Displaying 20 results from an estimated 25 matches for "domain_rang".
Did you mean:
domain_range
2019 Jul 22
3
[PATCH] iommu/virtio: Update to most recent specification
Following specification review a few things were changed in v8 of the
virtio-iommu series [1], but have been omitted when merging the base
driver. Add them now:
* Remove the EXEC flag.
* Add feature bit for the MMIO flag.
* Change domain_bits to domain_range.
* Add NOMEM status flag.
[1] https://lore.kernel.org/linux-iommu/20190530170929.19366-1-jean-philippe.brucker at arm.com/
Fixes: edcd69ab9a32 ("iommu: Add virtio-iommu driver")
Reported-by: Eric Auger <eric.auger at redhat.com>
Signed-off-by: Jean-Philippe Brucker <jean-phili...
2019 Jul 22
3
[PATCH] iommu/virtio: Update to most recent specification
Following specification review a few things were changed in v8 of the
virtio-iommu series [1], but have been omitted when merging the base
driver. Add them now:
* Remove the EXEC flag.
* Add feature bit for the MMIO flag.
* Change domain_bits to domain_range.
* Add NOMEM status flag.
[1] https://lore.kernel.org/linux-iommu/20190530170929.19366-1-jean-philippe.brucker at arm.com/
Fixes: edcd69ab9a32 ("iommu: Add virtio-iommu driver")
Reported-by: Eric Auger <eric.auger at redhat.com>
Signed-off-by: Jean-Philippe Brucker <jean-phili...
2020 Aug 05
0
[PATCH v3 36/38] virtio-iommu: convert to LE accessors
...feature(vdev, VIRTIO_IOMMU_F_INPUT_RANGE,
- struct virtio_iommu_config, input_range.end,
- &input_end);
+ virtio_cread_le_feature(vdev, VIRTIO_IOMMU_F_INPUT_RANGE,
+ struct virtio_iommu_config, input_range.end,
+ &input_end);
- virtio_cread_feature(vdev, VIRTIO_IOMMU_F_DOMAIN_RANGE,
- struct virtio_iommu_config, domain_range.start,
- &viommu->first_domain);
+ virtio_cread_le_feature(vdev, VIRTIO_IOMMU_F_DOMAIN_RANGE,
+ struct virtio_iommu_config, domain_range.start,
+ &viommu->first_domain);
- virtio_cread_feature(vdev, VIRTIO_IOMMU_F_DOMA...
2019 Jul 22
0
[PATCH] iommu/virtio: Update to most recent specification
...pe Brucker wrote:
> Following specification review a few things were changed in v8 of the
> virtio-iommu series [1], but have been omitted when merging the base
> driver. Add them now:
>
> * Remove the EXEC flag.
> * Add feature bit for the MMIO flag.
> * Change domain_bits to domain_range.
> * Add NOMEM status flag.
>
> [1] https://lore.kernel.org/linux-iommu/20190530170929.19366-1-jean-philippe.brucker at arm.com/
>
> Fixes: edcd69ab9a32 ("iommu: Add virtio-iommu driver")
> Reported-by: Eric Auger <eric.auger at redhat.com>
> Signed-off-by: J...
2019 Jul 22
0
[PATCH] iommu/virtio: Update to most recent specification
...pe Brucker wrote:
> Following specification review a few things were changed in v8 of the
> virtio-iommu series [1], but have been omitted when merging the base
> driver. Add them now:
>
> * Remove the EXEC flag.
> * Add feature bit for the MMIO flag.
> * Change domain_bits to domain_range.
> * Add NOMEM status flag.
>
> [1] https://lore.kernel.org/linux-iommu/20190530170929.19366-1-jean-philippe.brucker at arm.com/
>
> Fixes: edcd69ab9a32 ("iommu: Add virtio-iommu driver")
> Reported-by: Eric Auger <eric.auger at redhat.com>
> Signed-off-by:...
2020 Apr 13
0
[PATCH v2 1/3] iommu/virtio: Add topology description to virtio-iommu config space
...ns on offset? E.g. alignment?
> + __le32 num_items;
> + __le32 item_length;
> +};
> +
> struct virtio_iommu_config {
> /* Supported page sizes */
> __le64 page_size_mask;
> @@ -36,6 +43,25 @@ struct virtio_iommu_config {
> struct virtio_iommu_range_32 domain_range;
> /* Probe buffer size */
> __le32 probe_size;
> + struct virtio_iommu_topo_config topo_config;
> +};
> +
> +#define VIRTIO_IOMMU_TOPO_PCI_RANGE 0x1
> +#define VIRTIO_IOMMU_TOPO_ENDPOINT 0x2
> +
> +struct virtio_iommu_topo_pci_range {
> + __le16 type;...
