search for: drbd0

...utomount, either. I've rebooted this thing a few times in the 18 months or so its been running... not always cleanly... anyways, I'm started a drbd verify (from the slave) about 10 hours ago, it has 15 hours more to run, and so far it's logged... Oct 11 13:58:26 sg2 kernel: block drbd0: Starting Online Verify from sector 3534084704 Oct 11 14:00:23 sg2 kernel: block drbd0: [drbd0_worker/2197] sock_sendmsg time expired, ko = 4294967295 Oct 11 14:00:29 sg2 kernel: block drbd0: [drbd0_worker/2197] sock_sendmsg time expired, ko = 4294967294 Oct 11 14:00:35 sg2 kernel: block drbd0:...

...; (ocfs2rec,3643,0):ocfs2_begin_quota_recovery:407 Beginning quota recovery in > slot 1 > Apr 1 12:07:19 ubu10a kernel: [ 1352.902509] > (ocfs2_wq,1213,0):ocfs2_finish_quota_recovery:598 Finishing quota recovery in > slot 1 > > Apr 1 12:07:20 ubu10a kernel: [ 1354.423915] block drbd0: Handshake > successful: Agreed network protocol version 94 > Apr 1 12:07:20 ubu10a kernel: [ 1354.433074] block drbd0: Peer authenticated > using 20 bytes of 'sha1' HMAC > Apr 1 12:07:20 ubu10a kernel: [ 1354.433083] block drbd0: conn( WFConnection > -> WFReportParams )...

...:21 CEST 2006 (build d647396d7a65bfeeaad84fa736d4dd1c) OCFS2 DLM 1.2.1 Tue Jun 6 13:24:21 CEST 2006 (build 70adfba8f7c9ce44dac2d47ec99bb7d2) OCFS2 DLMFS 1.2.1 Tue Jun 6 13:24:21 CEST 2006 (build 70adfba8f7c9ce44dac2d47ec99bb7d2) OCFS2 User DLM kernel interface loaded eth0: no IPv6 routers present drbd0: disk( Diskless -> Attaching ) drbd0: drbd_bm_resize called with capacity == 351555584 drbd0: resync bitmap: bits=43944448 words=1373264 drbd0: size = 167 GB (175777792 KB) drbd0: reading of bitmap took 152 jiffies drbd0: recounting of set bits took additional 8 jiffies drbd0: 0 KB marked out-o...

Hi all. I have two hosts with drbd: kmod-drbd83-8.3.8-1.el5.centos drbd83-8.3.8-1.el5.centos and kernel (CentOS 5.7): 2.6.18-308.4.1.el5 After a recent upgrade of kernel I have had two sitiuations when my ext3 filesystem on /dev/drbd0 became read-only. I've checked disks with smartctl -t long, they are ok. There are no messages with disks problems in /var/log/messages | dmesg. I've made fsck tonight but 3 hours after it has finished the problem repeated once more (under heavy load). /var/log/messages: May 6 06:22:27 s...

...nel-module-drbd-2.6.9-34.EL to match my kernel. The problem I have is that on 1 machine drbd works fine, but when I start drbd on the other I get an error: Starting DRBD resources: [ d0 ioctl(,SET_DISK_CONFIG,) failed: Invalid argument Lower device is already mounted. cmd /sbin/drbdsetup /dev/drbd0 disk /dev/hde1 internal -1 failed! It is not mounted as far as I can tell - df -a only shows /dev/hda and fstab has no entry for /dev/hde1. I have also tried deleting the partion with parted and recreating it. I have also tried using just /dev/hde. The /etc/drbd.conf is: resource drbd0 { pro...

...cted -> NetworkFailure ) pdsk( UpToDate -> DUnknown ) Jul 3 10:58:37 web1 kernel: d-con r0: asender terminated Jul 3 10:58:37 web1 kernel: d-con r0: Terminating asender thread Jul 3 10:58:37 web1 kernel: d-con r0: error receiving Data, e: -5 l: 4096! Jul 3 10:58:37 web1 kernel: block drbd0: new current UUID A69EE0FA8CB9B85D:C9BABEF0844508EB:2F0151CEDDA9713A:2F0051CEDDA9713B Jul 3 10:58:37 web1 kernel: d-con r0: Connection closed Jul 3 10:58:37 web1 kernel: d-con r0: conn( NetworkFailure -> Unconnected ) Jul 3 10:58:37 web1 kernel: d-con r0: receiver terminated Jul 3 10:58...

