search for: dump_device_desc

Here are all the usbconfig outputs you have requested. I have left a message with the Dev for NAS4Free to give up the ./configure for NUT portion.? I am hoping they will... usbconfig -u 0 -a 5 dump_device_desc? datanas: ~# usbconfig -u 0 -a 5 dump_device_desc ugen0.5: <TRIPP LITE UPS Tripp Lite> at usbus0, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON (100mA)? bLength = 0x0012 ? bDescriptorType = 0x0001 ? bcdUSB = 0x0110 ? bDeviceClass = 0x0000? <Probed by interface class> ? bDeviceSubClass = 0x0000...

# usbconfig -d ugen0.2 dump_device_desc ugen0.2: <TRIPP LITE SMART1500RMXL2Ua TRIPP LITE> at usbus0, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON (60mA) bLength = 0x0012 bDescriptorType = 0x0001 bcdUSB = 0x0110 bDeviceClass = 0x0000 <Probed by interface class> bDeviceSubClass = 0x0000 bDeviceProtocol = 0x0000 bMaxPa...

Hello everyone, I have a Tripp-Lite UPS (smart1500rmxl2ua) I'm trying to get working with nut. This is a FreeBSD 10.3 box. I've tried using the usbhid-ups<http://networkupstools.org/docs/man/usbhid-ups.html> driver but everytime I try to start up nut, I get this: # upsdrvctl start Network UPS Tools - UPS driver controller 2.7.4 Network UPS Tools - Generic HID driver 0.41 (2.7.4)

> What does that revision number correspond to in FreeBSD release numbers? (e.g. 9.3, 10.0) FreeBSD 10.2-RELEASE #0 r286738M the last person probably wasn't able to give the ./configure probably because most people uses the precompiled iso to install NAS4Free.? if you need the ./configure I might have to look for their source on GitHub or something. /usr/local/libexec/nut/usbhid-ups -a

...! On Tuesday, August 18, 2015 10:05 AM, Johnny Wong <e430benz98 at yahoo.com> wrote: Here are all the usbconfig outputs you have requested. I have left a message with the Dev for NAS4Free to give up the ./configure for NUT portion.? I am hoping they will... usbconfig -u 0 -a 5 dump_device_desc? datanas: ~# usbconfig -u 0 -a 5 dump_device_desc ugen0.5: <TRIPP LITE UPS Tripp Lite> at usbus0, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON (100mA)? bLength = 0x0012 ? bDescriptorType = 0x0001 ? bcdUSB = 0x0110 ? bDeviceClass = 0x0000? <Probed by interface class> ? bDeviceSubClass = 0x0000...

Hello, I need help configuring my USB connected UPS "Emerson Power Liebert PowerSure PSI 1440" to my freebsd machine, using NUT. here's the manufacturer's product page http://www.emersonnetworkpower.com/en-US/Products/ACPower/Pages/LiebertPowerSurePSILineInteractiveUPS10003000VA.aspx I'm not a BSD expert, so please ask me for any information you need. regards Daniele

...+nick=smartfox.us at lists.alioth.debian.org] on behalf of Nick Teague [nick.teague at smartfox.us] Sent: Wednesday, October 12, 2016 9:15 AM To: Charles Lepple Cc: nut-upsuser at lists.alioth.debian.org Subject: Re: [Nut-upsuser] Unable to find driver for a supported device # usbconfig -d ugen0.2 dump_device_desc ugen0.2: <TRIPP LITE SMART1500RMXL2Ua TRIPP LITE> at usbus0, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON (60mA) bLength = 0x0012 bDescriptorType = 0x0001 bcdUSB = 0x0110 bDeviceClass = 0x0000 <Probed by interface class> bDeviceSubClass = 0x0000 bDeviceProtocol = 0x0000 bMaxPa...

...] > ugen1.3: <USB UPS PPC> at usbus1, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON > > > The last line I guess is key. Unfortunately, it is not very unique: the vendor can pick the string "USB UPS PPC", but the drivers match on the numeric IDs. Try 'usbconfig -d ugen1.3 dump_device_desc' > I did try all the diff combinations from the chart below > to no avail..... "no avail" is not one of our error messages... I just checked :-) What was the error message from blazer_usb? > and they are using a USB cable/port..... see below. > Thx for any leads. &gt...

Dear Charles, thanks for your quick answer and your information! I didn't know there is a difference in the PR-series between old and new. So thanks for this valuable information! usbconfig dump_device_desc shows: ugen0.2: <CyberPower Systems product 0x0601> at usbus0, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON (50mA) bLength = 0x0012...

...ILineInteractiveUPS10003000VA.aspx > > > > I'm not a BSD expert, so please ask me for any information you need. > > For starters, what version of FreeBSD and NUT are you trying this with? > > Some versions will return information for all USB devices via "usbconfig dump_device_desc" run as root. > > Or you can install the sysutils/usbutils port, and run lsusb (also as root) to be able to directly compare the output to a Linux system. > > -- > Charles Lepple > clepple at gmail > > > > -- Charles Lepple A: Because it messes up the ord...

