search for: dialextensions

I have set up an auto attendant and all is working but I am bothered by a long pause when switching between menus. This pause is between 5 and 7 seconds and is quite annoying. Is there anyway to address this. One other thing I find interesting is that when I move from the main menu to the sub menu the delay is there but when I move from the sub menu to the main menu the delay is not there.

...erid=no" and all would be well, but this didn't do any good. After playing a bit longer I just set the following: exten => 900,2,set(CALLERID(num)="606-555-1212") exten => 900,3,set(CALLERID(name)="Outside Call") exten => 900,4,Dial(${DIALEXTENSIONS},${RINGTIMER},${DIAL_OPTIONS}) Now all works well. So is there another option somewhere to keep asterisk from killing a transfer without callerid? This happened on both 1.4.17 & 1.4.18.1. Thanks, Ken -------------- next part -------------- An HTML attachment was scrubbed... URL: http://li...

The card is an ASUSCOM ISDNLink PCI (passive) and the circuit is from Qwest (in the US). I will be using this circuit only for voice (I'm doing this because of the poor quality of my POTS lines). I've compiled Hisax (as a module) into my 2.4.25 kernel, and with 'modprobe hisax type=35 protocol=4 id=hisax' I get the following: Apr 7 10:34:24 dev kernel: HiSax: Linux Driver for

Apologies if this is a repeat: I trawled through the archives and couldn't find a reasonable answer, so I'm asking here. I have an Asterisk install connecting from behind a NAT device (DSL modem) to a SIP proxy (in my case, Broadvoice). I have an sjphone softphone on a Windows PC also behind the NAT device that connects to the Asterisk install, and using this setup I've been pretty