search for: dl585

Hi Well we are now using HP instead of Dell and have hit a major hurdle. We dont seem to be able to kix any of these boxes. I have been most recently trying on a dl585 and the issue appears to be that the kix kernel does not detect any nic. Its strange as the box can be installed using iso's and the nic appears as eth0: Broadcom NetXtreme II BCM5706 1000Base-T (A2) PCI-X 64-bit 100MHz found at mem fa000000, IRQ 209, node addr 001a4bedcf1c bnx2: eth0: usin...

Package: xen-hypervisor-4.0-amd64 Version: 4.0.1-4 Severity: important *** Please type your report below this line *** Hello Debian Team, I have some strange behavior with a DL585 G7 with only two cpu sockets used (Opteron 6238 Interlagos). I use Debian 6.0 with a XEN Kernel. Every time when I start a DomU, the server makes a hard reset without any kernel panic or output. When I start the same disks in another DL585 G7 with all four cpu sockets used (Opteron 6174 Magny-Co...

Hi folks, I've just spent about six hours messing around with an HP DL585 G2 server trying to get CentOS to go. This box is a dual-CPU with dual cores and 10GB of RAM total. According to the datasheet, the POST screens, and the BIOS, it has the Broadcom embedded NICs in it. The problem boils down to the installed OS (4.4 x86_64) not seeing the NICs. If you do an ls...

Hi I recently installed some hba's into a bunch of these 585's as they are forming a RAC cluster - previously to this they were all using DAS without issue. After the qlogic cards were installed i reinstalled the OS and now once installed the OS will not boot - the box just reboots continuously, it does not even appear to get to grud, although this could be the ilo not displaying

Hi OK another issue trying to get X going on these boxes. It seems to be a HP issue but if anyone knows a solution that would be great. I am using the iLo interface and the hpmouse-1.1.0-73.noarch.rpm driver. As root i can startx and all is well, however when starting X as the oracle user it fails with the following error Exec fail for command "/opt/hp/hpmouse/hpmouse-helper"

Processing commands for control at bugs.debian.org: > reassign 675266 src:xen 4.0.1-4 Bug #675266 [xen-hypervisor-4.0-amd64] xen-hypervisor-4.0-amd64: Hard reset when starting a DomU on HP DL585 G7 // Opteron 6238 Bug reassigned from package 'xen-hypervisor-4.0-amd64' to 'src:xen'. No longer marked as found in versions xen/4.0.1-4. Ignoring request to alter fixed versions of bug #675266 to the same values previously set Bug #675266 [src:xen] xen-hypervisor-4.0-amd64: Hard r...

I've just setup nic bonding on our server (DL585-G7 running Centos 5.5 x86_64) as detailed on the wiki: http://wiki.centos.org/TipsAndTricks/BondingInterfaces and all seems fine but from other "howto's" I've seen on the web, they're should be a /proc/net/bond0/info As far as I can see, I don't have one and I'm not s...

Hello All. I've just started looking into Xen and have a test environment in place. I'm seeing an annoying problem that I thought worthy of a post. Config: I have 2 x HP DL585 servers each with 4 Dual core Opterons (non-vmx) and 16GB RAM configured as Xen servers. These run CentOS 5.1 with the latest updates applied. These system both attach to an iSCSI target which is an HP DL385 running ietd and serving SAN based storage. I have a test VM running CentOS 5.1 also upd...

Using the latest version of syslinux/pxelinux.. When cold pxe booting a HP DL585 G2 (Broadcom NIC), if the pxemenu item is LOCALBOOT 0 and is selected, then a red screen with the following error occurs: Illegal OpCode EAX=000E09AC EBX=00000000 ECX=00000000 EDX=00000000 EBP=00004408 ESI=0000F000 EDI=000045E9 DS=F000 ES=0000 FS=0000 GS=0003 CS:EI...

I've run into an odd (at least to me) performance issue between a samba server and windows 2003. The windows side is w2k3 w/ SP2 on an HP DL585 with HP EVA SAN storage. Linux is CentOS 5 on a Sun X4200 with samba package samba-3.0.25b-1.el5_1.4and a FUSE mounted filesystem (glusterFS). Watching the network tab of task manager while pulling a few large files from the samba server to the fast drive on the windows end I see an oscillat...