Hey guys, :) recently, I installed Cyberpower PR2200ELCDRT2U, however, I have not managed to get this UPS working with FreeNAS 11, yet. According to compatibility list, PR2200 should work fine, when using powerpanel driver: http://networkupstools.org/ddl/Cyber_Power_Systems/ http://networkupstools.org/ddl/Cyber_Power_Systems/PR2200.html However, when trying to establish a connection between

Thx for the info Charles. Here is what I am seeing from 'usbconfig list' ugen0.1: <EHCI root HUB Intel> at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE ugen1.1: <EHCI root HUB Intel> at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE ugen0.2: <product 0x0024 vendor 0x8087> at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE ugen1.2: <product 0x0024 vendor

...martfox.us> wrote: > > ugen0.2: <TRIPP LITE SMART1500RMXL2Ua TRIPP LITE> at usbus0, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON (60mA) To determine the proper driver, would you please run the following usbconfig command as root? Here's an example from my UPS: # usbconfig -d ugen0.2 dump_device_desc ugen0.2: <Evolution MGE UPS SYSTEMS> at usbus0, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON (20mA) bLength = 0x0012 bDescriptorType = 0x0001 bcdUSB = 0x0110 bDeviceClass = 0x0000 bDeviceSubClass = 0x0000 bDeviceProtocol = 0x0000 bMaxPacketSize0 = 0x0008 idVendor = 0x0463...

...HID descriptor length 878 > 5.279939 Unable to get Report descriptor: Input/output error My other concern is that FreeBSD might not allow the method that we use to retrieve the Report Descriptor. What do the following commands return (need to run them as root)? usbconfig -u 0 -a 5 dump_device_desc usbconfig -u 0 -a 5 dump_curr_config_desc usbconfig -u 0 -a 5 do_request 0x81 0x06 0x2200 0 0x100 (I'm guessing on "-u 0 -a 5" based on .../dev/ugen0.5 -- that might change if the UPS USB cable is unplugged and re-inserted.) > cat /var/etc/ups.conf > [upstl1300] > d...

Hello guys, I have to manage an Eaton Ellipse ASR 750 VA UPS under a FreeBSD 8.2 server. I used nut from ports collection but I'm unable to detect the UPS by USB cable. Here is the output of 'usbconfig -u 4 -a 2 dump_device_desc' : ugen4.2: <ELLIPSE EATON> at usbus4, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON bLength = 0x0012 bDescriptorType = 0x0001 bcdUSB = 0x0110 bDeviceClass = 0x0000 bDeviceSubClass = 0x0000 bDeviceProtocol = 0x0000 bMaxPacketSize0 = 0x0008 idVendor = 0x0463 idProduct =...

...sing powerpanel driver: > http://networkupstools.org/ddl/Cyber_Power_Systems/ > http://networkupstools.org/ddl/Cyber_Power_Systems/PR2200.html Looking at the PR6000LCD... entry, it looks like PR*LCD models might be different than the older PR* ones. What do you get from "sudo usbconfig dump_device_desc"? (You can trim any non-UPS data - I'm mostly interested in idVendor and idProduct. Also, if you don't want to share the full serial number, it would be good to know how many characters there are.) I suspect this UPS will work with the usbhid-ups driver, or if not, it can be made to w...

...t; > thanks for your quick answer and your information! I didn't know there is a difference in the PR-series between old and new. So thanks for this valuable information! Just a lucky guess :-) We tend not to know about changes like this until someone reports an issue. > > usbconfig dump_device_desc shows: > > ugen0.2: <CyberPower Systems product 0x0601> at usbus0, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON (50mA) > > bLength = 0x0012...

...spx >> > >> > I'm not a BSD expert, so please ask me for any information you need. >> >> For starters, what version of FreeBSD and NUT are you trying this with? >> >> Some versions will return information for all USB devices via "usbconfig >> dump_device_desc" run as root. >> >> Or you can install the sysutils/usbutils port, and run lsusb (also as >> root) to be able to directly compare the output to a Linux system. >> >> -- >> Charles Lepple >> clepple at gmail >> >> >> >> > >...

...56? ? HID descriptor length 878 >? ? 5.279939? ? Unable to get Report descriptor: Input/output error My other concern is that FreeBSD might not allow the method that we use to retrieve the Report Descriptor. What do the following commands return (need to run them as root)? usbconfig -u 0 -a 5 dump_device_desc usbconfig -u 0 -a 5 dump_curr_config_desc usbconfig -u 0 -a 5 do_request 0x81 0x06 0x2200 0 0x100 (I'm guessing on "-u 0 -a 5" based on .../dev/ugen0.5 -- that might change if the UPS USB cable is unplugged and re-inserted.) > cat /var/etc/ups.conf > [upstl1300] >? ? ? ? dr...

...> at usbus1, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON >> >> >> The last line I guess is key. > > Unfortunately, it is not very unique: the vendor can pick the string > "USB UPS PPC", but the drivers match on the numeric IDs. > Try 'usbconfig -d ugen1.3 dump_device_desc' > >> I did try all the diff combinations from the chart below >> to no avail..... > > "no avail" is not one of our error messages... I just checked :-) > > What was the error message from blazer_usb? > >> and they are using a USB cable/port..... &g...