Displaying 16 results from an estimated 16 matches for "ddddddd".
Did you mean:
dddddd
2006 Jul 20
2
how to print table with more columns per row?
When printing a table it is broken at some point (depending how long are
the associated names)
>>> see example below.
Is there a way to control number of columns being printed for a given
chunk of the table?
Best regards,
Ryszard
> z5
AAAAAAA BBBBBBB CCCCCCC DDDDDDD EEEEEEE FFFFFFF GGGGGGG HHHHHHH
IIIIIII
AAAAAAA 1.00 -0.69 -0.54 -0.88 NA NA NA NA
-0.88
BBBBBBB -0.69 1.00 0.65 0.82 NA NA NA 1
0.83
CCCCCCC -0.54 0.65 1.00 0.49 NA NA NA NA
0.94
DDDDDDD -0.88 0.82...
2008 Jan 07
2
Powerware 5115 on Debian Etch
I've got some strange problem with NUT on my 5115 on Debian Etch:
---snip---
$ sudo ./bcmxcp_usb -DDDDDDD -a 5115
Network UPS Tools - BCMXCP UPS driver 0.13 (2.3.0-1181)
Warning: This is an experimental driver.
Some features may not function correctly.
debug level is '7'
Can't set POWERWARE USB configuration
Unable to find POWERWARE UPS device on USB bus
Things to try:
- Connect UPS d...
2013 Jan 31
1
CyberPower on OpenIndiana
...228, 6 2013-01-30 22:20 /devices/pci at 0,0/pci15d9,631 at 1d/hub at 1/input at 1:hid_-124_4
My ups.conf has:
[cyberpower]
driver = usbhid-ups
port = /dev/usb/hid2
desc = "CP1500PFCLCD RCA102-3I1 CPS"
However usbhid-ups doesn't seem to like it:
# usbhid-ups -DDDDDDD -a cyberpower
Network UPS Tools - Generic HID driver 0.37 (2.6.5)
USB communication driver 0.31
0.000000 send_to_all: SETINFO driver.parameter.port "/dev/usb/hid2"
0.000052 debug level is '7'
0.000331 upsdrv_initups...
0.001113 No appropriate HID device...
2015 Aug 18
1
Liebert IntelliSlot Unity Card IS-UNITY-DP snmp UPS-MIB.upsIdentManufacturer '1.3.6.1.2.1.33.1.1.1.0' problem
...t-2.7.2 (bin package)
Liebert IntelliSlot Unity Card IS-UNITY-DP
ups.conf:
......
? mibs = ietf
? snmp_version = v1
......
The problem is that the card responds to other snmp (v1,2c,3) requests normally but not to the 1.3.6.1.2.1.33.1.1.1.0 (UPS-MIB.upsIdentManufacturer).
# snmp-ups -a laes2ups -DDDDDDD
Network UPS Tools - Generic SNMP UPS driver 0.72 (2.7.2)
?? 0.000000???? debug level is '7'
?? 0.000516???? SNMP UPS driver : entering upsdrv_initups()
?? 0.000555???? SNMP UPS driver : entering nut_snmp_init(snmp-ups)
?? 0.029476???? SNMP UPS driver : entering load_mib2nut(ietf)
?? 0.02950...
2013 Apr 03
1
snmp definitions problem
...? have a necron snmp ups.
nut-scanner cant find it. i tried to add with these definition but it fails..
[test5-ups] driver = snmp-ups port = 10.9.40.19 community = asdf12 desc ="test"
i run driver with debugging , result is ,
root at upsviewer-debian:/usr/local/ups/bin# ./snmp-ups -DDDDDDD -a test5-upsNetwork UPS Tools - Generic SNMP UPS driver 0.68 (2.6.5) 0.000000 send_to_all: SETINFO driver.parameter.port "10.9.40.196" 0.000043 debug level is '7' 0.000490 SNMP UPS driver : entering upsdrv_initups() 0.000501 SNMP UPS driver : entering nut_snmp_init(snmp-up...
2013 Apr 05
0
SNMP connection problem
...? have a necron snmp ups.
nut-scanner cant find it. i tried to add with these definition but it fails..
[test5-ups] driver = snmp-ups port = 10.9.40.19 community = asdf12 desc ="test"
i run driver with debugging , result is ,
root at upsviewer-debian:/usr/local/ups/bin# ./snmp-ups -DDDDDDD -a test5-upsNetwork UPS Tools - Generic SNMP UPS driver 0.68 (2.6.5) 0.000000 send_to_all: SETINFO driver.parameter.port "10.9.40.196" 0.000043 debug level is '7' 0.000490 SNMP UPS driver : entering upsdrv_initups() 0.000501 SNMP UPS driver : entering nut_snmp_init(snmp-up...
2010 Apr 02
1
GE lanpor ups monitored with SNMP stop to monitor after upgrade
Hello All !
Recently I have upgraded NUT to 2.4.1, and now I can't monitor old IMV
LanPro S3 UPS with old SNMP board.
Previously it is monitored OK, but now snmp-ups refuses to start:
[root at perforce /usr/local/etc/nut]# /usr/local/libexec/nut/snmp-ups -a
lanproups -DDDDDDD
Network UPS Tools - Generic SNMP UPS driver 0.44 (2.4.1)
debug level is '7'
SNMP UPS driver : entering upsdrv_initups()
SNMP UPS driver : entering nut_snmp_init(snmp-ups, 192.9.100.149, v1,
public)
SNMP UPS driver : entering load_mib2nut(auto)
load_mib2nut: trying apcc mib
nut_snmp_get(.1....
2020 Apr 29
2
SNMP shutdown timing out
...ode. The UPS will turn back on when utility power is restored.