2020 Aug 03
0
[PATCH v2 12/24] virtio_iommu: correct tags for config space fields
...end;
+ __le32 start;
+ __le32 end;
};
struct virtio_iommu_config {
/* Supported page sizes */
- __u64 page_size_mask;
+ __le64 page_size_mask;
/* Supported IOVA range */
struct virtio_iommu_range_64 input_range;
/* Max domain ID size */
struct virtio_iommu_range_32 domain_range;
/* Probe buffer size */
- __u32 probe_size;
+ __le32 probe_size;
};
/* Request types */
--
MST
2020 Aug 05
0
[PATCH v3 12/38] virtio_iommu: correct tags for config space fields
...end;
+ __le32 start;
+ __le32 end;
};
struct virtio_iommu_config {
/* Supported page sizes */
- __u64 page_size_mask;
+ __le64 page_size_mask;
/* Supported IOVA range */
struct virtio_iommu_range_64 input_range;
/* Max domain ID size */
struct virtio_iommu_range_32 domain_range;
/* Probe buffer size */
- __u32 probe_size;
+ __le32 probe_size;
};
/* Request types */
--
MST
2020 Aug 21
0
[PATCH v3 4/6] iommu/virtio: Add topology definitions
...* (virtio_iommu_topo_*) from the start of the virtio_iommu config
+ * space. Aligned on 8 bytes.
+ */
+ __le16 offset;
+};
+
struct virtio_iommu_config {
/* Supported page sizes */
__le64 page_size_mask;
@@ -36,6 +48,38 @@ struct virtio_iommu_config {
struct virtio_iommu_range_32 domain_range;
/* Probe buffer size */
__le32 probe_size;
+ struct virtio_iommu_topo_config topo_config;
+};
+
+#define VIRTIO_IOMMU_TOPO_PCI_RANGE 0x1
+#define VIRTIO_IOMMU_TOPO_MMIO 0x2
+
+struct virtio_iommu_topo_pci_range {
+ /* VIRTIO_IOMMU_TOPO_PCI_RANGE */
+ __u8 type;
+ __u8 reserved...
2019 May 30
10
[PATCH v8 0/7] Add virtio-iommu driver
Implement the virtio-iommu driver, following specification v0.12 [1].
Since last version [2] we've worked on improving the specification,
which resulted in the following changes to the interface:
* Remove the EXEC flag.
* Add feature bit for the MMIO flag.
* Change domain_bits to domain_range.
Given that there were small changes to patch 5/7, I removed the review
and test tags. Please find the code at [3].
[1] Virtio-iommu specification v0.12, sources and pdf
git://linux-arm.org/virtio-iommu.git virtio-iommu/v0.12
http://jpbrucker.net/virtio-iommu/spec/v0.12/virtio-iommu-v0.1...
2020 Mar 11
0
[PATCH] iommu/virtio: Fix sparse warning
...end;
+ __u32 start;
+ __u32 end;
};
struct virtio_iommu_config {
/* Supported page sizes */
- __le64 page_size_mask;
+ __u64 page_size_mask;
/* Supported IOVA range */
struct virtio_iommu_range_64 input_range;
/* Max domain ID size */
struct virtio_iommu_range_32 domain_range;
/* Probe buffer size */
- __le32 probe_size;
+ __u32 probe_size;
};
/* Request types */
--
2.25.1
2019 May 30
0
[PATCH v8 5/7] iommu: Add virtio-iommu driver
...v, VIRTIO_IOMMU_F_INPUT_RANGE,
+ struct virtio_iommu_config, input_range.start,
+ &input_start);
+
+ virtio_cread_feature(vdev, VIRTIO_IOMMU_F_INPUT_RANGE,
+ struct virtio_iommu_config, input_range.end,
+ &input_end);
+
+ virtio_cread_feature(vdev, VIRTIO_IOMMU_F_DOMAIN_RANGE,
+ struct virtio_iommu_config, domain_range.start,
+ &viommu->first_domain);
+
+ virtio_cread_feature(vdev, VIRTIO_IOMMU_F_DOMAIN_RANGE,
+ struct virtio_iommu_config, domain_range.end,
+ &viommu->last_domain);
+
+ viommu->geometry = (struct iommu_domain...
2019 Nov 22
0
[RFC virtio 12/13] virtio-iommu: Add built-in topology description
...(6)]
+ Topology description is available at \field{topo_offset}.
\end{description}
\drivernormative{\subsubsection}{Feature bits}{Device Types / IOMMU Device / Feature bits}
@@ -97,6 +100,7 @@ \subsection{Device configuration layout}\label{sec:Device Types / IOMMU Device /
le32 end;
} domain_range;
le32 probe_size;
+ le16 topo_offset;
};
\end{lstlisting}
@@ -141,6 +145,90 @@ \subsection{Device initialization}\label{sec:Device Types / IOMMU Device / Devic
If the driver does not accept the VIRTIO_IOMMU_F_BYPASS feature, the
device SHOULD NOT let endpoints access the guest-physical a...
2019 Nov 22
1
[RFC 13/13] iommu/virtio: Add topology description to
...IO_IOMMU_F_BYPASS 3
> #define VIRTIO_IOMMU_F_PROBE 4
> #define VIRTIO_IOMMU_F_MMIO 5
> +#define VIRTIO_IOMMU_F_TOPOLOGY 6
>
> struct virtio_iommu_range_64 {
> __le64 start;
> @@ -36,6 +37,31 @@ struct virtio_iommu_config {
> struct virtio_iommu_range_32 domain_range;
> /* Probe buffer size */
> __le32 probe_size;
> + /* Offset to the beginning of the topology table */
> + __le16 topo_offset;
why do we need an offset?
