search for: dnsnaptr

...uot;" reg.1.auth.userId="hft0" reg.1.auth.password="mysecret" reg.1.auth.optimizedInFailover="" reg.1.musicOnHold.uri="" reg.1.server.1.address="jtsd05" reg.1.server.1.port="" reg.1.server.1.transport="DNSnaptr" reg.1.server.2.transport="DNSnaptr" reg.1.server.1.expires="" reg.1.server.1.expires.overlap="" reg.1.server.1.register="" reg.1.server.1.retryTimeOut="" reg.1.server.1.retryMaxCount="" reg.1.server.1.expi...

I set up hints and presence monitoring on some Polycom phones connected to an asterisk server with the expectation that the phones that are "watching" other extensions would be notified when the other extension sis ringing, in addition to the other statuses (on the phone, statuses set by the user on the phone, not registered, etc). I can see when the line is in use, and when it is

Hi We've setup an Asterisk PBX recently and I encountered the following problem: When [mac address]-registration.cfg file includes the FQDN of the Asterisk PBX for the Polycom SoundPoint 501 phones it will not (even try to) register with the Asterisk PBX unless the DNS (it asks) successfully resolves the name: _sip._udp.[Asterisk FQDN]. Did this happen to anyone else? PS - The

Hi, One of my users is in trouble with his polycom phone hooked to an asterisk server. The phone works fine for a few days, and then disappears from the registered sip peers in asterisk. The user is able to place outbound phone calls, but can't receive incoming calls until the network plug is unplugged/plugged. Working line XXYYZZAA24/XXYYZZAA24 10.50.5.186 D A 5060

...r ftp etc for now and just use the Web Interface to get it going with basic features. But the Web UI is a bit confusing with SIP and Line tabs. I have put this on the web interface: SIP > Outbound Proxy: Address = 192.168.0.2 Port = 5060 Server 1: Address = 192.168.0.2 Port = 5060 Transport = DNSnaptr Expires = 300 Register = 1 Line: Display Name = 100 Address = 192.168.0.2 Authentication User ID = 100 Authentication Password = ************* Label = 100 Server 1: Address = 192.168.0.2 Port = 5060 Transport = DNSnaptr Expires = 300 Register = 1 I don't see any registration attempts but Sno...

...reg.1.type="private" reg.1.thirdPartyName="" reg.1.auth.userId="254" reg.1.auth.password="mypass" reg.1.server.1.address="192.168.0.5" reg.1.server.1.port="" reg.1.server.1.transport="DNSnaptr" reg.1.server.2.transport="DNSnaptr" reg.1.server.1.expires="" reg.1.server.1.register="1" reg.1.server.1.retryTimeOut="" reg.1.server.1.retryMaxCount="" reg.1.server.1.expires.lineSeize="&qu...

...rivate" reg.1.lcs="" reg.1.thirdPartyName="" reg.1.auth.userId="3310" reg.1.auth.password="3310" reg.1.server.1.address="192.168.35.1" reg.1.server.1.port="5060" reg.1.server.1.transport="DNSnaptr" reg.1.server.1.expires="" reg.1.server.1.expires.overlap="" reg.1.server.1.register="1" reg.1.server.1.retryTimeOut="" reg.1.server.1.retryMaxCount="" reg.1.server.1.expires.lineSeize="" reg....

...ate: 2004/11/08 18:52:16 $ --> <sip> <voIpProt> <local voIpProt.local.port=""/> <server voIpProt.server.1.address="10.0.20.0" voIpProt.server.1.port="5060" voIpProt.server.1.transport="DNSnaptr" voIpProt.server.1.expires="300" voIpProt.server.1.register="1" voIpProt.server.1.retryTimeOut="0" voIpProt.server.1.retryMaxCount="0" voIpProt.server.1.expires.lineSeiz...

I'm trying to figure out how to allow an extension to register more than once. For instance, I have all of these 4 line IP phones that I use with Asterisk and I would like to have a persons extension (say 101) ring at all four lines so that if the person is on the phone they can take another call, but it appears as though if you try to register the same extension more than once then the most

...local overrides file for the phone contain: voIpProt.server.2.expires.lineSeize="" voIpProt.server.2.retryMaxCount="" voIpProt.server.2.retryTimeOut="" voIpProt.server.2.register="" voIpProt.server.2.expires="3600" voIpProt.server.2.transport="DNSnaptr" voIpProt.server.2.port="5060" voIpProt.server.2.address="192.168.2.2" Any ideas? Sample configs would be appreciated if you've got something like this working in the past. Thanks, Nick

I'm stumped on this one and any help would be greatly appreciated. I'm just trying to get my Polycom 601 to have multiple extensions on it. For example, on line 1 I want extension 21, on line 2 I want extension 22, and on line 3 I want extension 23. Ideally I'd actually have each extension appear on 2 lines and therefore filling up all 6. I should be able to do that with the