search for: dellutri

...0. For each of these cards, the BIOS shows the card in slot 1 as a PCI Bridge. lspci reports two identical video cards at 03:00.0 and 04:00.0. Though it's easy to set up two screens properly, xinerama would probably be required in an xorg.conf to get all four screens working properly. -- Dale Dellutri

..., I set up the iptables I want and then do service iptables save If I was worried about changes, I guess I'd modify S08iptables to check that nothing has changed, or add an S07checkiptables script. (This is my first post to this mailing list, so I hope I've done it correctly.) -- Dale Dellutri

...oute, it shows the route (0B0B0B0B = 11.11.11.11), but not the source address. # cat /proc/net/route Iface Destination Gateway Flags RefCnt Use Metric Mask MTU Window IRTT eth0 0B0B0B0B 9405A8C0 0007 0 0 0 FFFFFFFF 0 0 0 ... Where is the source address kept? -- Dale Dellutri

Hi all, Has anyone seen something like this before: I want to use a laptop as a KVM console. Basically when a technician goes to one of our datacentres, or clients he has to look for a free LCD, keyboard & mouse to connect to a server (no network access, reinstall, troubleshoot failed kernel / HDD, etc). And then hopefully there's an open power socker in that cabinet. So I'm

Does anyone know of a cheap temperature sensor that will work with Linux? I don't need a fancy monitoring appliance, I just want a simple sensor that I can connect to one of my monitoring servers to let me know if the server room is getting hot. -- Bowie

I have an old dell 2450 that was running kernel 2.6.18-308.1.1.el5 I then upgraded it via yum to 2.6.18-308.1.1.el5. Now when the server boots to the new kernel, 2.6.18-308.1.1.el5 it hangs on "starting iSCSI" and the weird thing is when I tried to switch back to the older 2.6.18-308.1.1.el5 kernel it works fine but the network script fails to start. I'm not really sure what I should

Hi -- My CentOS 5.8 server crashed, leaving no clue why. The last entry in /var/log/messages is a dhcpd notice around 4:00am, followed by the restart message when I rebooted. The only clue that I have is that the fan was running full speed when I restarted it. The fan slowed to normal speed. Any ideas what I can do to find out the cause? -- Michael Eager eager at eagercon.com 1960 Park

A CentOS 6.3 box ("host") runs several KVM virtual machines, each of which has two interfaces attached to the two bridges br1 and br2 (and each thus has two IP's; one on 192.168.0.0/22 and one on 192.168.4.0/22); net.ipv4.ip_forward on the host is 1. Simplified diagram: host +---------------+ |

I'm running an openvpn server on a CentOS machine - that is my excuse for posting my query here - and I'm wondering if there is some way of finding all the clients (not just those connected at this moment) who have been registered as clients of the openvpn server? -- Timothy Murphy e-mail: gayleard /at/ eircom.net School of Mathematics, Trinity College, Dublin 2, Ireland

Hello, Every 15 minutes I get an error on NFSv4 server: rpc.idmapd[1889]: nss_getpwnam: name '0' does not map into domain 'aaa.test.home' I have fully updated Centos 6.4 machine. All shares seems to be ok. Does anybody know, what does this error mean? Thank You. -- mv

So, after some discussion of our new control workstations, we are iterating in on a solution; we are looking at a 1U short-depth SuperMicro SuperServer 5017R-MF with a graphics card in the PCI-Ex16 expansion slot. However, the display requirements have increased to 3 or more monitors for future expansion, so I was wondering whether anyone had any experience with triple- or quad-display single card

Hi, We want to display on a small LCD screen next to our meeting rooms and optionally let people book the room from the panel. We looked at different providers and those solutions either works with Exchange or Lotus Notes... Since I already have code to fetch events from any CalDAV/WebDSV servers, I'm looking at building the system myself. So I'm wondering if any of you can recommend

I have a user who wants to have 4 monitors attached to his CentOS 6.4 system. I know that you can't use both on-board video and a PCI video card at the same time, but what about two PCI video cards? The system seems to recognize them as shown by the lspci -v output below, but I can't get Xorg to use the second card. Has anyone done this? If so, what is the trick to get it to work?

Has anyone an idea, how to force users to print b/w on a color printer. We are in the process to deploy color printers to some of our offices where they use centos 5.5 as their OS. They need the printers to print some advertisement material. But for everything else, they don't need it. And because of the costs of the color printing we would like to force them to use B/W where not explicitly

I am trying to assemble or purchase a set of CentOS 6 compatible SFF workstations, and am finding it incredibly frustrating to do so. hardware.redhat.com is so slow as to be useless and provides almost no information about each of the 1,300 or so products listed in their database; clicking through them one at a time is incredibly frustrating (and about half of them are discontinued or out of stock

I searched the list archives and I found one answer to this which suggested I should install the PG yum repos. I don't like that answer for reasons which follow. I'm running Centos 6.0 freshly installed, and I've decided that with this box I'm sticking as much as possible to just the CentOS repos that go with that release. I figure in particular I do not need any PG features

Yes, really. I've got hundreds of the damn things here at home, and I want to go through them and get rid of them all. But... to do that I want to read them. I have both a 5.25" and a 3.5" drive, both are plugged in, but in the BIOS, all I see is the 3.5". Fine, I figure I'll take care of those. Nope. I see /dev/fd0 once I've booted up, but neither konqueror nor

Hello, I'm slightly off-topic here, but it is somewhat CentOS related! I'm in search of some hardware that consumes a low amount of power for use as a test-bed for Linux, various coding projects, and LAN services. 1) Low power consumption (10-15W ... maybe 30W at most) 2) Must run Linux without too much fuss (CentOS or otherwise) 3) Must have two NICs (fast ethernet or better) 4) Memory

I'm replacing an ancient Solaris 'ipf' firewall/router with a brand new CentOS 6.3 system. In the olden days, I successfully used the attached iptables script (as /etc/rc.local) on Red Hat 5.x systems, but this doesn't seem to be quite working on the new system. Specifically, while it seems to be routing ok, you cannot connect to anything on the inside net (e.g., with ssh or