Hi! I found a similar problem in an user maillist about my problem, but didnt work here. Im using a CentOS 5.2, with a Xen 2.6.18 kernel and a compiled Drbd 8. So, a load a ocfs2 module and use the mkfs.ocfs2 successfully with /dev/drbd0 But, when i try to mount it a take this log: # mount.ocfs2 /dev/drbd0 /mnt mount.ocfs2: I/O error on channel while trying to join the group # tail /var/log/messages Feb 9 18:11:08 tundra kernel: (31249,0):o2hb_setup_one_bio:290 ERROR: Error adding page to bio i = 7, vec_len = 4096, len = 0 Feb...

...fter-sb "echo o > /proc/sysrq-trigger ; halt -f"; local-io-error "echo 0 > /proc/sysrq-trigger ; halt - f"; outdate-peer "/usr/lib64/heartbeat/drbd-peer-outdater"; } on xenhostA { device /dev/drbd0; disk /dev/sda3; address 172.16.0.30:7788; meta-disk internal; } on xenhostB { device /dev/drbd0; disk /dev/sda3; address 172.16.0.31:7788; meta-disk internal;...

...S2 or GFS. The environment is a Centos 5.3 with DRBD82 (but also tried with DRBD83 from testing) . Setting up a single primary disk and running bonnie++ on it works. Setting up a dual-primary disk, only mounting it on one node (ext3) and running bonnie++ works When setting up ocfs2 on the /dev/drbd0 disk and mounting it on both nodes, basic functionality seems in place but usually less than 5-10 minutes after I start bonnie++ as a test on one of the nodes , both nodes power cycle with no errors in the logfiles, just a crash. When at the console at the time of crash it looks like a disk IO (y...

...S2 or GFS. The environment is a Centos 5.3 with DRBD82 (but also tried with DRBD83 from testing) . Setting up a single primary disk and running bonnie++ on it works. Setting up a dual-primary disk, only mounting it on one node (ext3) and running bonnie++ works When setting up ocfs2 on the /dev/drbd0 disk and mounting it on both nodes, basic functionality seems in place but usually less than 5-10 minutes after I start bonnie++ as a test on one of the nodes , both nodes power cycle with no errors in the logfiles, just a crash. When at the console at the time of crash it looks like a disk IO (y...

...57] BUG: unable to handle kernel paging request at ffff880025f19000 Log: [256820.643918] xen-blkback:ring-ref 772, event-channel 16, protocol 1 (x86_64-abi) [256830.802492] vif86.0: no IPv6 routers present [256835.674481] br-vlan111: port 2(vif86.0) entering forwarding state [257035.389461] block drbd0: peer( Secondary -> Primary ) [257035.404098] block drbd2: peer( Secondary -> Primary ) [257035.431535] block drbd1: peer( Secondary -> Primary ) [257199.267429] br-vlan111: port 2(vif86.0) entering forwarding state [257199.267622] device vif86.0 left promiscuous mode [257199.267664] br-vl...

...oblem with drbd 0.7.10 module on an xenU OS (testing). I''ve compiling drbd with "make clean all" then "make install" without error. modprobe drbd OK with no error too and now and trying to start drdb /etc/init.d/drbd start Starting DRBD resources: can not open /dev/drbd0: No such device or address [ d0 can not open /dev/drbd0: No such device or address cmd /sbin/drbdsetup /dev/drbd0 disk /dev/sda2 internal -1 --on-io-error=detach failed! Nothing on dmesg ################# Config : ################# xen0-testing 2.6.11 64M Ram based on debian sarge xenU-testing...

