI CD/DVD-ROM drive -ide1 at 0x170-0x177,0x376 on irq 15 -hda: max request size: 128KiB -hda: 80418240 sectors (41174 MB) w/380KiB Cache, CHS=65535/16/63, UDMA(33) - hda: hda1 hda2 < hda5 hda6 hda7 > hda4 -hdc: ATAPI 32X DVD-ROM D...

...0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounter "TSC" frequency 2079563677 Hz quality 800 Timecounters tick every 1.000 msec ad0: 38166MB <Seagate ST340823A 3.32> at ata0-master UDMA100 acd0: DVDROM <TOSHIBA DVD-ROM SD-M1612/1004> at ata0-slave UDMA33 acd1: DVDR <HL-DT-ST DVDRAM GSA-4081B/A100> at ata1-slave UDMA33 ad4: 152627MB <Seagate ST3160021A 8.01> at ata2-master UDMA100 ad5: 152627MB <Seagate ST3160021A 8.01> at ata2-slave UDMA100 ad6: 152627MB <Seagate ST3160021A 8.01> at ata3-master UDMA100 cd1 at ata1 bus 0 target 1 lun 0 cd1: <HL-DT-ST DV...

Over the weekend, I had to make a technical support call on one of my DVD burners, and at one point the recorded message mentioned I should have my serial number handy. I thought there was a way to read that from at least one piece of software on the system, but I couldn't remember one and man -k on a number of subjects was unrevealing. Can someone enlighten me (us)? Thanks. mhr

...size: 297GiB capacity: 297GiB capabilities: primary multi lvm2 *-scsi:1 physical id: 2 logical name: scsi1 capabilities: emulated *-cdrom description: DVD-RAM writer product: DVDRAM GT50N vendor: HL-DT-ST physical id: 0.0.0 bus info: scsi at 1:0.0.0 logical name: /dev/cdrom logical name: /dev/cdrw logical name: /dev/dvd logical name: /dev/dvdrw logical name: /dev/scd...

...roller pci at 0000:00:1e.0 bridge 82801 PCI Bridge pci at 0000:00:1f.0 bridge 82801JIB (ICH10) LPC Interface Controller pci at 0000:00:1f.2 scsi2 storage 82801JI (ICH10 Family) 4 port SATA IDE Co scsi at 2:0.0.0 /dev/cdrom disk DVDRAM GH20NS10 scsi at 3:0.0.0 /dev/sda disk 1TB ST31000524AS scsi at 3:0.0.0,1 /dev/sda1 volume 500MiB EXT4 volume scsi at 3:0.0.0,2 /dev/sda2 volume 931GiB Linux LVM Physical Volume partitio pci at 0000:00:1f.3 bus 82801JI (ICH10 Famil...

...#39; unit='0'/> </hostdev> I've booted the vm and saw the cdrom in the vm, eject worked and so did mount. I've decided to move it to another machine running libvirt 6.7.0, I've verified the cdrom is visible on the new system, seE: # lsscsi [0:0:0:0] cd/dvd HL-DT-ST DVDRAM GH24NSD1 LW00 /dev/sr0 I've inserted the same xml into another vm running libreelec uefi but changed the host from 11 to 0, it looks like this: <controller type='scsi' index='0' model='virtio-scsi'> <alias name='scsi0'/> <address type='p...

...rallel I/O> on ppbus0 ppc0: [GIANT-LOCKED] ppc0: [ITHREAD] Timecounter "TSC" frequency 1585747239 Hz quality 800 Timecounters tick every 1.000 msec Waiting 5 seconds for SCSI devices to settle ad0: 305244MB <Seagate ST3320620A 3.AAF> at ata0-master UDMA100 acd0: DVDR <HL-DT-ST DVDRAM GSA-4163B/A106> at ata1-master UDMA33 aacd0: <RAID 5> on aac0 aacd0: 953812MB (1953406976 sectors) sa0 at ahc0 bus 0 target 3 lun 0 sa0: <HP Ultrium 1-SCSI N15G> Removable Sequential Access SCSI-3 device sa0: 20.000MB/s transfers (10.000MHz, offset 8, 16bit) Trying to mount root from...

...me\Winamp hardware: + Audio-, Video- und Gamecontroller - Audiocodecs - Legacy-Audiotreiber - Legacy-Videoaufnahmeger?t - Mediensteuerungsger?t - SoundMAX Integrated Digital Audio (driver 5.12.1.3620) - Videocodecs + Computer - ACPI-Uniprozessor-PC + DVD/CD-ROM-Laufwerke - _NEC DV-5800C - HL-DT-ST DVDRAM GSA-4040B - PQ4304A UWC214J SCSI CdRom Device + Grafikkarte - RADEON 9600 SERIES (driver 8.252.0.0) - RADEON 9600 SERIES - Secondary (driver 8.252.0.0) + IDE ATA/ATAPI-Controller - Prim?rer IDE-Kanal - Sekund?rer IDE-Kanal - VIA Bus-Master-IDE-Controller + Laufwerke - SAMSUNG HA250JC - SAMSUNG HD50...

I have just recently (physically) moved a system with 16 hard drives (for the array) and 1 OS drive; and in doing so, I needed to pull out the 16 drives so that it would be light enough for me to lift. When I plugged the drives back in, initially, it went into a panic-reboot loop. After doing some digging, I deleted the file /etc/zfs/zpool.cache. When I try to import the pool using the zpool