Hi All, We have installed CentOS 5.3 x86_64 in an HP DL585 server with AMD Opteron 64 bit processor and 16 GB RAM. The kernel version is 2.6.18-128.el5 . Now this has thrown an error message in /var/log/message, Jul 3 21:41:11 db1 kernel: EDAC k8 MC0: general bus error: participating processor(local node origin), time-out(no timeout) memory transaction t...

...iles will still be open but any local access to the filesystem such as "ls" will hang. The particualr share is no longer accessable through Samba. I end up having to do a hard shutdown as rebooting will also hang trying to close the filesystem. I have found no logged errors. I have 3 HP DL585 with multiple 6404 raid controllers. Two run samba and the other is NFS only. This only occurs on one server but it is unfortunately the busiest one. I have replaced cables and 6404 cards. The filesystems have been checked using xfs_repair. HP diagnostics has been run for hours. One of our other DL...

Hi, I have a problem with isolinux failing to boot a kernel whenever I navigate and trigger the menu via serial console. My test machine is a DL585 G2, with iLO2. Navigating and booting the kernels off of the video console works 100% of the time. With the serial connection however, I _sometimes_ get a "menu.c32: not a COM32R image" error. Sometime it works fine. I suspect the serial connection is sending extra characters. I tried run...

Hi, I am trying to build a rock solid XEN High availability cluster. The platform is SLES 11 SP1 running on 2 HP DL585 both connected through HBA fiber channel to the SAN (HP EVA). XEN is running smoothly and I''m even amazed with the live migration performances (this is the first time I have the chance to try it in such a nice environment). XEN apart the SLES heartbeat cluster is running fine as well and...

Processing commands for control at bugs.debian.org: > close 675266 Bug #675266 [src:xen] xen-hypervisor-4.0-amd64: Hard reset when starting a DomU on HP DL585 G7 // Opteron 6238 Marked Bug as done > thanks Stopping processing here. Please contact me if you need assistance. -- 675266: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=675266 Debian Bug Tracking System Contact owner at bugs.debian.org with problems

I''m currently using the xen-3.0-testing.hg version with the XEN_TARGET_X86_PAE=y complied dom0/hypervisor. I have an HP dl585 with 28GB but the hypervisor boots and says "(XEN) WARNING: Only the first 16 GB of the physical memory map can be accessed...". Xentop shows 16GB. When I boot a RHEL4 2.6.9 hugemem kernel, I can see all 28GB. Any suggestions? Toby Ford USi _________________________...

...5 and RHAS 5 for a while now with mixed success I thought I'd describe my latest challenge. I'll describe this from memory since all the equipment is at work and not contactable from here. I think I've described this config to the list before but here it is again: I have 2 x HP DL585 servers each with 4 Dual core Opterons (non-vmx) and 16GB RAM configured as Xen servers. These run CentOS 5.1 with the latest updates applied. These system both attach to an iSCSI target which is an HP DL385 running ietd and serving SAN based storage. Everything runs fine if I do no migration....

I've been planning to build a dual Opteron server for awhile. I'd like to get people's suggestions on a suitable motherboard. I've looked at the Tyan K8SE (S2892) and K8SRE (S2891) but would like to find more Linux-specific experiences with these boards. Some features I expect are at least 4 SATA (SATA-300?) ports, serial console support in the BIOS, USB 2.0 and IEEE-1394

...stream. > tags 602378 + upstream Bug #602378 [xen-hypervisor-4.0-amd64] xen-hypervisor-4.0-amd64: Live migration of Guests crashes and reboots Added tag(s) upstream. > tags 675266 + upstream Bug #675266 [xen-hypervisor-4.0-amd64] xen-hypervisor-4.0-amd64: Hard reset when starting a DomU on HP DL585 G7 // Opteron 6238 Added tag(s) upstream. > tags 600241 + upstream Bug #600241 [xen-hypervisor-4.0-amd64] Xen Hypervisor can only boot if "acpi=off" parameter is used. Added tag(s) upstream. > tags 595531 + upstream Bug #595531 [xen-utils-common] xen-utils-common: boot="d"...

Hi, I have a HP DL 585 server with Quad Opteron processors and 32 Gbytes of RAM. I would like to know whether CentOS 3.5 x86_64 will recognize all 4 CPUs and 32 Gbytes of RAM. I will also running EDA tools like PriteTime, and Magma on this server. Does CentOS has any issues with these tools? your help on this question is appreciated. Thanks Siva. -------------- next part -------------- An