search for: did_span_1

...by dahdi_echocan_mg2 5128 0 wct4xxp 285696 48 dahdi 180904 100 dahdi_echocan_mg2,wct4xxp geriatrix*CLI> dahdi show channels Chan Extension Context Language MOH Interpret pseudo default default 1 DID_span_1 default 2 DID_span_1 default 3 DID_span_1 default 4 DID_span_1 default 5 DID_span_1 default 6 DID_span_1 default...

...0 0 >>> 0 >>>> >>>> geriatrix*CLI> dahdi show channels >>>> Chan Extension Context Language MOH Interpret >>>> pseudo default default >>>> 1 DID_span_1 default >>>> 2 DID_span_1 default >>>> 3 DID_span_1 default >>>> 4 DID_span_1 default >>>> 5 DID_span_1...

Hi, i managed to connect to Ericsson MD110 with PRI at last. And made a successful call thru asterisk to ericsson. But when i try to call from ericsson to asterisk i got an error on asterisk side. And i couldnt figure out why. Here's my extensions.conf about incoming calls. [DID_span_1] include = DID_span_1_timeinterval_all,${timeinterval_all} DID_span_1_timeinterval_all] exten = s,1,Goto(default,8000,1) I am forwarding all calls coming from PRI trunk to extension 8000 in asterisk. and what i got on debug of asterisk when i create a call from pbx to asterisk.. Extension '...

...ed in both working and non working servers is the following configuration: /etc/asterisk/chan_dahdi.conf --- #include /etc/asterisk/dahdi-channels.conf --- /etc/asterisk/dahdi-channels.conf --- ; Span 1: TE2/0/1 "T2XXP (PCI) Card 0 Span 1" (MASTER) B8ZS/ESF ClockSource group=0,11 context=DID_span_1 switchtype = national signalling = pri_cpe channel => 1-23 context = default group = 63 --- /etc/asterisk/users.conf (asterisk 1.4.22 w/ SVN-branch-2.0-r4657 GUI) --- [span_1] group = 1 hasexten = no switchtype = national signalling = pri_cpe trunkname = Span 1 trunkstyle = digital ; GUI metad...

...1) [JUMP] exten => s,1,Dial(Zap/R2/666666666,15,r) exten => s,2,Goto(s-${DIALSTATUS},1) exten => s-BUSY,1,Goto(HANGUP,s,1) exten => s-NOANSWER,1,Goto(HANGUP,s,1) exten => s-CHANUNAVAIL,1,Goto(HANGUP,s,1) exten => s-CONGESTION,1,Goto(HANGUP,s,1) [HANGUP] exten => s,1,Hangup [DID_span_1] include = default [DID_span_2] include = default I have no idea about where could be the problem. I can't see anything rare in the logs.... Any ideas? Thanks Regards

...ha_Bravo exten = s,1,NoOp(RINGGROUP) exten = s,n,Dial(SIP/3000,3) exten = s,n,Dial(SIP/3001,3) exten = s,n,Voicemail(3000,b) [ringroups-custom-2] gui_ring_groupname = Charlie_Delta exten = s,1,NoOp(RINGGROUP) exten = s,n,Dial(SIP/3002,3) exten = s,n,Dial(SIP/3003,3) exten = s,n,Voicemail(3002,b) [DID_span_1] include = default exten = _X.,1,Goto(ringroups-custom-1,s,1) exten = s,1,ExecIf($[ "${CALLERID(num)}"="" ],SetCallerPres,unavailable) exten = s,2,ExecIf($[ "${CALLERID(num)}"="" ],Set,CALLERID(all)=unknown <0000000>) exten = s,3,Goto(ringroups-custom-1...

...it starts to work again. Is there a problem with g?? Is it a known problem? What might be the solution?? Thank you. PS: While i was monitoring it started to give same error with dahdi/1 config too. I got no alarm on dahdi channels or ericsson side. dahdi show channels are 4 DID_span_1 default In Service core show calls 12 active calls and

...tem.conf --- span = 1,1,0,esf,b8zs bchan = 1-23 dchan = 24 echocanceller = mg2,1-240 loadzone = us defaultzone = us -- other blocks: [span_1] group = 1 usecallingpres=no hasexten = no switchtype = 5ess signalling = pri_net trunkname = Span 1 trunkstyle = digital hassip = no hasiax = no context = DID_span_1 dahdichan = 1-23 in extensions.conf exten => _XXXXXXX,n,Dial(DAHDI/g1/9${EXTEN}) dahdi-channels.com ; Span 1: WCT1/0 "Digium Wildcard TE110P T1/E1 Card 0" (MASTER) B8ZS/ESF group=1 context=from-pstn ;switchtype = national switchtype = 5ess signalling = pri_net channel => 1-23...