> +};
> +
> +struct virtio_iommu_topo_head {
> + __le16 type;
> + __le16 next;
> +};
So thi...
2020 Mar 01
0
[PATCH v2 1/3] iommu/virtio: Add topology description to virtio-iommu config space
...ig {
> + __le32 offset;
> + __le32 num_items;
> + __le32 item_length;
> +};
> +
> struct virtio_iommu_config {
> /* Supported page sizes */
> __le64 page_size_mask;
> @@ -36,6 +43,25 @@ struct virtio_iommu_config {
> struct virtio_iommu_range_32 domain_range;
> /* Probe buffer size */
> __le32 probe_size;
> + struct virtio_iommu_topo_config topo_config;
> +};
> +
> +#define VIRTIO_IOMMU_TOPO_PCI_RANGE 0x1
> +#define VIRTIO_IOMMU_TOPO_ENDPOINT 0x2
> +
> +struct virtio_iommu_topo_pci_range {
> + __le16 type;...
2019 Nov 22
0
[RFC 13/13] iommu/virtio: Add topology description to
..._iommu.h
@@ -16,6 +16,7 @@
#define VIRTIO_IOMMU_F_BYPASS 3
#define VIRTIO_IOMMU_F_PROBE 4
#define VIRTIO_IOMMU_F_MMIO 5
+#define VIRTIO_IOMMU_F_TOPOLOGY 6
struct virtio_iommu_range_64 {
__le64 start;
@@ -36,6 +37,31 @@ struct virtio_iommu_config {
struct virtio_iommu_range_32 domain_range;
/* Probe buffer size */
__le32 probe_size;
+ /* Offset to the beginning of the topology table */
+ __le16 topo_offset;
+};
+
+struct virtio_iommu_topo_head {
+ __le16 type;
+ __le16 next;
+};
+
+#define VIRTIO_IOMMU_TOPO_PCI_RANGE 0x0
+#define VIRTIO_IOMMU_TOPO_ENDPOINT 0x1...
2020 Mar 05
2
[PATCH v2 1/3] iommu/virtio: Add topology description to virtio-iommu config space
...ig {
> + __le32 offset;
> + __le32 num_items;
> + __le32 item_length;
> +};
> +
> struct virtio_iommu_config {
> /* Supported page sizes */
> __le64 page_size_mask;
> @@ -36,6 +43,25 @@ struct virtio_iommu_config {
> struct virtio_iommu_range_32 domain_range;
> /* Probe buffer size */
> __le32 probe_size;
> + struct virtio_iommu_topo_config topo_config;
> +};
> +
> +#define VIRTIO_IOMMU_TOPO_PCI_RANGE 0x1
> +#define VIRTIO_IOMMU_TOPO_ENDPOINT 0x2
> +
> +struct virtio_iommu_topo_pci_range {
> + __le16 type;...
2020 Mar 05
2
[PATCH v2 1/3] iommu/virtio: Add topology description to virtio-iommu config space
...ig {
> + __le32 offset;
> + __le32 num_items;
> + __le32 item_length;
> +};
> +
> struct virtio_iommu_config {
> /* Supported page sizes */
> __le64 page_size_mask;
> @@ -36,6 +43,25 @@ struct virtio_iommu_config {
> struct virtio_iommu_range_32 domain_range;
> /* Probe buffer size */
> __le32 probe_size;
> + struct virtio_iommu_topo_config topo_config;
> +};
> +
> +#define VIRTIO_IOMMU_TOPO_PCI_RANGE 0x1
> +#define VIRTIO_IOMMU_TOPO_ENDPOINT 0x2
> +
> +struct virtio_iommu_topo_pci_range {
> + __le16 type;...
2020 Apr 21
1
[PATCH v2 1/3] iommu/virtio: Add topology description to virtio-iommu config space
...ig {
> + __le32 offset;
> + __le32 num_items;
> + __le32 item_length;
> +};
> +
> struct virtio_iommu_config {
> /* Supported page sizes */
> __le64 page_size_mask;
> @@ -36,6 +43,25 @@ struct virtio_iommu_config {
> struct virtio_iommu_range_32 domain_range;
> /* Probe buffer size */
> __le32 probe_size;
> + struct virtio_iommu_topo_config topo_config;
> +};
> +
> +#define VIRTIO_IOMMU_TOPO_PCI_RANGE 0x1
> +#define VIRTIO_IOMMU_TOPO_ENDPOINT 0x2
> +
> +struct virtio_iommu_topo_pci_range {
> + __le16 type;...
2020 Feb 14
5
[PATCH 0/3] virtio-iommu on non-devicetree platforms
Add topology description to the virtio-iommu driver and enable x86
platforms. Since the RFC [1] I've mostly given up on ACPI tables, since
the internal discussions seem to have reached a dead end. The built-in
topology description presented here isn't ideal, but it is simple to
implement and doesn't impose a dependency on ACPI or device-tree, which
can be beneficial to lightweight