search for: dataport

I have a box running CentOS 5.3 with two Dataport removable drive bays installed on the second IDE interface (/dev/hdc and hdd). I want to configure it so I can plug in and mount various drives at different times, including different size drives. So far it will only recognize the first drive I plug in, and only if I boot the box after insertin...

...) correctly when wall power fails? Yes it does and also the other Synology Nas which is attached via the network. It brings the Synology NAS in a safe-mode. > Is the Mac protected by the same APC UPS as the Synology NAS? Yes it is. The power cable of the Mac is connected to the APC UPS. The dataport of the APC UPS is connected via USB with the Synology NAS. > Do you have upsd and possibly upsmon running on the Mac? Standard not when I start, sudo upsmon -D, only upsmon and not upsd. > What does command ps -elf | grep -E "ups[dms]|nut? report on the Mac? With copy and p...

Hi, I'm trying to disconnect some iSCSI targets, but can't seem to. [root at localhost ~]# iscsiadm -m session tcp: [1] 192.168.2.202:3260,1 iqn.2011.01.22.freenas.nvr:500gb tcp: [3] 192.168.2.200:3260,1 iqn.2011-2.za.co.securehosting:RAID.thin3.vg0.1tba tcp: [4] 192.168.2.202:3260,1 iqn.2011.01.22.freenas.nvr:extent0 tcp: [5] 192.168.2.200:3260,1

..., do you run the command "upsdrvctl shutdown" ? Do you see or hear anything to suggest that the delayed UPS shutdown has happened? > Is the Mac protected by the same APC UPS as the Synology NAS? Yes > it is. The power cable of the Mac is connected to the APC UPS. The > dataport of the APC UPS is connected via USB with the Synology NAS.? Apart from these points, it looks as if NUT is running correctly on the Synology NAS. Now for the Mac: You will need to have upsmon running on the Mac with a MONITOR declaration of the form MONITOR UPS at NAS 1 <upsmaster> &l...

...rdtsc + rdtsc + or [NextSocket],ax +.skip_rdtsc + pop ecx + pop edx + pop ebx +%endif +%macro udelay 0 + jmp short %%skip +%%skip: rep nop +%endmacro + xor eax,eax + cli ; disable interrupts + or al, 80h ; disable NMI? + out 70h,al ; write to indexport 70h + udelay + in al,71h ; read from dataport 71h + udelay + mov ah,al ; store in AH + xor al,al ; AL = 0 + out 70h,al ; enable NMI + udelay + sti ; enable interrupts + xor [NextSocket],ah +%endif ; ; Now attempt to get the BOOTP/DHCP packet that brought us life (and an IP ; address). This lives in the DHCPACK packet (query info 2)...

Hello, I am running NUT on a Synology NAS with attached a USB APC UPS. I am trying to connect and shutdown a Mac OS X system. I have installed the NUT software and it looks like there is connection with the master but when battery gets low the Mac is not shutdown. I don't know if I have to configure upssched.conf and where? On the slave (Mac) ? It will be great to know before I will start