Attempting to turn off a UPS that is not on battery will result in a
badValue error." so tests are being done with the UPS on battery.
However, when I try to tell it to shut down the UPS it fails with a timeout.
$ sudo snmp-ups -DDDDDDD -a nutdev1 -k
Network UPS Tools - Generic SNMP UPS driver 0.97 (2.7.4)
0.000000 send_to_all: SETINFO driver.parameter.port "192.5.37.191"
0.000027 send_to_all: SETINFO driver.parameter.mibs "apcc"
0.000044 send_to_all: SETINFO driver.parameter.secLevel "...
2013 Jun 10
1
SSHD relative pathing problem
Hi :)
I hope this isn't just a problem in my understanding, but anyway.
I am using `OpenSSH_6.2, OpenSSL 1.0.1e 11 Feb 2013` on an Arch Linux
system, and I got caught out on this error for several days, and I'm not
sure if its a bug for you guys or what.
Anyway, what I noticed, was that when I specifyied a custom HostKey in the
host file or by relative path, that is:
`sshd -Dd -f
2012 May 10
3
battery.charge and other fixes needed for X-Power Tigra 1kVA
...uctBrochures/XPower/Tigrablack.pdf )
this Xpower ups has three (3) 12V batteries.
I used nombattvolt 41.1 since that seemed to be similar also to the Best
610-1000. As for battvoltmult, I must say I also experimented here.
The bestups driver seems to run ok:
C:\PROGRA~1\NUT\bin>bestups.exe -DDDDDDD -a ups1
Network UPS Tools - Best UPS driver 1.06 (2.6.3-3534:3545M)
0.000000 send_to_all: SETINFO driver.parameter.port "com1"
0.000000 send_to_all: SETINFO driver.parameter.id
"610,1000,230,230,10.0,36.0"
0.000000 send_to_all: SETINFO driver.parameter.n...
2013 May 01
1
Powercom BNT-1500AP serial config
...r.version: 2.4.3
driver.version.internal: 0.12
input.frequency: 80.12
input.voltage: 99.8
input.voltage.nominal: 120
output.frequency: 80.12
output.voltage: 99.8
ups.load: 9.0
ups.mfr: PowerCom
ups.model: KIN-1500AP
ups.model.type: KIN
ups.serial: Unknown
ups.status: OL
/lib/nut/powercom -a ups -DDDDDDD: Output attached.
Later,
--
Bill Carlson
Anything is possible, given Time and Money.
-------------- next part --------------
0.000000 debug level is '7'
0.000989 Flow control disable
0.001114 Num of bytes requested for reading from UPS: 16
0.150029 Num of bytes received fro...
2014 Mar 06
1
PowerWalker VFI 3000RT LCD: Device or resource busy
...09:30 iron kernel: usb 2-1.7: New USB device strings: Mfr=3,
Product=1, SerialNumber=0
Mar 6 10:09:30 iron kernel: usb 2-1.7: Product: USB UPS
Mar 6 10:09:30 iron kernel: usb 2-1.7: Manufacturer: PPC
...
--- clip ---
disconnected -> new device loop with increased device number
# blazer_usb -DDDDDDD -a pw1 -u root
--- clip ---
Network UPS Tools - Megatec/Q1 protocol USB driver 0.09 (2.6.5)
0.000000 send_to_all: SETINFO driver.parameter.port "auto"
0.000040 debug level is '7'
0.000459 Checking device (06DA/0005) (002/062)
0.004289 - VendorID: 06da...
2020 Apr 29
0
[EXTERNAL] SNMP shutdown timing out
...de. The UPS will turn back on when utility power is restored. Attempting to turn off a UPS that is not on battery will result in a badValue error." so tests are being done with the UPS on battery.
However, when I try to tell it to shut down the UPS it fails with a timeout.
$ sudo snmp-ups -DDDDDDD -a nutdev1 -k
Network UPS Tools - Generic SNMP UPS driver 0.97 (2.7.4)
0.000000 send_to_all: SETINFO driver.parameter.port "192.5.37.191"
0.000027 send_to_all: SETINFO driver.parameter.mibs "apcc"
0.000044 send_to_all: SETINFO driver.parameter.secLevel "...
2007 Mar 12
5
index.rb:384 [BUG]
Hi folks,
I''ve working and playing with acts_as_ferret and follow this fantastic
tutorial:
http://www.railsenvy.com/2007/2/19/acts-as-ferret-tutorial
When I try to implement the field storage tip, it crash. So, I try to
make it via script/console:
1. I have a simple model called Articles:
class Article < ActiveRecord::Base
acts_as_ferret :fields =>
2011 Oct 06
1
Differences between USB and serial on an MGE Pulsar Evolution 3000
...any advice as to why the nominal voltage is
decoded incorrectly (or even describe how it's decoded so I can
investigate it myself) then that would be appreciated. Advice on how to
add the extra parameters in would also be appreciated.
Many thanks in advance,
Neil.
Extract from mge-shut -DDDDDDD
------------------------------
12.207366 entering hid_get_value(UPS.PowerConverter.Output.Voltage)
12.207371 entering lookup_path(UPS.PowerConverter.Output.Voltage)
12.207375 parsing UPS
12.207384 Looking up UPS
12.207387 hid_lookup_usage: found 840004
12.20738...
2012 Jan 12
1
Debian Squeeze / Powerware 9135 450KVA UPS
Hi All,
I'm a system administrator of a large data center, and I've recently
replaced the machine that acted as the nut master for our
cluster/cloud. The machine that was interfacing with our Powerware
9135 450KVA 3 phase UPS, not to confused with Eaton's Powerware 9135,
and was a Fedora Core 4 box running nut version 2.0.3-4 connected by a
serial cable.
We are using these versions