...x and Kernel Version is 2.6.32-71.el6.i686 and DRBD Version is 8.3.10 DRBD is build from source and Configured DRBD with 2 Node testing with Simplex Setup Server 1 : 192.168.13.131 IP Address and hostname is primary Server 2 : 192.168.13.132 IP Address and hostname is secondary Finally found that drbd0, drbd1 mount failed problem *Found some error messages in "dmesg"* block drbd0: role( Secondary -> Primary ) block drbd1: role( Secondary -> Primary ) EXT4-fs (drbd0): bad geometry: block count 5242880 exceeds size of device (5242711 blocks) EXT4-fs (drbd1): bad geometry: block...

...storage server replicating partition with DRBD 2) exporting via GNBD from the primary server the drbd with GFS2 3) inporting the GNBD on some nodes and mount it with GFS2 Assuming no logical error are done in the last points logic this is the situation: Server 1: LogVol09, DRDB configured as /dev/drbd0 replicated to Server 2. DRBD seems to work perfect as cat /proc/drbd Server 2: LogVol09, Secondary for /dev/drbd, cat /proc/drbd is ok What i thought to do was to export via GNBD the /dev/drbd0 to import it on a couple of nodes. Using GFS2 as FS for concurrent usage. I got to format the GFS2 FS o...

Hi, I am trying to (live-)migrate a paravirtualized machine from hosta to hostb: -----8<---- hosta:~ # xm list pvm Name ID Mem VCPUs State Time(s) pvm 64 384 1 -b---- 0.5 hostb:~ # xm list pvm Error: Domain ''pvm'' does not exist. hosta:~ # xm migrate pvm 192.168.0.2 Error:

Hello We have an ocfs2 1.6 via drbd dual master. drbd0 -> sda7 (node1) drbd0 -> sda7 (node2) ocfs2 1.6 2.6.38-2-amd64 kernel panic when unmount. when unmount drbd0 on both node around the same time using dsh. umount -v /dev/drbd0 the umount process hangs for a while, 30mins or so pts/0 D+ 20:50 0:00 umount /dev/drbd0 -vvvvv Then, on...

Hello list, If i take a drbd over two hosts configured as dual primary, i can access files via ocfs2 from both sides. For this, on both sides i'ld have to mount the ocfs2-partition locally and both sides have their own ocfs-DLM, as far as i understood? So in Detail: 1. /dev/drbd0 configured in dual primary, taking one partition from each host 2. drbd0 is ocfs2 formatted 3. ocfs2-tools are started on each host 4. Host A has got drbd0 mounted, Host B has got drbd0 mounted. This means, both mount drbd0 from "localhost", over their local DLM-daemon(?) So now, this ca...

...nts (tested from Windows and smbclient). The quotasystem in use is the new quota format on an ext4 filesystem. Using the highest loglevel for quota I get the following: [2011/05/30 18:22:02.624179, 3] lib/sysquotas.c:453(sys_get_quota) sys_get_vfs_quota() failed for mntpath[/storage] bdev[/dev/drbd0] qtype[2] id[15005]: Operation not permitted [2011/05/30 18:22:02.624569, 3] lib/sysquotas.c:453(sys_get_quota) sys_get_vfs_quota() failed for mntpath[/storage] bdev[/dev/drbd0] qtype[4] id[1800]: Operation not permitted and here is what stracing the samba daemon when doing "du" in s...

Hi list. I am dealing with DRBD (+GFS as its DLM). GFS configuration needs a CLVMD configuration. So, after syncronized my (two) /dev/drbd0 block devices, I start the clvmd service and try to create a clustered logical volume. I get this: On "alice": [root at alice ~]# pvcreate /dev/drbd0 Physical volume "/dev/drbd0" successfully created [root at alice ~]# vgcreate testvol /dev/drbd0 Clustered volume group &q...

...master, so that was the first thing to notice network issues. Just a couple days ago I ran yum update to the latest, I do this about once a month. /var/log/messages logged... (prior to this was nothing but normal smbd complaining about CUPS not configured). May 9 22:30:21 sg1 kernel: block drbd0: PingAck did not arrive in time. May 9 22:30:21 sg1 kernel: block drbd0: peer( Secondary -> Unknown ) conn( Connected -> NetworkFailure ) pdsk( UpToDate -> DUnknown ) May 9 22:30:21 sg1 kernel: block drbd0: asender terminated May 9 22:30:21 sg1 kernel: block drbd0: Terminating drbd0_as...