Displaying 5 results from an estimated 5 matches for "delinfo".
2007 Aug 27
1
Changes to usbhid-ups driver
...to the
serial number, model and vendor names. By doing so, we would probably
get more accurate information on especially the serial number, since
this is located in non-standard locations for several subdrivers. If we
get a match, we could be sure that this is the same device and need not
DELCMD/DELINFO whatever we got already, but could simply update the
pointers to the parsed report descriptor (which is a lot lighter on the
load).
Another thing is that we could probably reject devices (also, depending
on whether a subdriver supports this) if they are not a UPS. We could
easily check for this in...
2013 Jun 26
0
smsbrasil-0.0.2 driver
...2442.111280 send_to_one: PONG
2445.566594 smsBR_RecAnswer: Started
2445.681823 smsBR_RecAnswer: Finished
2448.174522 send_to_one: PONG
2450.569001 smsBR_RecAnswer: Started
2450.684810 smsBR_RecAnswer: Finished
2450.684884 send_to_all: SETINFO output.voltage "0.0"
2450.684946 send_to_all: DELINFO ups.alarm
2450.684976 send_to_all: SETINFO ups.status "OL BYPASS"
2455.571353 smsBR_RecAnswer: Started
2455.686801 smsBR_RecAnswer: Finished
2455.686885 send_to_all: SETINFO ups.load "0.0"
2455.686931 send_to_all: SETINFO battery.runtime "0"
2460.576291 smsBR_RecAnswer...
2013 Jun 26
3
smsbrasil-0.0.2 driver
Hello again!
Sorry for not being able to test this before.
Ulisses, please apply the patch to fix typo in my e-mail address.
I've compiled it against nut-2.6.5 about 10 hours ago. It was everything
fine until now. I'm seeing CHRG but the ups led wasn't blinking at all.
Vendor software was strangely showing charging also. I am assuming this is
expected behavior.
I've set the
2015 Mar 06
0
nutdrv_atcl_usb
...input.voltage "240.0"
15.779532 command: (8 bytes) => 80 06 04 03 51 50 49 00
15.787384 send: QPI
16.789375 read: could not claim interface 0: Device or resource busy
(-110)
16.789416 qx_process_answer: short reply (ups.firmware.aux)
16.789437 send_to_all: DELINFO input.voltage
16.789460 command: (8 bytes) => 80 06 03 03 51 31 00 2f
16.795377 send: Q1
17.011385 read [ 0]: (8 bytes) => 28 32 34 30 2e 30 20 30
17.019380 read [ 8]: (8 bytes) => 30 30 2e 30 20 32 33 39
17.027380 read [ 16]: (8 bytes) => 2e 30 20 30 30...
2015 Mar 05
5
nutdrv_atcl_usb
On Mar 5, 2015, at 2:34 AM, Jakub <jakub.scepka at gmail.com> wrote:
> Come on, it started to be interesting!
Do you have one of these UPSes?
If so, here was Dan's email about a branch to test:
> If you still can't get it to work with nutdrv_atcl_usb, another
> approach could be worth considering.
>
> Since this UPS seems to be supported by UPSmart2000I, it could